Focaljet - Ford Focus Forums - View Single Post

**natedog_1959** · 06-07-2006, 01:37 PM

It sounds like you two are contradicting one another. CFM says it's a one man job without a pressure bleeder and belacyrf says it's a one man job only with a pressure bleeder. Which is it?

By pumping the brakes will I drain the fluid resevoir too fast for one person to refill and then continue pumping? Sorry for all the questions, I just want to do it right the first time. Nate.

06-07-2006, 01:37 PM	#4
natedog_1959 Senior TEAM Member Join Date: Jan 2005 Location: Nashville, TN Posts: 1,290	Re: Russell Brake Bleeders? It sounds like you two are contradicting one another. CFM says it's a one man job without a pressure bleeder and belacyrf says it's a one man job only with a pressure bleeder. Which is it? By pumping the brakes will I drain the fluid resevoir too fast for one person to refill and then continue pumping? Sorry for all the questions, I just want to do it right the first time. Nate. __________________ 2004 SVT Focus Black w/ red inserts, HID's, Audiophile. Show: Euro Upper Grille, Tinted Corners, 5% tint on rear three windows, Black EAP Wheels w/ black lug nuts. Go: Steeda STS, SRI, STB, 2 Mounts, MSD Coil/Wires, Side Gapped Cu Plugs, SS Brake Lines, F2 Rear Sway, SRF Throttle Body, ORP, Borla Exhaust, Grounding Kit, SVT Salvage battery box and Odyssey battery, COSDEVSVT Harness Bar, Corbeau Harness, 215/45/17 Dunlop Z1's, Multimatic/KYB suspension, P-51 shims, Centric rotors/Hawk HPS pads.