Focaljet - Ford Focus Forums - View Single Post - Suzuki GSXR 750 quad Throttle Body Install on 2.3 L Duratec

**JohnStranahan** · 12-14-2007, 08:25 PM

Ah. Finally some help instead of resistance. Resistance is futile.

Thanks for the tips on glues. I like the Duramix in that it is semilflexible like the plastic. This is what I need. I like this product which is a two part glue. It always helps when it says for ABS. A web retailer would be nice, but I do have a Automotive paint contact near the house that may be able to order it.

http://solutions.3m.com/wps/portal/3M/en_US/3MAutomotive/Aftermarket/Products/Product-Catalog/?PC_7_RJH9U5230GE3E02LECFTDQCEK3_nid=MTWG92XKQQgsD DC4KLKK5WglNQJMCJH1B8bl

I do have Gorilla glue. It will probably foam quite a bit in the spot I need it. The seam I plan to seal is on the inside of the case where I removed a long island for the stock Suzuki Air filter. The seam is sealed on the outside with copper RTV. RTV works better if it is held by two surfaces. I can use a layer of this semi rigid material to build up a flexible and strong smooth seam on the inside. I can also use this sealant around my 4 inch flanged inlet. I have a black plastic flanged inlet coming that has a little bit bigger flange. This will lead to a neater job on the corners when it is bolted up.

It used to be that people were proud of the hours that they spent on a pet project like a hot rod, restoration, cabinet, etc.

12-14-2007, 08:25 PM	#60
JohnStranahan Junior Member Join Date: Dec 2004 Posts: 96	Re: Suzuki GSXR 750 quad Throttle Body Install on 2.3 L Duratec Ah. Finally some help instead of resistance. Resistance is futile. Thanks for the tips on glues. I like the Duramix in that it is semilflexible like the plastic. This is what I need. I like this product which is a two part glue. It always helps when it says for ABS. A web retailer would be nice, but I do have a Automotive paint contact near the house that may be able to order it. http://solutions.3m.com/wps/portal/3M/en_US/3MAutomotive/Aftermarket/Products/Product-Catalog/?PC_7_RJH9U5230GE3E02LECFTDQCEK3_nid=MTWG92XKQQgsD DC4KLKK5WglNQJMCJH1B8bl I do have Gorilla glue. It will probably foam quite a bit in the spot I need it. The seam I plan to seal is on the inside of the case where I removed a long island for the stock Suzuki Air filter. The seam is sealed on the outside with copper RTV. RTV works better if it is held by two surfaces. I can use a layer of this semi rigid material to build up a flexible and strong smooth seam on the inside. I can also use this sealant around my 4 inch flanged inlet. I have a black plastic flanged inlet coming that has a little bit bigger flange. This will lead to a neater job on the corners when it is bolted up. It used to be that people were proud of the hours that they spent on a pet project like a hot rod, restoration, cabinet, etc.