Focaljet - Ford Focus Forums - View Single Post - Suzuki GSXR 750 quad Throttle Body Install on 2.3 L Duratec

**JohnStranahan** · 01-03-2008, 12:29 PM

the center two ports are only off from the throttle bodies about 1/4 inch. The outside two ports are off 3/4 inch. I plan to correct this offset by angling the short tubes coming out of the manifold and by porting where possible.

The stiff urethane motor mounts would give me more clearance at the front. I thought about those.
John

01-03-2008, 12:29 PM	#102
JohnStranahan Junior Member Join Date: Dec 2004 Posts: 98	Re: Suzuki GSXR 750 quad Throttle Body Install on 2.3 L Duratec the center two ports are only off from the throttle bodies about 1/4 inch. The outside two ports are off 3/4 inch. I plan to correct this offset by angling the short tubes coming out of the manifold and by porting where possible. The stiff urethane motor mounts would give me more clearance at the front. I thought about those. John