Focaljet - Ford Focus Forums - View Single Post

**99dot** · 05-22-2008, 02:16 AM

If your getting quite a bit of oil change out your PCV valve. mine was filling up every few days as I was using http://focus.c-f-m.com/index.asp?Pag...ROD&ProdID=948

which is made out of plastic, and is located a bit to close to the headers. I switched back to a stock one and now I have just a few drops in a week. I'm not seeing any P0171 lean codes and the car is running great.

Just passed emmisions today, OBD2 scan and o2 gas engine Analyzer on the dyno to 3500 rpm. I can't believe how well the car is running.

And I do all my own tunning

05-22-2008, 02:16 AM	#4
99dot TEAM Member Join Date: Feb 2005 Location: Kent Valley Posts: 915	Re: Oil separator If your getting quite a bit of oil change out your PCV valve. mine was filling up every few days as I was using http://focus.c-f-m.com/index.asp?Pag...ROD&ProdID=948 which is made out of plastic, and is located a bit to close to the headers. I switched back to a stock one and now I have just a few drops in a week. I'm not seeing any P0171 lean codes and the car is running great. Just passed emmisions today, OBD2 scan and o2 gas engine Analyzer on the dyno to 3500 rpm. I can't believe how well the car is running. And I do all my own tunning __________________ Mods: Custom turbo kit thanks to Supersnail Fab and OrangeSvt03. and other things! Clutch is here,Thank you Southbend for a great product and service and the clutch will hold 350ftlb of Torque. SVTF 353.4hp and 322.6Tq at 19psi with VCT