The Ford Focus Forum | Powered by Focaljet - View Single Post - Suzuki GSXR 750 quad Throttle Body Install on 2.3 L Duratec

**JohnStranahan** · 07-06-2008, 12:27 AM

I moved the air inlet on the airbox up for clearance reasons. I removed part of the airbox to make it thinner. Most of the cover with its large internal volume should fit. Pic 7 shows the inside with the 4 inch inlet giving a good dose of air to the trumpets. The two center trumpets are just visible. These are longer. All four may be long when I finish up.
Note the stiffening rail in the first pic is the one I modified and added to the throttle bodies.

I may learn to weld plastic to put a cover on the box. I have done some reading on it.

John

07-06-2008, 12:27 AM	#150 (permalink)
JohnStranahan Junior Member Join Date: Dec 2004 Posts: 98	Re: Suzuki GSXR 750 quad Throttle Body Install on 2.3 L Duratec I moved the air inlet on the airbox up for clearance reasons. I removed part of the airbox to make it thinner. Most of the cover with its large internal volume should fit. Pic 7 shows the inside with the 4 inch inlet giving a good dose of air to the trumpets. The two center trumpets are just visible. These are longer. All four may be long when I finish up. Note the stiffening rail in the first pic is the one I modified and added to the throttle bodies. I may learn to weld plastic to put a cover on the box. I have done some reading on it. John Last edited by JohnStranahan; 07-06-2008 at 09:51 AM.