The Ford Focus Forum | Powered by Focaljet - View Single Post

**blueovaldave** · 12-22-2008, 02:46 PM

I don't have any experience with the EBC rotors but I can tell you that in 20 years of the car business most of the aftermarket rotors do not take well to being
machined.

They are so hard that they don't react well to being machined. Unless you are getting a vibration when braking I would pad slap it.

I run stock SVT rotors on my car and use them on the track and street and just swap the a set of CarboTech pads back and forth with no problems or concerns.

12-22-2008, 02:46 PM	#6 (permalink)
blueovaldave Senior TEAM Member Join Date: Dec 2002 Location: Fredrick, Md Posts: 3,561	Re: EBC Rotors: Replace or Resurface?? I don't have any experience with the EBC rotors but I can tell you that in 20 years of the car business most of the aftermarket rotors do not take well to being machined. They are so hard that they don't react well to being machined. Unless you are getting a vibration when braking I would pad slap it. I run stock SVT rotors on my car and use them on the track and street and just swap the a set of CarboTech pads back and forth with no problems or concerns. __________________ 2001 S2 Liquid Grey, PWSC 252 hp, 195 lb/tq www.strikeforce1.com http://www.emraracing.org