The Ford Focus Forum | Powered by Focaljet - View Single Post

**ehancock** · 06-29-2009, 08:36 AM

There is a a TON of information on this topic if you go back and look through the duratec tuning chat.

First, I have no personal experience with the matter. That being said, in all of the old threads it was recommended not to use bigger than crane stage 2's for a daily driver. I do not remember the crower stage 3 specs off of the top of my head, but you'll probably need new pistons with valve reliefs in them.

06-29-2009, 08:36 AM	#2 (permalink)
ehancock Senior TEAM Member Join Date: Mar 2008 Location: Plymouth, MI Posts: 1,301	Re: Crower Stage III cams on a DD... There is a a TON of information on this topic if you go back and look through the duratec tuning chat. First, I have no personal experience with the matter. That being said, in all of the old threads it was recommended not to use bigger than crane stage 2's for a daily driver. I do not remember the crower stage 3 specs off of the top of my head, but you'll probably need new pistons with valve reliefs in them.