Tial 50mm BOV - Focaljet

**IslandFocus** · 11-29-2007, 08:56 PM

Does this BOV come with the mounting flange and clamp? Also, would this be too extreme for a Focus running between 15-20psi? http://focus.c-f-m.com/index.asp?Pag...OD&ProdID=1443

**EuroAyres** · 11-29-2007, 09:19 PM

I can answer one of your questions and that is the extreemness wich its not. Your prolly thinking along the lines of wastegate mm and those sizes. BOVs have a diffrent theory

**IslandFocus** · 11-30-2007, 05:10 AM

So the 50mm Tial will work fine in my application then? I was looking at the Tial and the Greddy Type RS. The reason why I asked about the Tial being too extreme is because I saw a video on youtube where the Tial caused some surging at low boost levels. It seemed to work fine at bout 20psi though. http://www.youtube.com/watch?v=tXqgTtHECnk

**EuroAyres** · 11-30-2007, 08:38 PM

Who is tuning your car? I belieave the TiaL is adjustable as far as tuning goes. Also that could be a lot of things not just the BOV that chach prolly has something else wrong with his car. Im not 100% we will see what William can add. I do know that there are a lot of people who reguard the Tial as the best.

**IslandFocus** · 11-30-2007, 09:10 PM

I have also heard good things about Tial products. However, I haven't seen any turbocharged Foci running them yet. I've narrowed it down to either the Tial 50mm or the Greddy Type RS 40mm. I haven't made a decision on who will be tuning it yet.

**pure** · 12-01-2007, 01:13 PM

Tial makes excellent products , you choose what type of spring to run based on what your engine produces for vacuum. For example (off the top of my head) 14in/hg - 17in/hg use a 9PSI spring. The surge your hearing from the Subaru is the due to the fact the spring is too much/tight. You may get some surge at a very low load but should be nothing like that video. BOV must be set correctly for it to work right. Also I'd be careful with the Greddy RS I know a few guys running them with no problems and others running them and they leak. I for example am running the Type S little different then the RS but not much and have had some problems with it .. I will be changing to the Tial soon. Hope this helps!

**IslandFocus** · 12-01-2007, 01:35 PM

Thanks for your input! Very helpful!

**IslandFocus** · 12-01-2007, 02:04 PM

CFM, do you have the Tial 50mm BOV in blue? Also, this does come with a mounting flange correct?

**boostedzx3** · 12-02-2007, 09:32 PM

I've been running the TIAL 50mm BOV setup at 8psi for probably close to 3 years now. I have yet to have a problem with it, it works great.

**IslandFocus** · 12-03-2007, 06:18 AM

Thanks! That's the kind of feedback I was looking for. What spring did you use?

**boostedzx3** · 12-04-2007, 04:24 PM

I forget by now I think the pink one.

11-29-2007, 08:56 PM	#1
IslandFocus Senior TEAM Member Join Date: Oct 2004 Location: Nassau, Bahamas Posts: 2,118	Tial 50mm BOV Does this BOV come with the mounting flange and clamp? Also, would this be too extreme for a Focus running between 15-20psi? http://focus.c-f-m.com/index.asp?Pag...OD&ProdID=1443 __________________ 2000 Focus ZX3: Xios Turbo Kit on Built Motor in Progress!!

11-29-2007, 09:19 PM	#2
EuroAyres Senior TEAM Member Join Date: Nov 2006 Location: Metro Detroit Posts: 1,288	Re: Tial 50mm BOV I can answer one of your questions and that is the extreemness wich its not. Your prolly thinking along the lines of wastegate mm and those sizes. BOVs have a diffrent theory __________________ 03 Comp Orange SVTF

11-30-2007, 05:10 AM	#3
IslandFocus Senior TEAM Member Join Date: Oct 2004 Location: Nassau, Bahamas Posts: 2,118	Re: Tial 50mm BOV So the 50mm Tial will work fine in my application then? I was looking at the Tial and the Greddy Type RS. The reason why I asked about the Tial being too extreme is because I saw a video on youtube where the Tial caused some surging at low boost levels. It seemed to work fine at bout 20psi though. http://www.youtube.com/watch?v=tXqgTtHECnk __________________ 2000 Focus ZX3: Xios Turbo Kit on Built Motor in Progress!!

11-30-2007, 08:38 PM	#4
EuroAyres Senior TEAM Member Join Date: Nov 2006 Location: Metro Detroit Posts: 1,288	Re: Tial 50mm BOV Who is tuning your car? I belieave the TiaL is adjustable as far as tuning goes. Also that could be a lot of things not just the BOV that chach prolly has something else wrong with his car. Im not 100% we will see what William can add. I do know that there are a lot of people who reguard the Tial as the best. __________________ 03 Comp Orange SVTF

11-30-2007, 09:10 PM	#5
IslandFocus Senior TEAM Member Join Date: Oct 2004 Location: Nassau, Bahamas Posts: 2,118	Re: Tial 50mm BOV I have also heard good things about Tial products. However, I haven't seen any turbocharged Foci running them yet. I've narrowed it down to either the Tial 50mm or the Greddy Type RS 40mm. I haven't made a decision on who will be tuning it yet. __________________ 2000 Focus ZX3: Xios Turbo Kit on Built Motor in Progress!!

12-01-2007, 01:13 PM	#6
pure Junior Member Join Date: Aug 2006 Location: Orlando, FL Posts: 55	Re: Tial 50mm BOV Tial makes excellent products , you choose what type of spring to run based on what your engine produces for vacuum. For example (off the top of my head) 14in/hg - 17in/hg use a 9PSI spring. The surge your hearing from the Subaru is the due to the fact the spring is too much/tight. You may get some surge at a very low load but should be nothing like that video. BOV must be set correctly for it to work right. Also I'd be careful with the Greddy RS I know a few guys running them with no problems and others running them and they leak. I for example am running the Type S little different then the RS but not much and have had some problems with it .. I will be changing to the Tial soon. Hope this helps!

12-01-2007, 01:35 PM	#7
IslandFocus Senior TEAM Member Join Date: Oct 2004 Location: Nassau, Bahamas Posts: 2,118	Re: Tial 50mm BOV Thanks for your input! Very helpful! __________________ 2000 Focus ZX3: Xios Turbo Kit on Built Motor in Progress!!

12-01-2007, 02:04 PM	#8
IslandFocus Senior TEAM Member Join Date: Oct 2004 Location: Nassau, Bahamas Posts: 2,118	Re: Tial 50mm BOV CFM, do you have the Tial 50mm BOV in blue? Also, this does come with a mounting flange correct? __________________ 2000 Focus ZX3: Xios Turbo Kit on Built Motor in Progress!! Last edited by IslandFocus : 12-02-2007 at 09:55 AM.

12-02-2007, 09:32 PM	#9
boostedzx3 Senior TEAM Member Join Date: Aug 2004 Location: Enola, PA Posts: 4,162	Re: Tial 50mm BOV I've been running the TIAL 50mm BOV setup at 8psi for probably close to 3 years now. I have yet to have a problem with it, it works great. __________________ Project s10 daily driver---is done thanks for the feedback! http://forums.focaljet.com/team-rigz...storation.html Project 351 swap in teh mustang--updated 6/15- 351 is in and done http://forums.focaljet.com/team-rigz...ml#post6540928

12-03-2007, 06:18 AM	#10
IslandFocus Senior TEAM Member Join Date: Oct 2004 Location: Nassau, Bahamas Posts: 2,118	Re: Tial 50mm BOV Thanks! That's the kind of feedback I was looking for. What spring did you use? __________________ 2000 Focus ZX3: Xios Turbo Kit on Built Motor in Progress!!

12-04-2007, 04:24 PM	#11
boostedzx3 Senior TEAM Member Join Date: Aug 2004 Location: Enola, PA Posts: 4,162	Re: Tial 50mm BOV I forget by now I think the pink one. __________________ Project s10 daily driver---is done thanks for the feedback! http://forums.focaljet.com/team-rigz...storation.html Project 351 swap in teh mustang--updated 6/15- 351 is in and done http://forums.focaljet.com/team-rigz...ml#post6540928

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode