CFM Ported Head Packages - Stage 2 available - Page 4 - The Ford Focus Forum

**geostef** · 05-31-2006, 11:39 AM

No kidding...I wish my mechanist were asking me how to charge when it comes the time...he just sits and whets his blades

Once again well done CFM!

**Smoe** · 05-31-2006, 01:41 PM

i'll give you 50 plus shipping and a 10 dollar core

**Seawolf** · 05-31-2006, 02:10 PM

Under $1000 if possible, since FR heads with all of those features are near $900. $1100 max though.

**BlkThunder** · 05-31-2006, 02:19 PM

Quote:

Originally Posted by Seawolf

Under $1000 if possible, since FR heads with all of those features are near $900. $1100 max though.

i concur... now get on those svt heads!!!

**sleeperlove** · 05-31-2006, 03:45 PM

Quote:

Originally Posted by Seawolf

Under $1000 if possible, since FR heads with all of those features are near $900. $1100 max though.

FR head is 1100 now ans the fr head beats it.

I would say if you price it with the FR head or a bit below it will sell pretty well

**CFM Focus** · 05-31-2006, 06:03 PM

Quote:

Originally Posted by sleeperlove

FR head is 1100 now ans the fr head beats it.

Our new Stage 2 outflows the FR head all over and that is the one I'm asking about. Our head outflows the FR head and has a better valve job. Why should that sell for less?

**CFM Focus** · 05-31-2006, 06:05 PM

Quote:

Originally Posted by Seawolf

Under $1000 if possible, since FR heads with all of those features are near $900. $1100 max though.

I'd like to know where they sell for near $900...

**REDFOCZ** · 05-31-2006, 06:30 PM

Quote:

Originally Posted by CFM Focus

I'd like to know where they sell for near $900...

Is this just for the head

**CFM Focus** · 05-31-2006, 07:27 PM

Quote:

Originally Posted by REDFOCZ

Is this just for the head

What do you mean?

**REDFOCZ** · 05-31-2006, 08:56 PM

Is it just the worked head with the porting and upgraded valve springs, or a package deal with cams and cam gears?

**CFM Focus** · 05-31-2006, 09:06 PM

We will sell it either way but you will save some cash if you buy everything. Not sure why you quoted that particular sentence. I hope you noticed that is not a price quote for our head.

**REDFOCZ** · 05-31-2006, 09:23 PM

Yeah I re read it sorry. I missed understood it

**sleeperlove** · 05-31-2006, 11:18 PM

Quote:

Originally Posted by CFM Focus

Our new Stage 2 outflows the FR head all over and that is the one I'm asking about. Our head outflows the FR head and has a better valve job. Why should that sell for less?

I meant to write that the CFM outflows the FR head not that the FR head outflows the FR head.

I just think that if it is priced with the FR head even though it is better that it will sell well. Its not my company thats just my opinion. If you price it near what the FS/Cosworth head is i think people would buy the FS head because of the name that is on it.

I am very confident that the CFM package is going to be spectacular but I think where it is priced is critical.

The Package deal with everything will be interesting to see!

**sc0tty8** · 06-01-2006, 07:46 AM

FR head comes with better springs...give it a valve job and it would prob be just as good as a ported stock head.

**CFM Focus** · 06-01-2006, 10:45 AM

Quote:

Originally Posted by sc0tty8

FR head comes with better springs...give it a valve job and it would prob be just as good as a ported stock head.

Better springs than which head?

**CFM Focus** · 06-01-2006, 10:47 AM

Who is in the market for a cylinder head within the next 2-4 weeks?

**sc0tty8** · 06-01-2006, 11:50 AM

Quote:

Originally Posted by CFM Focus

Better springs than which head?

Your using OEM goodies in the stage 1/2 heads, correct? The first page doesn't say differant...

The ford racing piece has larger valves and upgraded springs, the ported head may flow more, but, with some work, the FRPP would prob conquer it?

Quote:

Originally Posted by CFM Focus

Who is in the market for a cylinder head within the next 2-4 weeks?

Possibly me....whats the price looking like?

**CFM Focus** · 06-01-2006, 02:21 PM

Quote:

Originally Posted by sc0tty8

Your using OEM goodies in the stage 1/2 heads, correct? The first page doesn't say differant...

The ford racing piece has larger valves and upgraded springs, the ported head may flow more, but, with some work, the FRPP would prob conquer it?

Possibly me....whats the price looking like?

Ok, I understand. The original Stage 2 numbers will be replaced with the NEW Stage 2 numbers I posted a couple of days ago. The Stage 2 package will now include similar or better springs/retainers and larger valves like the FR head.

We are also going to offer a Stage 3 but that will be a fully ported race head which will not be suitable for most street applications and will have a higher price tag. By the time you have an FR head ported and a valve job you will pay more.

**sc0tty8** · 06-01-2006, 03:57 PM

Quote:

Originally Posted by CFM Focus

Ok, I understand. The original Stage 2 numbers will be replaced with the NEW Stage 2 numbers I posted a couple of days ago. The Stage 2 package will now include similar or better springs/retainers and larger valves like the FR head.

We are also going to offer a Stage 3 but that will be a fully ported race head which will not be suitable for most street applications and will have a higher price tag. By the time you have an FR head ported and a valve job you will pay more.

But with a FR head, you got more meat to work with

Any dyno numbers on the heads yet?

**sleeperlove** · 06-01-2006, 05:13 PM

I may be in the market. I am considering getting some extra money on my school loans for some car stuff and this could be at or near the top of the list.

PM sent

**CFM Focus** · 06-01-2006, 06:00 PM

Quote:

Originally Posted by sc0tty8

But with a FR head, you got more meat to work with

Any dyno numbers on the heads yet?

How did you verify that the FR head has more meat? I read that in a few posts but have yet to verify that. I really doubt that Ford Racing had Ford cast them a Zetec head. They would have done a Mustang head 100 times before considering doing a Zetec head.

We are going to build a NA car to be able to provide reliable dyno numbers for our customers. It will be a month or two before the car is ready.

**sleeperlove** · 06-01-2006, 06:39 PM

Is your head Milled at all?

What kind of compression would we be looking at?

**CFM Focus** · 06-01-2006, 08:08 PM

It can be milled for an additional charge.

**sleeperlove** · 06-01-2006, 08:19 PM

so stage one now is Just the port/ polish/ valve job correct?

Then stage 2 will be big valves and better springs and have options for cams and buckets installed as well?

**Focused** · 06-02-2006, 12:17 AM

Quote:

Originally Posted by CFM Focus

Who is in the market for a cylinder head within the next 2-4 weeks?

PMs are full. Have one to send. Thanks!

05-31-2006, 11:39 AM	#76 (permalink)
geostef TEAM Member Join Date: May 2006 Location: Athens Posts: 478	Re: CFM Ported Head Packages Coming VERY SOON! No kidding...I wish my mechanist were asking me how to charge when it comes the time...he just sits and whets his blades Once again well done CFM! __________________ PowerWorks 2044cc Zetec -CR 9.7:1, Diamond pistons with Eagle rods ,lightened - weightbalanced crankshaft, 2.4'' pulley, 5.36''crank pulley, FR head with 1mm Supertech inconel valves,ported and polished supercharger manifold, Mcnews custom SC cams, SVT manifold decat with 2.75'' custom pipes with custom middle box,MTX trans 4.06 final with HyperSingle Exedy and Torsen T2 *-- from JJ POWER* --**

05-31-2006, 02:10 PM	#78 (permalink)
Seawolf TEAM Member Join Date: Dec 2001 Location: in the Chi-Town area Posts: 849	Re: CFM Ported Head Packages Coming VERY SOON! Under $1000 if possible, since FR heads with all of those features are near $900. $1100 max though.

05-31-2006, 08:56 PM	#85 (permalink)
REDFOCZ Senior TEAM Member Join Date: May 2004 Location: Orlando, FL Posts: 1,109	Re: CFM Ported Head Packages Coming VERY SOON! Is it just the worked head with the porting and upgraded valve springs, or a package deal with cams and cam gears? __________________ 2008 Ford Ranger Sport 2WD Four inch Lift saving up for some 33's

05-31-2006, 09:06 PM	#86 (permalink)
CFM Focus Premier Sponsor Join Date: Jun 2002 Location: www.c-f-m.com Posts: 1,579	Re: CFM Ported Head Packages Coming VERY SOON! We will sell it either way but you will save some cash if you buy everything. Not sure why you quoted that particular sentence. I hope you noticed that is not a price quote for our head. __________________ Central Florida Motorsports, Inc. - Est 1996 sales@c-f-m.com / Live Chat / 407.339.9211 / Subscribe to CFM Forum

05-31-2006, 09:23 PM	#87 (permalink)
REDFOCZ Senior TEAM Member Join Date: May 2004 Location: Orlando, FL Posts: 1,109	Re: CFM Ported Head Packages Coming VERY SOON! Yeah I re read it sorry. I missed understood it __________________ 2008 Ford Ranger Sport 2WD Four inch Lift saving up for some 33's

06-01-2006, 07:46 AM	#89 (permalink)
sc0tty8 Senior TEAM Member Join Date: Aug 2005 Location: Litchfield MN 55355 Posts: 1,353	Re: CFM Ported Head Packages Coming VERY SOON! FR head comes with better springs...give it a valve job and it would prob be just as good as a ported stock head. __________________ TOTALED2003 Pitch Black Slocus-First and, so far, the only focus in MN with the SVT DSI manifold on a non-svt car. FS 4-1 header, Magnaflow catback w/ resonator, Crane 0012 cams, SVT DSI, custom air intake, VF solid poly mounts, the rest, doesn't add to the 'go' factor, therefore, not important.

06-01-2006, 10:47 AM	#91 (permalink)
CFM Focus Premier Sponsor Join Date: Jun 2002 Location: www.c-f-m.com Posts: 1,579	Re: CFM Ported Head Packages Coming VERY SOON! Who is in the market for a cylinder head within the next 2-4 weeks? __________________ Central Florida Motorsports, Inc. - Est 1996 sales@c-f-m.com / Live Chat / 407.339.9211 / Subscribe to CFM Forum

06-01-2006, 05:13 PM	#95 (permalink)
sleeperlove You wouldn't like me when I'm angry. Join Date: Aug 2004 Location: Apex hunting Posts: 9,824	Re: CFM Ported Head Packages Coming VERY SOON! I may be in the market. I am considering getting some extra money on my school loans for some car stuff and this could be at or near the top of the list. PM sent __________________ “Empty your mind, be formless, shapeless - like water. Now you put water into a cup, it becomes the cup, you put water into a bottle, it becomes the bottle, you put it in a teapot, it becomes the teapot. Now water can flow or it can crash. Be water, my friend.” - Bruce Lee Last edited by sleeperlove; 06-01-2006 at 05:56 PM.

06-01-2006, 06:39 PM	#97 (permalink)
sleeperlove You wouldn't like me when I'm angry. Join Date: Aug 2004 Location: Apex hunting Posts: 9,824	Re: CFM Ported Head Packages Coming VERY SOON! Is your head Milled at all? What kind of compression would we be looking at? __________________ “Empty your mind, be formless, shapeless - like water. Now you put water into a cup, it becomes the cup, you put water into a bottle, it becomes the bottle, you put it in a teapot, it becomes the teapot. Now water can flow or it can crash. Be water, my friend.” - Bruce Lee

06-01-2006, 08:08 PM	#98 (permalink)
CFM Focus Premier Sponsor Join Date: Jun 2002 Location: www.c-f-m.com Posts: 1,579	Re: CFM Ported Head Packages Coming VERY SOON! It can be milled for an additional charge. __________________ Central Florida Motorsports, Inc. - Est 1996 sales@c-f-m.com / Live Chat / 407.339.9211 / Subscribe to CFM Forum

06-01-2006, 08:19 PM	#99 (permalink)
sleeperlove You wouldn't like me when I'm angry. Join Date: Aug 2004 Location: Apex hunting Posts: 9,824	Re: CFM Ported Head Packages Coming VERY SOON! so stage one now is Just the port/ polish/ valve job correct? Then stage 2 will be big valves and better springs and have options for cams and buckets installed as well? __________________ “Empty your mind, be formless, shapeless - like water. Now you put water into a cup, it becomes the cup, you put water into a bottle, it becomes the bottle, you put it in a teapot, it becomes the teapot. Now water can flow or it can crash. Be water, my friend.” - Bruce Lee

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode