PRODUCT FAQ: SVT 65mm Throttle Body - Page 2 - Focaljet

**CaysE** · 09-20-2006, 09:49 PM

I'm a little confused about the transition hose... you have two different kinds available on your site, but both say they are for use with an aftermarket intake and 65mm TB.

http://focus.c-f-m.com/index.asp?Pag...OD&ProdID=1119
http://focus.c-f-m.com/index.asp?Pag...OD&ProdID=1118

Which one would be for an AEM CAI, and what's the other one for?

**cfmfocus2** · 09-21-2006, 01:54 PM

The right way would be to use the transition hose, but those are on back order.

The other way is doing the 3 inch silicone hose, which would require using the existing aem hose. You would put the 3 inch hose over the throttle body. The other end of the 3 inch hose would go over the aem silicone hose. You would want to push the aem silicone hose, so it is flush with the aem intake. That way it would increase the size to 3 inch. That is no the best way to do it, but that is the way steeda does it. You may be able to find a transition hose else where.

**CaysE** · 09-21-2006, 02:03 PM

OK, so the 3" to 2.75" hose is what I would think would be best. Thanks for the info.

**cfmfocus2** · 09-21-2006, 02:12 PM

Quote:

Originally Posted by CaysE

OK, so the 3" to 2.75" hose is what I would think would be best. Thanks for the info.

The aem intake is 2.75 and the TB is 3.12. The 3'' to 2.75'' is the closes thing companies offer. It is a tight fit on the TB end, but it works.

09-20-2006, 09:49 PM	#26
CaysE EDM Specialist Join Date: Dec 2004 Location: Bloomfield, NJ Posts: 7,067	Re: PRODUCT FAQ: SVT 65mm Throttle Body I'm a little confused about the transition hose... you have two different kinds available on your site, but both say they are for use with an aftermarket intake and 65mm TB. http://focus.c-f-m.com/index.asp?Pag...OD&ProdID=1119 http://focus.c-f-m.com/index.asp?Pag...OD&ProdID=1118 Which one would be for an AEM CAI, and what's the other one for? __________________ 2008 Cannondale F4 ··· Hi-brite · no mods (yet) 2003 Vermilion Red SVTf ··· hehehehehehe strictly/focused "It would take a miracle to make the entire Focus community get along. FF vs FJ, F-P vs FS, tuner vs tuner, racer vs ricer. What can you do?"

09-21-2006, 01:54 PM	#27
cfmfocus2 Premier Sponsor Join Date: Nov 2004 Posts: 847	Re: PRODUCT FAQ: SVT 65mm Throttle Body The right way would be to use the transition hose, but those are on back order. The other way is doing the 3 inch silicone hose, which would require using the existing aem hose. You would put the 3 inch hose over the throttle body. The other end of the 3 inch hose would go over the aem silicone hose. You would want to push the aem silicone hose, so it is flush with the aem intake. That way it would increase the size to 3 inch. That is no the best way to do it, but that is the way steeda does it. You may be able to find a transition hose else where. __________________ William - Sales Dept / Central Florida Motorsports, Inc. - Since 1996 william@c-f-m.com / Online Customer Service / 407.339.9211 We match ALL advertised prices on products we carry! Our Latest Products / SVT Focus Parts Video of our 12 second Vortech Supercharged 1/4 mile Focus / Engine Specs Come see our new show room!

09-21-2006, 02:03 PM	#28
CaysE EDM Specialist Join Date: Dec 2004 Location: Bloomfield, NJ Posts: 7,067	Re: PRODUCT FAQ: SVT 65mm Throttle Body OK, so the 3" to 2.75" hose is what I would think would be best. Thanks for the info. __________________ 2008 Cannondale F4 ··· Hi-brite · no mods (yet) 2003 Vermilion Red SVTf ··· hehehehehehe strictly/focused "It would take a miracle to make the entire Focus community get along. FF vs FJ, F-P vs FS, tuner vs tuner, racer vs ricer. What can you do?" Last edited by cfmfocus2 : 09-21-2006 at 02:11 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode