PRODUCT FAQ: Custom Zetec Shortblocks - The Ford Focus Forum

**CFM Focus** · 04-20-2006, 09:26 PM

Here you will find all information relevant to this product. Please only post questions or information that will be useful to others who own or are considering purchasing this product. Thanks!

**CFM Focus** · 04-20-2006, 09:45 PM

We have 4 shortblocks being built this week. They are being built with Eagle rods and FC/Probe pistons. We offer a main bolt upgrade to ARP main studs. Installing ARP main studs will require the lower crankcase cover to be modified. We offer this modification for an additional $75.

All shortblocks ARE NOT CREATED EQUAL!

CFM shortblocks are manufactured from BRAND NEW components. No boring this, no resized that. EVERYTHING is brand new! Building an engine properly is not as easy as most people think. It requires special tools, knowledge and experience. It is the difference between premature component failure or damage and not having ANY problems. Our engines are built by a dedicated engine builder with in-house equipment and tools. From beginning to end, your engine will be handled, built and inspected by the same person.

Introductory pricing on our shortblocks is $2,299.95 which includes shipping. Add an additional $134.95 for main stud upgrade. Regular price will be $2,499.95. Our goal is to have shortblocks ready to ship so you don't have to wait the typical 2-4 months while the engine is built.

**Reza** · 04-20-2006, 10:19 PM

do you have any of these with SVT Block?

**gobstopper** · 04-20-2006, 10:36 PM

Is there any provision for oil squirters? Any provision for a revised CR (i.e. 9:1 rather than 8.2:1 or 10.2:1)?

My checkbook is throbbing with anticipation.

**CFM Focus** · 04-20-2006, 10:36 PM

Quote:

Originally Posted by focus_wrc

do you have any of these with SVT Block?

We only have NEW standard Zetec blocks. If you can supply a NEW SVT or CGI block we'll be more than glad to have one built for you.

**CFM Focus** · 04-20-2006, 10:39 PM

Quote:

Originally Posted by gobstopper

Is there any provision for oil squirters? Any provision for a revised CR (i.e. 9:1 rather than 8.2:1 or 10.2:1)?

My checkbook is throbbing with anticipation.

We are running low on the 8.2 pistons and will be ordering new pistons soon. I think we're going to order something closer to 9:1 since that will suit the majority of customers. You could also go with 10.2 and run a thicker head gasket if you're goal is around 300whp. Depends on how much power you're going for. Anything over 350+ I would recommend going somewhere in the 8.5:1 range for the added safety. Especially if you're going to try and push limits on 93 octane.

**gobstopper** · 04-21-2006, 03:49 PM

Quote:

Originally Posted by CFM Focus

We are running low on the 8.2 pistons and will be ordering new pistons soon. I think we're going to order something closer to 9:1 since that will suit the majority of customers. You could also go with 10.2 and run a thicker head gasket if you're goal is around 300whp. Depends on how much power you're going for. Anything over 350+ I would recommend going somewhere in the 8.5:1 range for the added safety. Especially if you're going to try and push limits on 93 octane.

I'm looking to make about 220-240 hp all told, so I'd think that even on 93 octane a 9:1 CR would be good to go.

If you can get some 9:1 CR pistons (JE?), you can consider a shortblock sold right now. Let me know.

**CFM Focus** · 04-21-2006, 05:17 PM

Sounds good! We're trying to source some JE pistons. Will get back to you.

**gobstopper** · 04-21-2006, 05:45 PM

CFM Focus, you have a PM.

**orangeZXT** · 04-21-2006, 08:52 PM

gob u need to come get a ride in the orange slowcus and u will see 220 isnt all u need

for real come up some time

**gobstopper** · 04-25-2006, 11:00 PM

Quote:

Originally Posted by gobstopper

CFM Focus, you have a PM.

Ahem...

Perhaps you could reply?

**venomrogue** · 06-10-2006, 11:34 PM

Last I checked, JE 9:1 compression pistons were on back order. I got the last set that JE had in stock. But that was a month ago, so I dunno if more have been built.

**CFM Focus** · 06-27-2006, 08:42 PM

We have them in stock and ready to ship!

**f22fzx3** · 06-27-2006, 09:07 PM

Oil squirters?

**CFM Focus** · 06-27-2006, 09:28 PM

These are not SVT blocks so no oil squirters are available. In our opinion, they are not as essential when you lower the compression ratio. Also not worth paying for the additional cost for them.

**Reza** · 06-28-2006, 12:04 PM

how much are they agian? any link?

**CFM Focus** · 06-28-2006, 12:06 PM

Quote:

Originally Posted by focus_wrc

how much are they agian? any link?

Pricing is on the second post in this thread. They will be added to our online store shortly.

**Reza** · 06-28-2006, 12:20 PM

cool.

do you guys do custom setup also? can you get CGI block and cosworth rods? if not how about if we provide the block and rod ?

thanks

**CFM Focus** · 06-28-2006, 02:05 PM

Quote:

Originally Posted by focus_wrc

cool.

do you guys do custom setup also? can you get CGI block and cosworth rods? if not how about if we provide the block and rod ?

thanks

We can do that too. We can get the parts for you so you don't end up paying additional shipping costs.

**Reza** · 06-28-2006, 02:11 PM

Quote:

Originally Posted by CFM Focus

We can do that too. We can get the parts for you so you don't end up paying additional shipping costs.

Cool thats always nice i pm you what i want.

**IslandFocus** · 12-08-2006, 04:02 PM

Does this shortblock include the crank assembly?

**cfmfocus2** · 12-08-2006, 05:13 PM

Yes.

04-20-2006, 09:26 PM	#1 (permalink)
CFM Focus Premier Sponsor Join Date: Jun 2002 Location: www.c-f-m.com Posts: 1,579	PRODUCT FAQ: Custom Zetec Shortblocks Here you will find all information relevant to this product. Please only post questions or information that will be useful to others who own or are considering purchasing this product. Thanks! __________________ Central Florida Motorsports, Inc. - Est 1996 sales@c-f-m.com / Live Chat / 407.339.9211 / Subscribe to CFM Forum Last edited by CFM Focus; 04-21-2006 at 05:31 PM.

04-20-2006, 09:45 PM	#2 (permalink)
CFM Focus Premier Sponsor Join Date: Jun 2002 Location: www.c-f-m.com Posts: 1,579	Re: PRODUCT FAQ: Custom Zetec Shortblocks We have 4 shortblocks being built this week. They are being built with Eagle rods and FC/Probe pistons. We offer a main bolt upgrade to ARP main studs. Installing ARP main studs will require the lower crankcase cover to be modified. We offer this modification for an additional $75. All shortblocks ARE NOT CREATED EQUAL! CFM shortblocks are manufactured from BRAND NEW components. No boring this, no resized that. EVERYTHING is brand new! Building an engine properly is not as easy as most people think. It requires special tools, knowledge and experience. It is the difference between premature component failure or damage and not having ANY problems. Our engines are built by a dedicated engine builder with in-house equipment and tools. From beginning to end, your engine will be handled, built and inspected by the same person. Introductory pricing on our shortblocks is $2,299.95 which includes shipping. Add an additional $134.95 for main stud upgrade. Regular price will be $2,499.95. Our goal is to have shortblocks ready to ship so you don't have to wait the typical 2-4 months while the engine is built. __________________ Central Florida Motorsports, Inc. - Est 1996 sales@c-f-m.com / Live Chat / 407.339.9211 / Subscribe to CFM Forum Last edited by CFM Focus; 06-27-2006 at 08:35 PM.

04-20-2006, 10:19 PM	#3 (permalink)
Reza Formerly focus_wrc Join Date: Aug 2004 Location: Los Angeles Posts: 8,680	Re: PRODUCT FAQ: Custom Zetec Shortblocks do you have any of these with SVT Block? __________________ H&R/// , Team Dynamics , FocusSport , TCE Brakes, Bridgestone.

04-20-2006, 10:36 PM	#4 (permalink)
gobstopper Senior TEAM Member Join Date: Jul 2002 Location: St. Petersburg, FL Posts: 2,013	Re: PRODUCT FAQ: Custom Zetec Shortblocks Is there any provision for oil squirters? Any provision for a revised CR (i.e. 9:1 rather than 8.2:1 or 10.2:1)? My checkbook is throbbing with anticipation.

04-21-2006, 05:17 PM	#8 (permalink)
CFM Focus Premier Sponsor Join Date: Jun 2002 Location: www.c-f-m.com Posts: 1,579	Re: PRODUCT FAQ: Custom Zetec Shortblocks Sounds good! We're trying to source some JE pistons. Will get back to you. __________________ Central Florida Motorsports, Inc. - Est 1996 sales@c-f-m.com / Live Chat / 407.339.9211 / Subscribe to CFM Forum

04-21-2006, 05:45 PM	#9 (permalink)
gobstopper Senior TEAM Member Join Date: Jul 2002 Location: St. Petersburg, FL Posts: 2,013	Re: PRODUCT FAQ: Custom Zetec Shortblocks CFM Focus, you have a PM.

04-21-2006, 08:52 PM	#10 (permalink)
orangeZXT Moderator Join Date: Feb 2003 Location: for sale forum Posts: 8,679	Re: PRODUCT FAQ: Custom Zetec Shortblocks gob u need to come get a ride in the orange slowcus and u will see 220 isnt all u need for real come up some time __________________ [FJ] check out my new project hit ALT + F4 to view the pics -There is a fine line between "HOBBY" and MENTAL ILLNESS"- [FJ] "more psi than your tires"[FJ]

06-10-2006, 11:34 PM	#12 (permalink)
venomrogue Senior TEAM Member Join Date: Jun 2002 Location: Dallas, TX Posts: 3,275	Re: PRODUCT FAQ: Custom Zetec Shortblocks Last I checked, JE 9:1 compression pistons were on back order. I got the last set that JE had in stock. But that was a month ago, so I dunno if more have been built. __________________ Old and Busted: 2002 Fully built Powerworks ZX3 New Hotness: 2004 Comp Orange JRSC SVT As well as TWO 2002 Red SVT's Parts by Karl @ Massive Speed System (www.massivespeedsystem.com) Tuning and porting by Mark @ Skidmark Racing (turbof150.com)

06-27-2006, 08:42 PM	#13 (permalink)
CFM Focus Premier Sponsor Join Date: Jun 2002 Location: www.c-f-m.com Posts: 1,579	Re: PRODUCT FAQ: Custom Zetec Shortblocks We have them in stock and ready to ship! __________________ Central Florida Motorsports, Inc. - Est 1996 sales@c-f-m.com / Live Chat / 407.339.9211 / Subscribe to CFM Forum

06-27-2006, 09:07 PM	#14 (permalink)
f22fzx3 Junior Member Join Date: Jun 2006 Posts: 96	Re: PRODUCT FAQ: Custom Zetec Shortblocks Oil squirters?

06-27-2006, 09:28 PM	#15 (permalink)
CFM Focus Premier Sponsor Join Date: Jun 2002 Location: www.c-f-m.com Posts: 1,579	Re: PRODUCT FAQ: Custom Zetec Shortblocks These are not SVT blocks so no oil squirters are available. In our opinion, they are not as essential when you lower the compression ratio. Also not worth paying for the additional cost for them. __________________ Central Florida Motorsports, Inc. - Est 1996 sales@c-f-m.com / Live Chat / 407.339.9211 / Subscribe to CFM Forum

06-28-2006, 12:04 PM	#16 (permalink)
Reza Formerly focus_wrc Join Date: Aug 2004 Location: Los Angeles Posts: 8,680	Re: PRODUCT FAQ: Custom Zetec Shortblocks how much are they agian? any link?

06-28-2006, 12:20 PM	#18 (permalink)
Reza Formerly focus_wrc Join Date: Aug 2004 Location: Los Angeles Posts: 8,680	Re: PRODUCT FAQ: Custom Zetec Shortblocks cool. do you guys do custom setup also? can you get CGI block and cosworth rods? if not how about if we provide the block and rod ? thanks

12-08-2006, 04:02 PM	#21 (permalink)
IslandFocus Senior TEAM Member Join Date: Oct 2004 Location: Nassau, Bahamas Posts: 2,702	Re: PRODUCT FAQ: Custom Zetec Shortblocks Does this shortblock include the crank assembly? __________________ 2000 Focus ZX3: Xios Turbo Kit on Built Motor in Progress!!

12-08-2006, 05:13 PM	#22 (permalink)
cfmfocus2 Premier Sponsor Join Date: Nov 2004 Posts: 1,218	Re: PRODUCT FAQ: Custom Zetec Shortblocks Yes. __________________ William - Sales Dept / Central Florida Motorsports, Inc. - Est 1996 william@c-f-m.com / Live Chat / 407.339.9211 / Subscribe to CFM Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode