Oil Pump with billet oil pump gears - Page 2 - The Ford Focus Forum

**COSVT03** · 06-08-2007, 07:59 PM

COSTV03
Hopefully thats a built engine your reving that high with because if it hasn't broken yet fatigue damage is setting in and it's just a waiting game. Even yet , like William said you would need to dyno it because I'll bet the power band dropped way before then and it's a waste of time and risk. Good luck with it though[/QUOTE]

Im sure that Fatigue has set in and i'm just waiting on money to rebuild my engine. BUT I do have a set of VERY HOT cams with a head to match it that breathes VERY well at anything over .210 valve lift. Soooo...YES my car does make more power and NO the powerband has not dropped off and doesn't until about 92~9300 ish.
P.S. The valves have given out much quicker than the motor...
Also yes I have this oil pump. Its rock solid.

**IslandFocus** · 06-10-2007, 12:39 PM

So no word on when the billet gears will be available yet?

**Hector@CFM** · 06-12-2007, 11:52 PM

Quote:

Originally Posted by IslandFocus

So no word on when the billet gears will be available yet?

Should be available in about two weeks.

**IslandFocus** · 06-13-2007, 04:36 PM

Coolio! BTW, do you sell just the gears by itself?

**Hector@CFM** · 06-14-2007, 02:46 PM

They are sold with the pump because it is not recommended that you install them on a used oil pump.

**Egz** · 06-21-2007, 07:19 AM

Ever think of an upgraded oil pump for the Duratec? I'd love to have some sense of mind if I decided to push my engine past 7500.

**IslandFocus** · 06-21-2007, 08:14 PM

Does it make sense putting these in if I only plan to go to around 7,400-7,500rpm?

**William@CFM** · 06-22-2007, 01:22 PM

We have it back in-stock.

**William@CFM** · 06-22-2007, 01:25 PM

Quote:

Originally Posted by IslandFocus

Does it make sense putting these in if I only plan to go to around 7,400-7,500rpm?

If your going to 7,500 rpms, I can see where it can be easy to accidently go a few hundred rpms about that. It would not hurt to buy one to be safe. If you don't get one, I would recommend playing it safe and shifting at 7,200 rpms.

**IslandFocus** · 06-22-2007, 02:36 PM

OK thanks!

**IslandFocus** · 09-23-2007, 09:00 AM

Finally got around to ordering a set

.......only took about 3 months

**Hector@CFM** · 09-25-2007, 06:26 PM

Quote:

Originally Posted by IslandFocus

Finally got around to ordering a set

.......only took about 3 months

Thanks for the order!

06-08-2007, 07:59 PM	#26 (permalink)
COSVT03 Senior TEAM Member Join Date: Oct 2004 Posts: 1,396	Re: Oil Pump with billet oil pump gears COSTV03 Hopefully thats a built engine your reving that high with because if it hasn't broken yet fatigue damage is setting in and it's just a waiting game. Even yet , like William said you would need to dyno it because I'll bet the power band dropped way before then and it's a waste of time and risk. Good luck with it though[/QUOTE] Im sure that Fatigue has set in and i'm just waiting on money to rebuild my engine. BUT I do have a set of VERY HOT cams with a head to match it that breathes VERY well at anything over .210 valve lift. Soooo...YES my car does make more power and NO the powerband has not dropped off and doesn't until about 92~9300 ish. P.S. The valves have given out much quicker than the motor... Also yes I have this oil pump. Its rock solid. __________________ #3052 of 3985

06-10-2007, 12:39 PM	#27 (permalink)
IslandFocus Senior TEAM Member Join Date: Oct 2004 Location: Nassau, Bahamas Posts: 2,904	Re: Oil Pump with billet oil pump gears So no word on when the billet gears will be available yet? __________________ 2000 Focus ZX3: Xios Turbo Kit on Built Motor in Progress!!

06-13-2007, 04:36 PM	#29 (permalink)
IslandFocus Senior TEAM Member Join Date: Oct 2004 Location: Nassau, Bahamas Posts: 2,904	Re: Oil Pump with billet oil pump gears Coolio! BTW, do you sell just the gears by itself? __________________ 2000 Focus ZX3: Xios Turbo Kit on Built Motor in Progress!! Last edited by IslandFocus; 06-13-2007 at 07:25 PM.

06-14-2007, 02:46 PM	#30 (permalink)
Hector@CFM Premier Sponsor Join Date: Jun 2002 Location: www.c-f-m.com Posts: 1,704	Re: Oil Pump with billet oil pump gears They are sold with the pump because it is not recommended that you install them on a used oil pump. __________________ Hector - R&D Dept / Central Florida Motorsports, Inc. - Est 1996 sales@c-f-m.com / Live Chat / 407.339.9211 / Subscribe to CFM Forum R.I.P. PampasFoci

06-21-2007, 07:19 AM	#31 (permalink)
Egz Inheritly Sinister Join Date: Nov 2000 Location: Tappahannock, VA Posts: 20,673	Re: Oil Pump with billet oil pump gears Ever think of an upgraded oil pump for the Duratec? I'd love to have some sense of mind if I decided to push my engine past 7500.

06-21-2007, 08:14 PM	#32 (permalink)
IslandFocus Senior TEAM Member Join Date: Oct 2004 Location: Nassau, Bahamas Posts: 2,904	Re: Oil Pump with billet oil pump gears Does it make sense putting these in if I only plan to go to around 7,400-7,500rpm? __________________ 2000 Focus ZX3: Xios Turbo Kit on Built Motor in Progress!!

06-22-2007, 01:22 PM	#33 (permalink)
William@CFM Premier Sponsor Join Date: Nov 2004 Posts: 1,276	Re: Oil Pump with billet oil pump gears We have it back in-stock. __________________ William - Sales Dept / Central Florida Motorsports, Inc. - Est 1996 william@c-f-m.com / Live Chat / 407.339.9211 / Subscribe to CFM Forum

06-22-2007, 02:36 PM	#35 (permalink)
IslandFocus Senior TEAM Member Join Date: Oct 2004 Location: Nassau, Bahamas Posts: 2,904	Re: Oil Pump with billet oil pump gears OK thanks! __________________ 2000 Focus ZX3: Xios Turbo Kit on Built Motor in Progress!!

09-23-2007, 09:00 AM	#36 (permalink)
IslandFocus Senior TEAM Member Join Date: Oct 2004 Location: Nassau, Bahamas Posts: 2,904	Re: Oil Pump with billet oil pump gears Finally got around to ordering a set .......only took about 3 months __________________ 2000 Focus ZX3: Xios Turbo Kit on Built Motor in Progress!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode