175fwhp CFM NA Dyno Zetec.

[cfmfocus2]

CFM will be offering a 170HP+ capable NA package soon for the 2.0L zetec. Below is a dyno of our 2001 Ford Focus zx3 on 93 octane. Everything that has been done to this car is offered on our website. We recommend purchasing an AEM cold air intake or a good short ram intake like the AEM or K&N.

Max hp is at 6,500 rpms. Dyno stopped at 7,400 rpms.

We are looking to offer our own custom intake manifold, as the 2000 intake manifold does not support enough flow after 6,500 rpms NA.





Mods:

CFM Stage 2 cylinder head milled .040 to give about 10.5:1 compression
CFM cam gears
Comp cams stage 3
2000 intake manifold
CFM High performance oil pump - recommend when going over 7,200 rpms.
CFM Underdrive pulleys
CFM 65MM Throttle body
CFM protoype short ram intake
SVT exhaust conversion kit with CFM SVT off road pipe, Ford racing svt header, and Magnaflow exhaust for svt.
30lb injectors
CFM Custom tuning with SCT Xcal2.

[Reza]

you guys need your new oil pump so you could rev it more.

[CFM Focus]

It already has one. We're working on an intake manifold that can handle the flow of the cylinder head and more aggressive camshafts to match.

[Reza]

Cool how does the car dirve on street??

[jerkeesvt]

Very impressive!!! Just goes to show......there are some really GREAT companies still producing good parts and services for our Zetec engines. CFM is "a"(not "the") leader in Focus performance. Well done to CFM!!! Keep up the good work!!!!

[IslandFocus]

That's pretty incredible with a stock intake manifold!

[REDFOCZ]

Very nice, is there a dyno video of this car? I bet it sounds mean at 7000+ RPM's

[CFM Focus]

Originally Posted by focus_wrc

Cool how does the car dirve on street??

Car drives normal but with more torque.

[CFM Focus]

Originally Posted by REDFOCZ

Very nice, is there a dyno video of this car? I bet it sounds mean at 7000+ RPM's

We're going to install big cams and turn it up to around 8,000-8,500 or higher if we need to.

Here's the only video we currently have on the car. More to come...

CFM 12 sec Nitrous Powered Focus.

This Focus has ran a best of 12.7 @ 108

[Reza]

what was the time without nitrous?

[JFocus]

That's sick! I love it!

[starfuryt550]

is there a price estimate on what the intake manifold would cost once they are finished?

[Nikzts]

very interesting.....good thing to know that it drives good on the streets

[Reza]

Great jobs guys. That JRSC BBK numbers with NA you don't have to worry about the heat soaks all the other problems that comes with boost. Great Job.

IMHO I think you guys can change a few Things.

1-Using A CAI instead of Short ram.
2-Better Intake manifold for sure.
3-More Revs.
4-a 2.5" Exhaust. The Magnaflow is 2.25" which is smaller than SVT Exhaust. And Borla uses a 2.25" Muffler. so anything that 2.5" Across the band should help you a a lot.

Now How about The SVT guys like us?????

[Cameroon]

Originally Posted by focus_wrc

Now How about The SVT guys like us?????

Just swap out your top end for their stuff, you wouldn't even need the head decked.

You already have the compresion and exhaust with an SVT.

It would be far more cost effective to just swap out the head and intake side and get a custom tune.

I don't know that the ROI on a worked over SVT head and cams with VCT delete would be worth it.

The SVT head, being better to startwith, would most likely just require less work to get were CFM's zetec head is and my not be any better when all is said and done.

[Reza]

Originally Posted by Cameroon

Just swap out your top end for their stuff, you wouldn't even need the head decked.

You already have the compresion and exhaust with an SVT.

It would be far more cost effective to just swap out the head and intake side and get a custom tune.

I don't know that the ROI on a worked over SVT head and cams with VCT delete would be worth it.

The SVT head, being better to startwith, would most likely just require less work to get were CFM's zetec head is and my not be any better when all is said and done.

Its not that easy Buddy.

The compression on SVT comes form the head and not the pistons. If you swap the head with the Zetec head the compression would be lower than the zetec.

I don't want the VCT be deleted because most of my low end tq come from VCT and i make as much as you in low end because of it. If I remove the VCT the low end

you cant use the intake Manifold of SVT on the Zetec head. I don't want to change the intake manifold my SVT to zetec because SVT has a lot better intake manifold.

and they have the SVT head already and waiting for the valves. The SVT head is a lot better than Zetec head.

[2Slik]

Originally Posted by CFM Focus

We're going to install big cams and turn it up to around 8,000-8,500 or higher if we need to.

Here's the only video we currently have on the car. More to come...

CFM 12 sec Nitrous Powered Focus.

This Focus has ran a best of 12.7 @ 108

You guys need to post in the CFL region forum to let us know when you are going to run. I'd love to see this stuff in action and I'm sure a few other guys would be interested as well.

[hotfocus]

Damn yall got me by 15hp!!!!! My stage 2 comps make my engine bi-polar, very calm under 3500, sometime it want to start bucking if im haning too low in the rpms. anything over that is crazy. Is your intake manifold going to go in to production for the public?

[CFM Focus]

Originally Posted by hotfocus

Is your intake manifold going to go in to production for the public?

That's the plan if we can make them affordable enough.

[starfuryt550]

will you be selling just the manifold too, or only as a complete kit with everything?

[cfmfocus2]

Yes, We would offer the manifold by itself.

[hotfocus]

Great! projected price range? After my 15 month vacation we need talk.

[IslandFocus]

I can test the manifold out for you guys on a built turbo motor........free of charge

[Johnny_P]

WOW, congratulations guys, those numbers are SICK!