Underdrive Pulley - Duratec - Page 2 - Focaljet

**paulhaskew** · 10-25-2007, 05:37 PM

You asked me about these in a PM, my answer hasn't changed and you would have had the tools by now...

Call Steve at Tousley and ask for these part #s

TDC Timing bolt ( 303-507 )
Camshaft alignment plate ( 303-465 )

If you feel like calling your local dealer they can be found on the Rotunda Tool List...

**cfmfocus2** · 10-26-2007, 12:14 PM

Our timing bolt and aligment plate kit is $39.95. The same parts from Ford would be $30.00 more. We will have the installation instructions and part on the website later today. Sorry about the delay.

**cfmfocus2** · 10-26-2007, 02:54 PM

Here is the link for the part.

**paulhaskew** · 10-26-2007, 06:15 PM

ah hah! now you have them... booooo

After I finish my build...

**xalexakaspyderx** · 11-19-2007, 02:54 PM

do you got pictures of the pulleys from the back as well. i use to have the FC PULLEYS but id like to see how these were made and look from the back if i may plz?

**cfmfocus2** · 11-20-2007, 04:19 PM

Picture of the back side of the crank pulley

**only_in_a_domestic** · 11-20-2007, 05:11 PM

ballin... i still love mine

**2.3focuszx3** · 11-21-2007, 05:16 AM

ok i didnt take the time to read all the replies so if your ?'s were answered then sorry for the repo...

the answer for the "m6" bolt and "plate" are....

when alinging the cam gears there is a special tool (you can rent at autozone) that hold the two cam shafts in sync while you tighten the belt up.....

it allows you to not mess up and it makes it easier....... i replaced cams in my friends neon.......and they say fords are hard to work on..... at least our cams are on the top not in the side........lol

**xalexakaspyderx** · 11-21-2007, 12:14 PM

it sorta looks the same like the focus central ones. only looks likes welds on the screws.

im not trying to MASH on yor product just curoius thats all. i did like my pulleys i had before

Quote:

Originally Posted by cfmfocus2

Picture of the back side of the crank pulley

**cfmfocus2** · 11-21-2007, 12:54 PM

The big problem with the FC design was the screws were coming loose, so we welded the screws in place on the ones we made to prevent this problem.

**xalexakaspyderx** · 11-22-2007, 05:22 AM

even if weled if NOT installed right it wont SHEER off? i remmber seen some pictures like that where the screws came right off. with mine thank god i didnt have thta problem but switched back to be safer then sorry. but hmmm ok thx maybe ill eb interested again in the pulley.s i liked the last ones i had ONLY sometimes the car would stall or felt like it would choke when soemtimes letting off the clutch. would you knwo why ???

**cfmfocus2** · 11-22-2007, 08:22 AM

The FC had problems since the bolts holding in the trigger wheel came loose while the engine was rotating. If the bolts where welded in place, it would not of came loose and caused the damage it did to the engine and the pulley.

If someone installs a duratec crank pulley incorrectly by putting it in the wrong position, someone can damage their engine. The trigger wheel has to be in the correct postion for the engine to have the correct timing.

**xalexakaspyderx** · 11-24-2007, 12:44 AM

mmm ok so the welds will not scap up againt the egnor aything. ive seen pitues of tht before. but im down with welds. and the FC 's were installed right. car would stall sometimes. but why would it do that? sometimes felt like the engine was choking or soemthing. but the lil power was noticeable

. and will they have tha same affect like taxing some of the power like for teh AC / radio or dim the lites a lil when at a complete stop. i did notice that. LIKE i said i am not knocking on ya product since i was a duratec pulley customer before and may want to add them again.

**afraziaaaa** · 11-25-2007, 06:44 PM

Quote:

Originally Posted by cfmfocus2

Our timing bolt and aligment plate kit is $39.95. The same parts from Ford would be $30.00 more. We will have the installation instructions and part on the website later today. Sorry about the delay.

Found the tools. Are the instructions on the site? I can't find them....

10-25-2007, 05:37 PM	#26
paulhaskew Senior TEAM Member Join Date: May 2005 Location: Pierce County, WA Posts: 3,217	Re: Underdrive Pulley - Duratec You asked me about these in a PM, my answer hasn't changed and you would have had the tools by now... Call Steve at Tousley and ask for these part #s TDC Timing bolt ( 303-507 ) Camshaft alignment plate ( 303-465 ) If you feel like calling your local dealer they can be found on the Rotunda Tool List... __________________ 2005 CD Silver ST-T - 322.7whp / 294.4wtq Motive Racing - [> = my friend! I, like God, do not play with dice and do not believe in coincidence. Words are the means to meaning, and for some, the annunciation of truth. And the truth is, there is something terribly wrong with this country.

10-26-2007, 12:14 PM	#27
cfmfocus2 Premier Sponsor Join Date: Nov 2004 Posts: 856	Re: Underdrive Pulley - Duratec Our timing bolt and aligment plate kit is $39.95. The same parts from Ford would be $30.00 more. We will have the installation instructions and part on the website later today. Sorry about the delay. __________________ William - Sales Dept / Central Florida Motorsports, Inc. - Since 1996 william@c-f-m.com / Online Customer Service / 407.339.9211 We match ALL advertised prices on products we carry! Our Latest Products / SVT Focus Parts Video of our 12 second Vortech Supercharged 1/4 mile Focus / Engine Specs Come see our new show room! Last edited by cfmfocus2 : 10-26-2007 at 04:47 PM.

10-26-2007, 02:54 PM	#28
cfmfocus2 Premier Sponsor Join Date: Nov 2004 Posts: 856	Re: Underdrive Pulley - Duratec Here is the link for the part. __________________ William - Sales Dept / Central Florida Motorsports, Inc. - Since 1996 william@c-f-m.com / Online Customer Service / 407.339.9211 We match ALL advertised prices on products we carry! Our Latest Products / SVT Focus Parts Video of our 12 second Vortech Supercharged 1/4 mile Focus / Engine Specs Come see our new show room! Last edited by cfmfocus2 : 10-27-2007 at 10:03 AM.

10-26-2007, 06:15 PM	#29
paulhaskew Senior TEAM Member Join Date: May 2005 Location: Pierce County, WA Posts: 3,217	Re: Underdrive Pulley - Duratec ah hah! now you have them... booooo After I finish my build... __________________ 2005 CD Silver ST-T - 322.7whp / 294.4wtq Motive Racing - [> = my friend! I, like God, do not play with dice and do not believe in coincidence. Words are the means to meaning, and for some, the annunciation of truth. And the truth is, there is something terribly wrong with this country.

11-19-2007, 02:54 PM	#30
xalexakaspyderx TEAM Member Join Date: May 2006 Location: montebello CA, 90640 Posts: 841	Re: Underdrive Pulley - Duratec do you got pictures of the pulleys from the back as well. i use to have the FC PULLEYS but id like to see how these were made and look from the back if i may plz?

11-20-2007, 04:19 PM	#31
cfmfocus2 Premier Sponsor Join Date: Nov 2004 Posts: 856	Re: Underdrive Pulley - Duratec Picture of the back side of the crank pulley __________________ William - Sales Dept / Central Florida Motorsports, Inc. - Since 1996 william@c-f-m.com / Online Customer Service / 407.339.9211 We match ALL advertised prices on products we carry! Our Latest Products / SVT Focus Parts Video of our 12 second Vortech Supercharged 1/4 mile Focus / Engine Specs Come see our new show room!

11-20-2007, 05:11 PM	#32
only_in_a_domestic Senior TEAM Member Join Date: Mar 2004 Location: Florida Posts: 1,484	Re: Underdrive Pulley - Duratec ballin... i still love mine __________________ weight reduction= no sig:-)

11-21-2007, 05:16 AM	#33
2.3focuszx3 TEAM Member Join Date: Nov 2006 Posts: 196	Re: Underdrive Pulley - Duratec ok i didnt take the time to read all the replies so if your ?'s were answered then sorry for the repo... the answer for the "m6" bolt and "plate" are.... when alinging the cam gears there is a special tool (you can rent at autozone) that hold the two cam shafts in sync while you tighten the belt up..... it allows you to not mess up and it makes it easier....... i replaced cams in my friends neon.......and they say fords are hard to work on..... at least our cams are on the top not in the side........lol

11-21-2007, 12:54 PM	#35
cfmfocus2 Premier Sponsor Join Date: Nov 2004 Posts: 856	Re: Underdrive Pulley - Duratec The big problem with the FC design was the screws were coming loose, so we welded the screws in place on the ones we made to prevent this problem. __________________ William - Sales Dept / Central Florida Motorsports, Inc. - Since 1996 william@c-f-m.com / Online Customer Service / 407.339.9211 We match ALL advertised prices on products we carry! Our Latest Products / SVT Focus Parts Video of our 12 second Vortech Supercharged 1/4 mile Focus / Engine Specs Come see our new show room! Last edited by cfmfocus2 : 11-21-2007 at 01:38 PM.

11-22-2007, 05:22 AM	#36
xalexakaspyderx TEAM Member Join Date: May 2006 Location: montebello CA, 90640 Posts: 841	Re: Underdrive Pulley - Duratec even if weled if NOT installed right it wont SHEER off? i remmber seen some pictures like that where the screws came right off. with mine thank god i didnt have thta problem but switched back to be safer then sorry. but hmmm ok thx maybe ill eb interested again in the pulley.s i liked the last ones i had ONLY sometimes the car would stall or felt like it would choke when soemtimes letting off the clutch. would you knwo why ???

11-22-2007, 08:22 AM	#37
cfmfocus2 Premier Sponsor Join Date: Nov 2004 Posts: 856	Re: Underdrive Pulley - Duratec The FC had problems since the bolts holding in the trigger wheel came loose while the engine was rotating. If the bolts where welded in place, it would not of came loose and caused the damage it did to the engine and the pulley. If someone installs a duratec crank pulley incorrectly by putting it in the wrong position, someone can damage their engine. The trigger wheel has to be in the correct postion for the engine to have the correct timing. __________________ William - Sales Dept / Central Florida Motorsports, Inc. - Since 1996 william@c-f-m.com / Online Customer Service / 407.339.9211 We match ALL advertised prices on products we carry! Our Latest Products / SVT Focus Parts Video of our 12 second Vortech Supercharged 1/4 mile Focus / Engine Specs Come see our new show room!

11-24-2007, 12:44 AM	#38
xalexakaspyderx TEAM Member Join Date: May 2006 Location: montebello CA, 90640 Posts: 841	Re: Underdrive Pulley - Duratec mmm ok so the welds will not scap up againt the egnor aything. ive seen pitues of tht before. but im down with welds. and the FC 's were installed right. car would stall sometimes. but why would it do that? sometimes felt like the engine was choking or soemthing. but the lil power was noticeable . and will they have tha same affect like taxing some of the power like for teh AC / radio or dim the lites a lil when at a complete stop. i did notice that. LIKE i said i am not knocking on ya product since i was a duratec pulley customer before and may want to add them again.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode