cfm trottle bodie install instrutions - The Ford Focus Forum

**cdsilver bullit** · 09-01-2009, 08:03 PM

i have a 65 mm cfm trottle bodie need install instrutions it is going on a 2001 zx3 zetec

**cfmfocus2** · 09-02-2009, 09:26 AM

Please send me an e-mail, and I will respond back with the instructions. Thank you.

**hEaT** · 09-02-2009, 11:31 AM

It should be pretty straight forward. If you haven't heard back from CFM, here is what I would do:

Remove intake tube between throttle body and MAF
Unplug TPS
Remove throttle and cruise cables from throttle body
Unbolt and remove throttle body
Swap TPS
Swap cable bracket
Install new TB
Reverse the other steps

I've only had experience with a crappy FC unit, so I'm not sure what the idle adjustment procedure is on the CFM piece. In my experience I've always backed off the adjustment screw fully and then turned it in until it just touches the plate.

Be careful with the the TPS as well. It's pretty delicate.

09-01-2009, 08:03 PM	#1 (permalink)
cdsilver bullit TEAM Member Join Date: Sep 2008 Location: jacksonville fla. Posts: 437	cfm trottle bodie install instrutions i have a 65 mm cfm trottle bodie need install instrutions it is going on a 2001 zx3 zetec __________________ 2001 euro trash project mods st170's svt wing carbon fiber evo style hood custom exaust saleen front bumper aem intake speed demon coilpak coilovers n.o.s header and sct programer svt rear and side skirts contour blue valve cover and some fresh paint in the works

09-02-2009, 09:26 AM	#2 (permalink)
cfmfocus2 Premier Sponsor Join Date: Nov 2004 Posts: 1,218	Re: cfm trottle bodie install instrutions Please send me an e-mail, and I will respond back with the instructions. Thank you. __________________ William - Sales Dept / Central Florida Motorsports, Inc. - Est 1996 william@c-f-m.com / Live Chat / 407.339.9211 / Subscribe to CFM Forum

09-02-2009, 11:31 AM	#3 (permalink)
hEaT I <3 UC^3 Join Date: Sep 2005 Location: CT Posts: 7,447	Re: cfm trottle bodie install instrutions It should be pretty straight forward. If you haven't heard back from CFM, here is what I would do: Remove intake tube between throttle body and MAF Unplug TPS Remove throttle and cruise cables from throttle body Unbolt and remove throttle body Swap TPS Swap cable bracket Install new TB Reverse the other steps I've only had experience with a crappy FC unit, so I'm not sure what the idle adjustment procedure is on the CFM piece. In my experience I've always backed off the adjustment screw fully and then turned it in until it just touches the plate. Be careful with the the TPS as well. It's pretty delicate. __________________ 2001 Twilight Blue ZX3 - Volant Intake, FC 65mm TB, SVT Header, RT High Flow Cat, SVTF Borla Exhaust, Koni's 1985 Nimbus Grey Merkur XR4Ti - Work In Progress Tuned By: Bristol Dyno

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode