Quality Master Cylinder PLEASE!!!!!!!!

[IslandFocus]

I just snapped mine AGAIN today! Someone REALLY needs to come up with a metal replacement. I REFUSE to replace this with another OEM POS master cylinder!!!!!!!!

I originally posted a similar thread in the HTP forum a while back but since it doesn't seem as though they are interested...........could CFM PLEASE look into making one of these.

[CFM Focus]

Not sure how feasible this will be for us but I will look into it. You have any "after" pics to see how it is breaking?

[IslandFocus]

Basicly, the plastic white push rod snapped off about 2" from the end.

[SVTADAM]

I have heard that some have been able to use after market units, but there is modifications that need to be done.

[Tobyboom]

..... 45,000 miles of which over half have been beating on the car and I have NEVER broken one. Same as dogbone mounts, axles, and basically anything else that other seem to be breaking, I have never had a problem with. Perhaps its time to think of a change in driving style.

[ehancock]

yeah there was a big long thread on here about someone modding an aftermarket unit to fit. I would most definitely purchase a kit if one was made!

[focus311]

^^^ x2

[IslandFocus]

Originally Posted by Tobyboom

..... 45,000 miles of which over half have been beating on the car and I have NEVER broken one. Same as dogbone mounts, axles, and basically anything else that other seem to be breaking, I have never had a problem with. Perhaps its time to think of a change in driving style.

Well, I guess you should count your blessings because many have had this issue before. Maybe it's the stiff clutch that I have (Exedy Hyper Single Stg3) but I've seen others with different clutches have this same issue. Both times this snapped was in traffic so not sure how much I can change my driving style in traffic.