Tire Rack
Go Back   Focaljet - Ford Focus Forums > Ford Focus Performance > Duratec Tuning
   
FJ Sponsors Register FAQ Calendar Mark Forums Read

Duratec Tuning Modifying the new, powerful 2.3L and its little brother the 2.0L.

Reply
 
Thread Tools Display Modes
Old 06-26-2008, 07:45 PM   #1
baddadiam
Rookie
 
Join Date: Jun 2008
Posts: 31

Default intake and exhaust suggestions?

i've got an '06 zx4 2.0. can anyone make some suggestions. i can't find many options for the '06 on the web...
baddadiam is offline   Reply With Quote
Old 06-26-2008, 10:59 PM   #2
Dynamic05
Rookie
 
Join Date: May 2008
Location: Frederick, MD
Posts: 5

Default Re: intake and exhaust suggestions?

FocusSport CAI and Stealth Exhaust

I have a 05' zx4 2.0 and with the exhaust/CAI it makes it feel like a whole new car.
Dynamic05 is offline   Reply With Quote
Old 06-27-2008, 08:41 AM   #3
brads03zx3
[FJ] Specialist
 
Join Date: Sep 2004
Location: California
Posts: 8,395

Default Re: intake and exhaust suggestions?

I second that notion
__________________
Mountain Tested----'03 zetec
DuraMonster---'03 duratec
ZX3 vs MNTN - 9/0 & ZX3 vs TRACK - 4/1 JCM Racing #88
Bouncing Back---Bigger, Faster, Stronger
Executive Head Chief Administrative Supporting Subordinate Supervisor - Vacuum Vulture Racing
brads03zx3 is offline   Reply With Quote
Old 06-27-2008, 09:28 AM   #4
hommie
Senior TEAM Member
 
Join Date: Jan 2004
Location: Lake Stevens, WA
Posts: 4,972

Default Re: intake and exhaust suggestions?

The Focus Sprot CAI is great. For exhaust the choice is all yours depending on what sound you like. Trubendz, Focus Sport, Magnaflow, MBRP all make great products for the Focus
__________________
2006 CD Silver ZX3 FRPP Suspension, FS Cool-Flo Intake, FS Strut Tower Bar, 22mm Progress Rear Sway Bar, 17" Konig Holes.
hommie is offline   Reply With Quote
Old 06-27-2008, 06:00 PM   #5
baddadiam
Rookie
 
Join Date: Jun 2008
Posts: 31

Default Re: intake and exhaust suggestions?

do you guys know much about what kind of differences in horse power you get from one manufacturer to the next? or is it all about the same? i've seen one k&n intake for $327!!! i mean are u just paying for a brand name or horse power? same w/ exhaust... why is the mbrp $400 less than a borla???
baddadiam is offline   Reply With Quote
Old 06-28-2008, 03:19 AM   #6
AAA'S ZX4
TEAM Member
 
Join Date: Sep 2006
Location: Portland OR.
Posts: 193

Default Re: intake and exhaust suggestions?

Power out put is usally the same, and for the most part you are paying for the name. But remember that you get what you pay for and a higher price when it comes to car parts usauly equals better quality.
AAA'S ZX4 is offline   Reply With Quote
Old 06-28-2008, 09:43 AM   #7
hommie
Senior TEAM Member
 
Join Date: Jan 2004
Location: Lake Stevens, WA
Posts: 4,972

Default Re: intake and exhaust suggestions?

As far as intakes go the F2 & Focus Sport will net you the best power. The Exhaust's are all about the same. It just depends if you want a 2-1/4" or 2-1/2", if you want stainless steel. The list goes on and on. However they should all net about the same power out put.
__________________
2006 CD Silver ZX3 FRPP Suspension, FS Cool-Flo Intake, FS Strut Tower Bar, 22mm Progress Rear Sway Bar, 17" Konig Holes.
hommie is offline   Reply With Quote
Old 06-28-2008, 07:46 PM   #8
Tinker
Rookie
 
Join Date: Oct 2007
Location: Alberta, Canada
Posts: 18

Default Re: intake and exhaust suggestions?

I'm kind of in the same boat as Baddadiam. I have an '07 ZX4 with the 2.3 Duratec and the only exhaust I can find from FS is a 2 1/4" which would require mods to fit the factory body kit. I was just on the Borla site and it says they don't have any part #'s for the '07 yet. I'm adding a stage 2 FS turbo kit so I'd like to go at least 2.5" diameter, don't really care if it's stainless or not. Help!
Tinker is offline   Reply With Quote
Old 06-28-2008, 09:40 PM   #9
baddadiam
Rookie
 
Join Date: Jun 2008
Posts: 31

Default Re: intake and exhaust suggestions?

thanks guys im most likely going to go w/ the focus sport for both. i just this focus like a month ago... it's still new to me and im not sure of what all im going to do to it , but the cai and exhaust seem like a must. i just traded in my 07 rubicon inlimited for it because the economy hit our family really good. what are (if any) some low-buck mods i can do to boost preformance?
baddadiam is offline   Reply With Quote
Old 06-29-2008, 08:55 AM   #10
hommie
Senior TEAM Member
 
Join Date: Jan 2004
Location: Lake Stevens, WA
Posts: 4,972

Default Re: intake and exhaust suggestions?

Quote:
Originally Posted by Tinker
I'm kind of in the same boat as Baddadiam. I have an '07 ZX4 with the 2.3 Duratec and the only exhaust I can find from FS is a 2 1/4" which would require mods to fit the factory body kit. I was just on the Borla site and it says they don't have any part #'s for the '07 yet. I'm adding a stage 2 FS turbo kit so I'd like to go at least 2.5" diameter, don't really care if it's stainless or not. Help!

If you are going with a Turbo then you have to choose between Trubendz & MBRP they both offer a 2-1/2" system that will work with your setup. Focus Sport is going to be coming out with a 2-1/2" system, just not sure when.
__________________
2006 CD Silver ZX3 FRPP Suspension, FS Cool-Flo Intake, FS Strut Tower Bar, 22mm Progress Rear Sway Bar, 17" Konig Holes.
hommie is offline   Reply With Quote
Old 06-29-2008, 08:56 AM   #11
hommie
Senior TEAM Member
 
Join Date: Jan 2004
Location: Lake Stevens, WA
Posts: 4,972

Default Re: intake and exhaust suggestions?

Quote:
Originally Posted by baddadiam
thanks guys im most likely going to go w/ the focus sport for both. i just this focus like a month ago... it's still new to me and im not sure of what all im going to do to it , but the cai and exhaust seem like a must. i just traded in my 07 rubicon inlimited for it because the economy hit our family really good. what are (if any) some low-buck mods i can do to boost preformance?

There are really no cheap mods. However if you want to get a intake I would check out the for sale section there are always a few intakes for sale in there for cheap.
__________________
2006 CD Silver ZX3 FRPP Suspension, FS Cool-Flo Intake, FS Strut Tower Bar, 22mm Progress Rear Sway Bar, 17" Konig Holes.
hommie is offline   Reply With Quote
Old 07-12-2008, 06:54 PM   #12
super6
TEAM Member
 
Join Date: Apr 2007
Posts: 121

Default Re: intake and exhaust suggestions?

I have the F2 CAI and the 2.5" Borla exhaust which may still be available and on sale. Check around the "other" Focus forum. 2007 2.0L with a bunch of stuff....I finally got a 91 octane tune from FocusSport and the improvement is better than I had expected.

super6
super6 is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -5. The time now is 10:06 PM.


Powered by vBulletin Version 3.5.1
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 2.4.5
I-Bulletin - Developed for vBulletin 3.5 - b6gm6n x7x7x7.com



Copyright ©2000 - 2008, Focaljet.com