got the f2 flywheel and... - Focaljet

**sayin0487** · 09-29-2008, 08:55 PM

it appears to not even be made by them? it says aasco motorsports on the box and on the flywheel

http://www.aascomotorsports.com

**brads03zx3** · 09-30-2008, 12:15 AM

And? This isn't uncommon

**sayin0487** · 09-30-2008, 08:01 AM

ya but i thought they made the flywheel themselves. it does say on their website, f2's duratec flywheel...

i dont really care, i was just a little surprised.

**Egz** · 09-30-2008, 10:26 AM

Their design, sent to a company with the fabrication tools.

**SVTCobraR315** · 09-30-2008, 02:30 PM

did you install it yet?

**sayin0487** · 09-30-2008, 07:05 PM

no lol. gotta get a clutch first. i just wanted to get one of them before they were gone. and last time i checked f2's website, they had 0 in stock.

**slokoop** · 10-01-2008, 12:06 PM

how much was it? you could get the whole exedy kit for like 700. clutch and flywheel from focus sport.

**sayin0487** · 10-01-2008, 12:20 PM

the flywheel was on sale, 100 bucks. and its a conversion flywheel, so i will able to use a zetec clutch. and im pretty sure im gonna go with the centerforce dual friction that massive sells. and thats when i actually need a clutch. i just went ahead and got this cuz it was cheap. didnt wanna pass it up

**slokoop** · 10-01-2008, 02:46 PM

oh ok- was just curious. wasn;t sure if you dropped like 300 on it or something.

**sayin0487** · 10-01-2008, 03:04 PM

nah i didnt drop that much on it

**arty** · 10-04-2008, 11:08 AM

Quote:

Originally Posted by sayin0487

it appears to not even be made by them? it says aasco motorsports on the box and on the flywheel

http://www.aascomotorsports.com

+

Is it alum or cast iron? That is really cheap for aluminum. You need to scuff the friction surface to help with breakin.

**sayin0487** · 10-04-2008, 01:17 PM

its aluminum. and i planned on scuffing the friction surface, kind of like scuffing brake pads.

09-30-2008, 12:15 AM	#2
brads03zx3 [FJ] Specialist Join Date: Sep 2004 Location: California Posts: 9,090	Re: got the f2 flywheel and... And? This isn't uncommon __________________ Mountain Tested----'03 zetec DuraMonster---'03 duratec ZX3 vs MNTN - 9/0 & ZX3 vs TRACK - 4/1 *JCM Racing #88* Bouncing Back---Bigger, Faster, Stronger Vacuum Vulture Racing - We put the ARG in 'CHARGED

09-30-2008, 10:26 AM	#4
Egz Moderator Join Date: Nov 2000 Location: Tappahannock, VA Posts: 19,443	Re: got the f2 flywheel and... Their design, sent to a company with the fabrication tools.

09-30-2008, 02:30 PM	#5
SVTCobraR315 TEAM Member Join Date: Apr 2007 Location: Coral Springs, FL / Statesville, NC Posts: 193	Re: got the f2 flywheel and... did you install it yet? __________________ 2005 ZX3: Steeda CAI, Steeda 65mm TB, Focus Sport Exhaust, FS X2, CFM Under Drive Pulleys, Focus Sport Strut Tower Brace, EBC Greenstuff Brake Pads, Enkei J10 17x7, Nitto Neo Gen 205/40/17

10-01-2008, 12:06 PM	#7
slokoop TEAM Member Join Date: Jul 2007 Location: Orlando, FL Posts: 168	Re: got the f2 flywheel and... how much was it? you could get the whole exedy kit for like 700. clutch and flywheel from focus sport. __________________ ASE Certified Ford Master Tech 07 ZX3: FS Stage 1 Turbo, Eibach pro kit, euro svt wheels, edge rear wiper, FS stealth exhaust. 190.1 HP 184.9 TQ 14.6@95

10-01-2008, 02:46 PM	#9
slokoop TEAM Member Join Date: Jul 2007 Location: Orlando, FL Posts: 168	Re: got the f2 flywheel and... oh ok- was just curious. wasn;t sure if you dropped like 300 on it or something. __________________ ASE Certified Ford Master Tech 07 ZX3: FS Stage 1 Turbo, Eibach pro kit, euro svt wheels, edge rear wiper, FS stealth exhaust. 190.1 HP 184.9 TQ 14.6@95

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode