300+whp Here I Come! - Page 3 - The Ford Focus Forum

**Focusing** · 08-23-2009, 10:40 AM

Hey but wider wheel and tire combo, dont it helps you a little minimizing spinning???

**ClintB1321** · 08-23-2009, 03:39 PM

^yes it would, jeff you gotta get on at least a 17x8 to help accommodate you future power plans.

**iceguyb14** · 08-23-2009, 06:25 PM

well later on i hope to try and run some 17x9 mustang wheels with some fender flares (f2 or custom).

til then though my 225/45/17 tires should be fine. ill just run lower boost in the lower gears.

**ClintB1321** · 08-23-2009, 09:10 PM

When i 17x9 Team Dynamics come in, ill post pics so you can check them out, you might be interested in them

**QJKXBM** · 08-23-2009, 09:13 PM

Quote:

Originally Posted by iceguyb14

ill just run lower boost in the lower gears.

that's badass, your EBC can do that?

**iceguyb14** · 08-23-2009, 11:18 PM

yeah possibly clint

and yeah qjkxbm the eboost 2 has different set points. easily changed by the push of a button on the controller itself or you can wire up a greddy push button.

after all this ill run about 11psi in first, 15psi or so in 2nd, and 18-19 in 3rd.

**iceguyb14** · 08-26-2009, 05:26 PM

hope to have the block back by the weekend and everything done by this time next week. he also is going to clean some parts of the clutch pressure plate and and flywheel. and im looking into getting another disk possibly.

more pics will be posted soon of parts.

**iceguyb14** · 08-26-2009, 06:46 PM

updated iwth more pics!

including this one..

thats pretty bad

**The_Onion** · 08-26-2009, 06:59 PM

Makes for a good paper weight..

**iceguyb14** · 08-26-2009, 10:09 PM

yeah basically

**iceguyb14** · 08-27-2009, 05:27 PM

added this to the first post

shows where i was before the engine build and where i hope to be after.

**SMITHBOY76908** · 08-27-2009, 09:24 PM

So when are projecting to have the engine in the car and firing her up cause I wanna be there! I live merely an hour away, I don't wanna miss that!

**iceguyb14** · 08-27-2009, 11:50 PM

Quote:

Originally Posted by SMITHBOY76908

So when are projecting to have the engine in the car and firing her up cause I wanna be there! I live merely an hour away, I don't wanna miss that!

probably next tuesday or so. engine builder said the block boring shop should be done boring it and honing it tomorrow and he should have it back tomorrow. and he would need ~2 days to install everything after that. if they work on it over the weekend, then sunday, if not, then tuesday. ill def tell him i wanna be there for the initial start up. ill be videoing it definitely, but you're welcome to come down.

**SMITHBOY76908** · 08-28-2009, 12:07 AM

Ah, my car won't be back up and running by then. But yeah, definitely do a video and post it up!

**iceguyb14** · 08-28-2009, 12:20 AM

will do!

**iceguyb14** · 08-31-2009, 10:00 PM

got the block back today from the machine shop.

bored .020" and honed.

now everything should be installed within a couple days

**SMITHBOY76908** · 08-31-2009, 10:44 PM

I'm installing my 28rs this weekend, you'll be dropping in your new engine this weekend, jgroove89 will be installing his turbo kit this weekend... holy ****, 3 boosted foci, all doing turbo work in the same weekend, within a couple hours of each other! lol

**iceguyb14** · 09-01-2009, 09:09 AM

lol actually the shop is installing the engine within the next couple of days.. so mine should be ready by the weekend.

ill do some datalogs and take it easy for about 500-1000 miles and then have some fun

**iceguyb14** · 09-04-2009, 08:08 AM

updated first post with a few things

**AMA828** · 09-04-2009, 11:33 AM

Hey Jeff. What is your build costing you? Isn't that clutch like a grand alone.

Your car is gonna be a monster. I want to see it with 9" wide tires.

If you take it to the drags after you break it in, make sure and let us know what your 1/4 times are.

GOOD LUCK!

**iceguyb14** · 09-04-2009, 11:50 AM

its costing a lot.. more than i care to mention.. lol

i already had the hyper single and yeah its like $1200.

**iceguyb14** · 09-04-2009, 01:42 PM

added these photos to original post

**bryst06** · 09-04-2009, 07:55 PM

its not done yet.....

**Focusfre4k** · 09-04-2009, 08:27 PM

Quote:

Originally Posted by AMA828

Hey Jeff. What is your build costing you? Isn't that clutch like a grand alone.

Your car is gonna be a monster. I want to see it with 9" wide tires.

If you take it to the drags after you break it in, make sure and let us know what your 1/4 times are.

GOOD LUCK!

he put the parts he is using in the OP...grab a calculator.

**bryst06** · 09-04-2009, 08:51 PM

its about 5k

08-23-2009, 10:40 AM	#51 (permalink)
Focusing Junior Member Join Date: Jul 2008 Location: Orlando, Florida Posts: 92	Re: 300+whp Here I Come! Hey but wider wheel and tire combo, dont it helps you a little minimizing spinning???

08-23-2009, 03:39 PM	#52 (permalink)
ClintB1321 [FJ] Specialist Join Date: Apr 2006 Location: Culver City, CA Posts: 5,365	Re: 300+whp Here I Come! ^yes it would, jeff you gotta get on at least a 17x8 to help accommodate you future power plans. __________________ Boost Camel Racing...when you don't care how rice you look in the name of speed :)

08-23-2009, 06:25 PM	#53 (permalink)
iceguyb14 Senior TEAM Member Join Date: Jul 2007 Location: Fredericksburg, Virginia Posts: 2,504	Re: 300+whp Here I Come! well later on i hope to try and run some 17x9 mustang wheels with some fender flares (f2 or custom). til then though my 225/45/17 tires should be fine. ill just run lower boost in the lower gears. __________________ - Jeff 250whp/245wtq at 11psi... *ENGINE BUILD PARTS/COSSIE IM/FSW STAGE 1 TURBO KIT/EXEDY HYPERSINGLE/FORD RACING HEAD COMPLETE WITH EVERYTHING FOR SALE!!! PM me for info.. FIRST COME FIRST SERVE*

08-23-2009, 09:10 PM	#54 (permalink)
ClintB1321 [FJ] Specialist Join Date: Apr 2006 Location: Culver City, CA Posts: 5,365	Re: 300+whp Here I Come! When i 17x9 Team Dynamics come in, ill post pics so you can check them out, you might be interested in them __________________ Boost Camel Racing...when you don't care how rice you look in the name of speed :)

08-23-2009, 11:18 PM	#56 (permalink)
iceguyb14 Senior TEAM Member Join Date: Jul 2007 Location: Fredericksburg, Virginia Posts: 2,504	Re: 300+whp Here I Come! yeah possibly clint and yeah qjkxbm the eboost 2 has different set points. easily changed by the push of a button on the controller itself or you can wire up a greddy push button. after all this ill run about 11psi in first, 15psi or so in 2nd, and 18-19 in 3rd. __________________ - Jeff 250whp/245wtq at 11psi... *ENGINE BUILD PARTS/COSSIE IM/FSW STAGE 1 TURBO KIT/EXEDY HYPERSINGLE/FORD RACING HEAD COMPLETE WITH EVERYTHING FOR SALE!!! PM me for info.. FIRST COME FIRST SERVE*

08-26-2009, 05:26 PM	#57 (permalink)
iceguyb14 Senior TEAM Member Join Date: Jul 2007 Location: Fredericksburg, Virginia Posts: 2,504	Re: 300+whp Here I Come! hope to have the block back by the weekend and everything done by this time next week. he also is going to clean some parts of the clutch pressure plate and and flywheel. and im looking into getting another disk possibly. more pics will be posted soon of parts. __________________ - Jeff 250whp/245wtq at 11psi... *ENGINE BUILD PARTS/COSSIE IM/FSW STAGE 1 TURBO KIT/EXEDY HYPERSINGLE/FORD RACING HEAD COMPLETE WITH EVERYTHING FOR SALE!!! PM me for info.. FIRST COME FIRST SERVE*

08-26-2009, 06:46 PM	#58 (permalink)
iceguyb14 Senior TEAM Member Join Date: Jul 2007 Location: Fredericksburg, Virginia Posts: 2,504	Re: 300+whp Here I Come! updated iwth more pics! including this one.. thats pretty bad __________________ - Jeff 250whp/245wtq at 11psi... *ENGINE BUILD PARTS/COSSIE IM/FSW STAGE 1 TURBO KIT/EXEDY HYPERSINGLE/FORD RACING HEAD COMPLETE WITH EVERYTHING FOR SALE!!! PM me for info.. FIRST COME FIRST SERVE*

08-26-2009, 06:59 PM	#59 (permalink)
The_Onion TEAM Member Join Date: Dec 2007 Location: Altadena, CA Posts: 379	Re: 300+whp Here I Come! Makes for a good paper weight.. __________________ Misguided Missile [Follow my sulphurous fumes!]

08-26-2009, 10:09 PM	#60 (permalink)
iceguyb14 Senior TEAM Member Join Date: Jul 2007 Location: Fredericksburg, Virginia Posts: 2,504	Re: 300+whp Here I Come! yeah basically __________________ - Jeff 250whp/245wtq at 11psi... *ENGINE BUILD PARTS/COSSIE IM/FSW STAGE 1 TURBO KIT/EXEDY HYPERSINGLE/FORD RACING HEAD COMPLETE WITH EVERYTHING FOR SALE!!! PM me for info.. FIRST COME FIRST SERVE*

08-27-2009, 05:27 PM	#61 (permalink)
iceguyb14 Senior TEAM Member Join Date: Jul 2007 Location: Fredericksburg, Virginia Posts: 2,504	Re: 300+whp Here I Come! added this to the first post shows where i was before the engine build and where i hope to be after. __________________ - Jeff 250whp/245wtq at 11psi... *ENGINE BUILD PARTS/COSSIE IM/FSW STAGE 1 TURBO KIT/EXEDY HYPERSINGLE/FORD RACING HEAD COMPLETE WITH EVERYTHING FOR SALE!!! PM me for info.. FIRST COME FIRST SERVE* Last edited by iceguyb14; 09-04-2009 at 08:25 AM.

08-27-2009, 09:24 PM	#62 (permalink)
SMITHBOY76908 TEAM Member Join Date: Jun 2008 Location: Laurel, MD Posts: 382	Re: 300+whp Here I Come! So when are projecting to have the engine in the car and firing her up cause I wanna be there! I live merely an hour away, I don't wanna miss that! __________________ WWW.WEAPONSCACHE.COM - Defend Your Rights! The only worthwhile gun control is hitting the target the first time! If guns kill people, then spoons made Micheal Moore and Rosie O' Donnel fat!

08-28-2009, 12:07 AM	#64 (permalink)
SMITHBOY76908 TEAM Member Join Date: Jun 2008 Location: Laurel, MD Posts: 382	Re: 300+whp Here I Come! Ah, my car won't be back up and running by then. But yeah, definitely do a video and post it up! __________________ WWW.WEAPONSCACHE.COM - Defend Your Rights! The only worthwhile gun control is hitting the target the first time! If guns kill people, then spoons made Micheal Moore and Rosie O' Donnel fat!

08-28-2009, 12:20 AM	#65 (permalink)
iceguyb14 Senior TEAM Member Join Date: Jul 2007 Location: Fredericksburg, Virginia Posts: 2,504	Re: 300+whp Here I Come! will do! __________________ - Jeff 250whp/245wtq at 11psi... *ENGINE BUILD PARTS/COSSIE IM/FSW STAGE 1 TURBO KIT/EXEDY HYPERSINGLE/FORD RACING HEAD COMPLETE WITH EVERYTHING FOR SALE!!! PM me for info.. FIRST COME FIRST SERVE*

08-31-2009, 10:00 PM	#66 (permalink)
iceguyb14 Senior TEAM Member Join Date: Jul 2007 Location: Fredericksburg, Virginia Posts: 2,504	Re: 300+whp Here I Come! got the block back today from the machine shop. bored .020" and honed. now everything should be installed within a couple days __________________ - Jeff 250whp/245wtq at 11psi... *ENGINE BUILD PARTS/COSSIE IM/FSW STAGE 1 TURBO KIT/EXEDY HYPERSINGLE/FORD RACING HEAD COMPLETE WITH EVERYTHING FOR SALE!!! PM me for info.. FIRST COME FIRST SERVE*

08-31-2009, 10:44 PM	#67 (permalink)
SMITHBOY76908 TEAM Member Join Date: Jun 2008 Location: Laurel, MD Posts: 382	Re: 300+whp Here I Come! I'm installing my 28rs this weekend, you'll be dropping in your new engine this weekend, jgroove89 will be installing his turbo kit this weekend... holy ****, 3 boosted foci, all doing turbo work in the same weekend, within a couple hours of each other! lol __________________ WWW.WEAPONSCACHE.COM - Defend Your Rights! The only worthwhile gun control is hitting the target the first time! If guns kill people, then spoons made Micheal Moore and Rosie O' Donnel fat!

09-01-2009, 09:09 AM	#68 (permalink)
iceguyb14 Senior TEAM Member Join Date: Jul 2007 Location: Fredericksburg, Virginia Posts: 2,504	Re: 300+whp Here I Come! lol actually the shop is installing the engine within the next couple of days.. so mine should be ready by the weekend. ill do some datalogs and take it easy for about 500-1000 miles and then have some fun __________________ - Jeff 250whp/245wtq at 11psi... *ENGINE BUILD PARTS/COSSIE IM/FSW STAGE 1 TURBO KIT/EXEDY HYPERSINGLE/FORD RACING HEAD COMPLETE WITH EVERYTHING FOR SALE!!! PM me for info.. FIRST COME FIRST SERVE*

09-04-2009, 08:08 AM	#69 (permalink)
iceguyb14 Senior TEAM Member Join Date: Jul 2007 Location: Fredericksburg, Virginia Posts: 2,504	Re: 300+whp Here I Come! updated first post with a few things __________________ - Jeff 250whp/245wtq at 11psi... *ENGINE BUILD PARTS/COSSIE IM/FSW STAGE 1 TURBO KIT/EXEDY HYPERSINGLE/FORD RACING HEAD COMPLETE WITH EVERYTHING FOR SALE!!! PM me for info.. FIRST COME FIRST SERVE*

09-04-2009, 11:33 AM	#70 (permalink)
AMA828 Junior Member Join Date: Jul 2009 Location: Albuquerque, NM Posts: 74	Re: 300+whp Here I Come! Hey Jeff. What is your build costing you? Isn't that clutch like a grand alone. Your car is gonna be a monster. I want to see it with 9" wide tires. If you take it to the drags after you break it in, make sure and let us know what your 1/4 times are. GOOD LUCK! __________________ Stock

09-04-2009, 11:50 AM	#71 (permalink)
iceguyb14 Senior TEAM Member Join Date: Jul 2007 Location: Fredericksburg, Virginia Posts: 2,504	Re: 300+whp Here I Come! its costing a lot.. more than i care to mention.. lol i already had the hyper single and yeah its like $1200. __________________ - Jeff 250whp/245wtq at 11psi... *ENGINE BUILD PARTS/COSSIE IM/FSW STAGE 1 TURBO KIT/EXEDY HYPERSINGLE/FORD RACING HEAD COMPLETE WITH EVERYTHING FOR SALE!!! PM me for info.. FIRST COME FIRST SERVE*

09-04-2009, 01:42 PM	#72 (permalink)
iceguyb14 Senior TEAM Member Join Date: Jul 2007 Location: Fredericksburg, Virginia Posts: 2,504	Re: 300+whp Here I Come! added these photos to original post __________________ - Jeff 250whp/245wtq at 11psi... *ENGINE BUILD PARTS/COSSIE IM/FSW STAGE 1 TURBO KIT/EXEDY HYPERSINGLE/FORD RACING HEAD COMPLETE WITH EVERYTHING FOR SALE!!! PM me for info.. FIRST COME FIRST SERVE*

09-04-2009, 07:55 PM	#73 (permalink)
bryst06 Senior TEAM Member Join Date: Mar 2006 Location: Michigan Posts: 2,931	Re: 300+whp Here I Come! its not done yet..... __________________ "I was thinking the FS turbo kit but I absolutely have to have a BOV..."

09-04-2009, 08:51 PM	#75 (permalink)
bryst06 Senior TEAM Member Join Date: Mar 2006 Location: Michigan Posts: 2,931	Re: 300+whp Here I Come! its about 5k __________________ "I was thinking the FS turbo kit but I absolutely have to have a BOV..."

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode