My LED license lamp solution - Page 8 - Focaljet

**CrUziN4L** · 07-06-2007, 07:37 PM

hmmm...i'd love a hatch lightZ

**v8FociDreams** · 08-10-2007, 11:44 PM

are the domes and license plate lites still available to get???? ill take both in blue or UV if i can see a pic

**focusonthis420** · 08-12-2007, 01:11 AM

I'd like a set of the license plate lamps in the bright white. Please PM me with a price when you get a chance. No rush. Thanks!

**CrUziN4L** · 08-12-2007, 04:52 AM

just PM/email him guys

**CaysE** · 08-23-2007, 01:08 PM

I got my overhead white LED board in today... I wasn't expecting bare wire connections but it installed just fine and looks good so far. I have yet to see it at night. I had this same thing in my Camaro a few years ago and loved it. It should look awesome!

**CaysE** · 08-23-2007, 09:45 PM

Do any of you notice that the overhead LEDs stay lit very dimly?

**covert1** · 08-27-2007, 06:02 PM

CaysE - I'm sure it's buried somewhere within this thread, but I posted a sort of FAQ about the lights and that phenomenon is listed. Cliff notes version: a little bit of current leaks through that circuit when the lamp has faded to "off". It's not truly off. You don't observe this with a regular bulb, however, as its resistance is far too great for it to light up at that level. LEDs, being much more sensitive, reflect this by barely lighting.

Outside of that, I hope you're enjoying one of the few modules I've been able to produce these last few months.

And on that subject - I apologize to everyone that has inquired or otherwise waited patiently. Being a federal contractor has been a successful gig for me, and having work is always better than not having work. But now that's basically my biggest hassle with respect to producing these LEDs.

Since June, we've been understaffed (IT, my profession, is low priority against space flight projects) since our last hire left in June... a dispute with management

Anyway, the two of us incumbents, myself mainly sysadmin, and the other, mainly development, were hoping the other person would offload some of our duties, but his departure basically threw that back onto me. So, take that, and 50-60 hours per week, and I'm sure you can understand why I might not be in the mood to wretch my back and crick my neck at my home "ghetto-lab station".

Unfortunately, I'd get fired fast if I attempted to make any modules while at work

That said, I have made some arrangements with an intern here, and right now he's getting acquainted as my "subcontractor". School has just started, but once he is settled in, we'll see how the modules progress.

Also - if there's anyone out there who can possibly refer me to a place that can accept a PCB layout file (Orcad, or something) that can produce a small quantity of single-layer boards for my LEDs, I'd be interested in hearing from you. It's just ironic that in a place where people design electronics, I can't find practical help, because everything is large scale (huge minimum buy) or large cost$$$.

Thanks again for hearing me out, everyone.

**CrUziN4L** · 08-27-2007, 08:27 PM

u da man!

**CaysE** · 08-27-2007, 08:30 PM

LOL I kinda like the sparkle it has at night when they're "off."

I dropped you a PM, too.

**v8FociDreams** · 09-12-2007, 10:40 AM

I'm still waiting for my blues!!

**ZTWFocus2002** · 09-25-2007, 08:24 AM

Will you be selling these now? They look great to a pain problem. If you are I want a pair. PLease let me know. Thanks

**ZTWFocus2002** · 09-25-2007, 08:29 AM

After seeing some other replies. If you get a chance to email me a price for the bright white license plates lights when you get a chance. I've got another oem replacement set to put in for this weekend. No rush just let me know when you have a chance thanks

**covert1** · 09-28-2007, 10:48 AM

Hi, everyone - I am this || close to declaring my projects "open source" because of a mixture of frustrations and new personal opportunities.

The situation with the hired help isn't working out, and though I'm told that some boards are done, I'm assuming that nothing much has happened. I take full blame for hoping that this might help out.

As it stands, when I get my stuff back, I should be able to piece together 'kits' that would require the end user to put together. I'd obviously charge a lot less, just so these things get out of my hands and into the hands of people that need 'em.

What do you all think about this? I think the community would be best served if I just give up all my little 'secrets', and give you just about all the insight you'd need. At the very least, I can identify materials and assist with calculations. There would be two guides - one outlining the design of the dome lamp (and hatch/trunk lamp variant) and another for the license lamps. I'll also share my experiences with any LED suppliers I've used.

I really, really hate letting people down, and I'm really glad that everyone has been very understanding. That's why I threw in a few months of sponsorship despite the fact I'm not even doing any business.

**Ohighway** · 10-18-2007, 05:04 PM

Interesting project. I'm new to the list and was trying to determine if anyone was "local" to me.

Ohighway

**covert1** · 10-18-2007, 05:52 PM

Haha, yes, looks like you've got me, down to the gate and the car.

You'd be the first to point me out on the forums, despite the fact I've run into others on numerous occasions.

**Ohighway** · 10-18-2007, 06:47 PM

Interesting. Small chance I would have picked you out of all the folks on this forum, but then.... a little bit of forum research and a WAG reaped a correct result.

Ohighway

Ohighway@gmail.com

**Nickgt40** · 10-25-2007, 03:08 AM

Well just let me know what you decide to do covert, because I have 1 rear lamp burned out and I think I might loose the other one soon.

**wizzbane** · 12-10-2007, 11:11 PM

Definitly would be interested in the outcome.. looking to add led license and dome/ map lights to my 07

**NewtzZx3** · 12-11-2007, 12:55 AM

i would be interested in a kit as well, i think mine are all corroded, and with the most recent exterior lighting upgrade (machs) i figure i could fix those plate lights too. and of course i wouldn't scoff at having to assemble 'em myself

**Lance_O** · 12-19-2007, 03:23 AM

I was wondering if u sell on ebay now?? cause on a listing it has UR plate # on it and says there bulb is what made UR conversion the way it is???

scroll down on the page

http://cgi.ebay.com/ebaymotors/Blue-...spagenameZWDVW

**screwdiver** · 12-19-2007, 04:28 AM

Quote:

Originally Posted by Lance_O

I was wondering if u sell on ebay now?? cause on a listing it has UR plate # on it and says there bulb is what made UR conversion the way it is???

scroll down on the page

http://cgi.ebay.com/ebaymotors/Blue-...spagenameZWDVW

HAHA...they ripped off your pic.

Covert, any plans on using higher powered LED in the license plate lamps? Like superflux or pirhana?

**covert1** · 12-21-2007, 12:24 PM

To everyone reading this (FJ members AND outside guests, "lurkers" and "googlers"): Any unauthorized use of my images to promote LED lighting products will be dealt with swiftly. In the case of this, and other auctions, people are essentially taking MY work and passing it off as their own.

Competition is fine, but do not use my images to promote products that I have nothing to do with.

I filed an infringement notice with Ebay to address this, and the numerous other auctions where this individual has been using my pictures to promote someone else's product which, in my opinion, is far inferior to what I have constructed - not only in terms of ruggedness but also quality of light.

For the rest of the FJ community - this experience might inspire me to get more lamps produced. It's hard, though, as I've been trying to do many things to keep myself out of the house (photography, especially) and light making accomplishes the opposite.

I appreciate the heads up.

**Nickgt40** · 01-07-2008, 03:40 AM

Well, when you get a chance I'd really like a set for the license plate. Just let me know

**besthaticouldo** · 05-09-2008, 12:56 PM

id like a set for both please

**o2_designs** · 05-09-2008, 01:49 PM

I just got a set used. Can't wait to get them installed...

07-06-2007, 07:37 PM	#176
CrUziN4L [FJ] Addict Join Date: Mar 2002 Location: NY Posts: 15,408	Re: My LED license lamp solution hmmm...i'd love a hatch lightZ __________________ Wanna know how to score some awesome sigs?...Add beer to a group of FJ'ers at a car show and *MIX*. haha

08-10-2007, 11:44 PM	#177
v8FociDreams Senior TEAM Member Join Date: Jan 2007 Location: Carlsbad, CA Posts: 1,753	Re: My LED license lamp solution are the domes and license plate lites still available to get???? ill take both in blue or UV if i can see a pic

08-12-2007, 01:11 AM	#178
focusonthis420 TEAM Member Join Date: Mar 2007 Location: New Jersey Posts: 126	Re: My LED license lamp solution I'd like a set of the license plate lamps in the bright white. Please PM me with a price when you get a chance. No rush. Thanks! __________________ "On a long enough timeline, the survival rate for everyone drops to zero." - Fight Club *WE ARE..... PENN STATE!*

08-12-2007, 04:52 AM	#179
CrUziN4L [FJ] Addict Join Date: Mar 2002 Location: NY Posts: 15,408	Re: My LED license lamp solution just PM/email him guys __________________ Wanna know how to score some awesome sigs?...Add beer to a group of FJ'ers at a car show and *MIX*. haha

08-23-2007, 01:08 PM	#180
CaysE EDM Specialist Join Date: Dec 2004 Location: Bloomfield, NJ Posts: 7,352	Re: My LED license lamp solution I got my overhead white LED board in today... I wasn't expecting bare wire connections but it installed just fine and looks good so far. I have yet to see it at night. I had this same thing in my Camaro a few years ago and loved it. It should look awesome! __________________ 2008 Cannondale F4 ··· Hi-brite · no mods (yet) 2003 Vermilion Red SVTf ··· hehehehehehe strictly/focused "It would take a miracle to make the entire Focus community get along. FF vs FJ, F-P vs FS, tuner vs tuner, racer vs ricer. What can you do?"

08-23-2007, 09:45 PM	#181
CaysE EDM Specialist Join Date: Dec 2004 Location: Bloomfield, NJ Posts: 7,352	Re: My LED license lamp solution Do any of you notice that the overhead LEDs stay lit very dimly? __________________ 2008 Cannondale F4 ··· Hi-brite · no mods (yet) 2003 Vermilion Red SVTf ··· hehehehehehe strictly/focused "It would take a miracle to make the entire Focus community get along. FF vs FJ, F-P vs FS, tuner vs tuner, racer vs ricer. What can you do?"

08-27-2007, 06:02 PM	#182
covert1 Grassroots Sponsor Join Date: Sep 2000 Location: aim: Bowling4Guinness Posts: 2,254	Re: My LED license lamp solution CaysE - I'm sure it's buried somewhere within this thread, but I posted a sort of FAQ about the lights and that phenomenon is listed. Cliff notes version: a little bit of current leaks through that circuit when the lamp has faded to "off". It's not truly off. You don't observe this with a regular bulb, however, as its resistance is far too great for it to light up at that level. LEDs, being much more sensitive, reflect this by barely lighting. Outside of that, I hope you're enjoying one of the few modules I've been able to produce these last few months. And on that subject - I apologize to everyone that has inquired or otherwise waited patiently. Being a federal contractor has been a successful gig for me, and having work is always better than not having work. But now that's basically my biggest hassle with respect to producing these LEDs. Since June, we've been understaffed (IT, my profession, is low priority against space flight projects) since our last hire left in June... a dispute with management Anyway, the two of us incumbents, myself mainly sysadmin, and the other, mainly development, were hoping the other person would offload some of our duties, but his departure basically threw that back onto me. So, take that, and 50-60 hours per week, and I'm sure you can understand why I might not be in the mood to wretch my back and crick my neck at my home "ghetto-lab station". Unfortunately, I'd get fired fast if I attempted to make any modules while at work That said, I have made some arrangements with an intern here, and right now he's getting acquainted as my "subcontractor". School has just started, but once he is settled in, we'll see how the modules progress. Also - if there's anyone out there who can possibly refer me to a place that can accept a PCB layout file (Orcad, or something) that can produce a small quantity of single-layer boards for my LEDs, I'd be interested in hearing from you. It's just ironic that in a place where people design electronics, I can't find practical help, because everything is large scale (huge minimum buy) or large cost$$$. Thanks again for hearing me out, everyone.

08-27-2007, 08:27 PM	#183
CrUziN4L [FJ] Addict Join Date: Mar 2002 Location: NY Posts: 15,408	Re: My LED license lamp solution u da man! __________________ Wanna know how to score some awesome sigs?...Add beer to a group of FJ'ers at a car show and *MIX*. haha

08-27-2007, 08:30 PM	#184
CaysE EDM Specialist Join Date: Dec 2004 Location: Bloomfield, NJ Posts: 7,352	Re: My LED license lamp solution LOL I kinda like the sparkle it has at night when they're "off." I dropped you a PM, too. __________________ 2008 Cannondale F4 ··· Hi-brite · no mods (yet) 2003 Vermilion Red SVTf ··· hehehehehehe strictly/focused "It would take a miracle to make the entire Focus community get along. FF vs FJ, F-P vs FS, tuner vs tuner, racer vs ricer. What can you do?"

09-12-2007, 10:40 AM	#185
v8FociDreams Senior TEAM Member Join Date: Jan 2007 Location: Carlsbad, CA Posts: 1,753	Re: My LED license lamp solution I'm still waiting for my blues!!

09-25-2007, 08:24 AM	#186
ZTWFocus2002 Newbie Join Date: Sep 2007 Posts: 2	Re: My LED license lamp solution Will you be selling these now? They look great to a pain problem. If you are I want a pair. PLease let me know. Thanks

09-25-2007, 08:29 AM	#187
ZTWFocus2002 Newbie Join Date: Sep 2007 Posts: 2	Re: My LED license lamp solution After seeing some other replies. If you get a chance to email me a price for the bright white license plates lights when you get a chance. I've got another oem replacement set to put in for this weekend. No rush just let me know when you have a chance thanks

09-28-2007, 10:48 AM	#188
covert1 Grassroots Sponsor Join Date: Sep 2000 Location: aim: Bowling4Guinness Posts: 2,254	Re: My LED license lamp solution Hi, everyone - I am this \|\| close to declaring my projects "open source" because of a mixture of frustrations and new personal opportunities. The situation with the hired help isn't working out, and though I'm told that some boards are done, I'm assuming that nothing much has happened. I take full blame for hoping that this might help out. As it stands, when I get my stuff back, I should be able to piece together 'kits' that would require the end user to put together. I'd obviously charge a lot less, just so these things get out of my hands and into the hands of people that need 'em. What do you all think about this? I think the community would be best served if I just give up all my little 'secrets', and give you just about all the insight you'd need. At the very least, I can identify materials and assist with calculations. There would be two guides - one outlining the design of the dome lamp (and hatch/trunk lamp variant) and another for the license lamps. I'll also share my experiences with any LED suppliers I've used. I really, really hate letting people down, and I'm really glad that everyone has been very understanding. That's why I threw in a few months of sponsorship despite the fact I'm not even doing any business.

10-18-2007, 05:04 PM	#189
Ohighway Rookie Join Date: Oct 2007 Location: Howard County, Maryland Posts: 13	Re: My LED license lamp solution Interesting project. I'm new to the list and was trying to determine if anyone was "local" to me. Ohighway Last edited by Ohighway : 10-18-2007 at 09:37 PM.

10-18-2007, 05:52 PM	#190
covert1 Grassroots Sponsor Join Date: Sep 2000 Location: aim: Bowling4Guinness Posts: 2,254	Re: My LED license lamp solution Haha, yes, looks like you've got me, down to the gate and the car. You'd be the first to point me out on the forums, despite the fact I've run into others on numerous occasions.

10-18-2007, 06:47 PM	#191
Ohighway Rookie Join Date: Oct 2007 Location: Howard County, Maryland Posts: 13	Re: My LED license lamp solution Interesting. Small chance I would have picked you out of all the folks on this forum, but then.... a little bit of forum research and a WAG reaped a correct result. Ohighway Ohighway@gmail.com Last edited by Ohighway : 10-18-2007 at 09:36 PM.

12-10-2007, 11:11 PM	#193
wizzbane Newbie Join Date: Mar 2007 Posts: 1	Re: My LED license lamp solution Definitly would be interested in the outcome.. looking to add led license and dome/ map lights to my 07

12-11-2007, 12:55 AM	#194
NewtzZx3 Senior TEAM Member Join Date: Mar 2003 Location: Madison, WI Posts: 1,478	Re: My LED license lamp solution i would be interested in a kit as well, i think mine are all corroded, and with the most recent exterior lighting upgrade (machs) i figure i could fix those plate lights too. and of course i wouldn't scoff at having to assemble 'em myself __________________ "She turned me into a Newt!"..."A Newt?"..."I got better..." "You might be an engineer if...In college, you thought Spring Break was metal fatigue failure" 2002 Black ZX5 - the mods are pilling up now!

12-19-2007, 03:23 AM	#195
Lance_O Newbie Join Date: Sep 2004 Posts: 1	Re: My LED license lamp solution I was wondering if u sell on ebay now?? cause on a listing it has UR plate # on it and says there bulb is what made UR conversion the way it is??? scroll down on the page http://cgi.ebay.com/ebaymotors/Blue-...spagenameZWDVW

12-21-2007, 12:24 PM	#197
covert1 Grassroots Sponsor Join Date: Sep 2000 Location: aim: Bowling4Guinness Posts: 2,254	Re: My LED license lamp solution To everyone reading this (FJ members AND outside guests, "lurkers" and "googlers"): Any unauthorized use of my images to promote LED lighting products will be dealt with swiftly. In the case of this, and other auctions, people are essentially taking MY work and passing it off as their own. Competition is fine, but do not use my images to promote products that I have nothing to do with. I filed an infringement notice with Ebay to address this, and the numerous other auctions where this individual has been using my pictures to promote someone else's product which, in my opinion, is far inferior to what I have constructed - not only in terms of ruggedness but also quality of light. For the rest of the FJ community - this experience might inspire me to get more lamps produced. It's hard, though, as I've been trying to do many things to keep myself out of the house (photography, especially) and light making accomplishes the opposite. I appreciate the heads up.

05-09-2008, 12:56 PM	#199
besthaticouldo TEAM Member Join Date: Dec 2005 Location: Laguna Niguel, CA Posts: 667	Re: My LED license lamp solution id like a set for both please

05-09-2008, 01:49 PM	#200
o2_designs Resident Wheel-Whore Join Date: Oct 2004 Location: Rochester MN Posts: 9,264	Re: My LED license lamp solution I just got a set used. Can't wait to get them installed... __________________ *~~Boost Crew supports single mothers~~* *_/ ResidentWheel-Whore\_* 'Bone Stock'2002 TwilightBlue ZX3-Neglect has led to a nasty whine from under tha rusty hood. (CHROMED) STS Prep'd 2001 Pitch Black 5spd Wagon-(666-STFU) "Your mom has an SVT bumper..."-Pappy, 2008 --No longer allowed access to FJ 'For Sale' Forums. Has a uncontrollable urge to buy stuff I don't need--