194 bulb in MACH assembly, anyone use something else? - Focaljet

**TJs98GT** · 06-24-2008, 10:07 AM

instead of a standard white bulb? like a hyperwhite or diff color LEDs or anything like that?

**TJs98GT** · 06-24-2008, 12:44 PM

my friend at work had an extra blue LED so i through it in the one side and it looked to bright i think. idk if id be drawing un-needed attention or get tickets for it. and then of course i dropped my bulb and dont know where it went, its a PITA to get my hand up in there so im just trying to figure out what bulb i wanna put back in there. wondering if a white LED would look cool or not.

**1svt4u2c** · 06-24-2008, 12:50 PM

www.hoen-usa.com

try them. I want to get a set so they match the H.I.D.'s better, along with the fogs, but I dont remember off hand which fog's to get.

xenonmatch i think.

Right now I'm running some from Wal-Mart. They were blue in color, but are a type of "hyper white" and they dont look TOO bad right now. Had them for a few years, and they still work.

-Matt

**TJs98GT** · 06-25-2008, 02:24 PM

bump for more opinions

**o2_designs** · 06-25-2008, 03:20 PM

I use some little blue bulb in my ST170's. Has a silverstar style white/bluish tint to them.

**FORDSVTPARTS** · 06-25-2008, 03:22 PM

I just used amber 194's in mine.

**SVTEuro** · 06-26-2008, 11:55 AM

I use amber LEDs

**focusownerskid** · 06-26-2008, 12:16 PM

I'm swapping to Amber next time they're off the car.

- Drew

**FORDSVTPARTS** · 06-26-2008, 12:19 PM

Quote:

Originally Posted by focusownerskid

I'm swapping to Amber next time they're off the car.

- Drew

I can change them with the lights in the car, It's not terribly easy but I have done it a couple times.

**focusownerskid** · 06-26-2008, 01:02 PM

Oh, I know.

I just have to remove them to swap to cleaner lenses anyway

- Drew

**Pappy** · 06-26-2008, 01:22 PM

I also just run amber 194's.

**slipster17** · 06-26-2008, 03:01 PM

I have a set of the little white LED match bulbs Hoen in my ST170's city light and I love the look. Matches the fogs nice

**screwdiver** · 06-26-2008, 05:39 PM

Quote:

Originally Posted by FORDSVTPARTS

I just used amber 194's in mine.

Last time I had mine off I tried an amber bulb and it looked really dim. I might buy an LED white bulb to put in there.

**TJs98GT** · 06-27-2008, 08:04 AM

Quote:

Originally Posted by screwdiver

Last time I had mine off I tried an amber bulb and it looked really dim. I might buy an LED white bulb to put in there.

thats what i wanna do too

**Dads03SVT** · 06-27-2008, 09:33 AM

I changed all mine over to hyper white LED's....even my stock taillights i found 3157's with 57 led's in them. I think it looks way better at night...I also put Hyper-yellow bulbs in driving lights.

**HeavyFluid** · 06-30-2008, 01:20 AM

I am running amber 194 LED's, along with hyperwhite clear turn signal bulbs in my MACH's. I have the grille lights completely blacked out, no nightshade. I think that it looks really good.

06-24-2008, 10:07 AM	#1
TJs98GT TEAM Member Join Date: Jan 2008 Location: North Jersey Posts: 401	194 bulb in MACH assembly, anyone use something else? instead of a standard white bulb? like a hyperwhite or diff color LEDs or anything like that? __________________ 1998 Mustang GT, Vortech T-Trim(16#s intercooled), Forged 302 stroker, Stage 2 Ported Polished Heads, Comp XE274 Cams, Ported/Polished Bullitt Intake Manifold, TKO Trans, 03 Cobra IRS swap. http://rides.webshots.com/album/559219923mdvdiw 2002 SVT Focus #3473 of 4788 born on 7-24-02 K&N Filter w/silencer removed, EAP HID headlights, SCT Tuned, CFM Adj STS, Black EAPs

06-24-2008, 12:44 PM	#2
TJs98GT TEAM Member Join Date: Jan 2008 Location: North Jersey Posts: 401	Re: 194 bulb in MACH assembly, anyone use something else? my friend at work had an extra blue LED so i through it in the one side and it looked to bright i think. idk if id be drawing un-needed attention or get tickets for it. and then of course i dropped my bulb and dont know where it went, its a PITA to get my hand up in there so im just trying to figure out what bulb i wanna put back in there. wondering if a white LED would look cool or not. __________________ 1998 Mustang GT, Vortech T-Trim(16#s intercooled), Forged 302 stroker, Stage 2 Ported Polished Heads, Comp XE274 Cams, Ported/Polished Bullitt Intake Manifold, TKO Trans, 03 Cobra IRS swap. http://rides.webshots.com/album/559219923mdvdiw 2002 SVT Focus #3473 of 4788 born on 7-24-02 K&N Filter w/silencer removed, EAP HID headlights, SCT Tuned, CFM Adj STS, Black EAPs

06-24-2008, 12:50 PM	#3
1svt4u2c Senior TEAM Member Join Date: Jun 2004 Location: York, PA Posts: 1,310	Re: 194 bulb in MACH assembly, anyone use something else? www.hoen-usa.com try them. I want to get a set so they match the H.I.D.'s better, along with the fogs, but I dont remember off hand which fog's to get. xenonmatch i think. Right now I'm running some from Wal-Mart. They were blue in color, but are a type of "hyper white" and they dont look TOO bad right now. Had them for a few years, and they still work. -Matt __________________ 2003 Infra Red SVT #2940 of 3985 AEM SRI, CFM 67mm TB, FC Pulley's, ORP - MIL, Magnaflow Exhaust, VF Rear Engine Mount, FC STS, SCT II [Ray@McNews Tune], Weighted Shift Knob, Slotted and Drilled R1 Rotors, Removed Rear Seats, Competition Stage II Clutch, Spec Flywheel, Torsen LSD and Black TYC Tails

06-25-2008, 02:24 PM	#4
TJs98GT TEAM Member Join Date: Jan 2008 Location: North Jersey Posts: 401	Re: 194 bulb in MACH assembly, anyone use something else? bump for more opinions __________________ 1998 Mustang GT, Vortech T-Trim(16#s intercooled), Forged 302 stroker, Stage 2 Ported Polished Heads, Comp XE274 Cams, Ported/Polished Bullitt Intake Manifold, TKO Trans, 03 Cobra IRS swap. http://rides.webshots.com/album/559219923mdvdiw 2002 SVT Focus #3473 of 4788 born on 7-24-02 K&N Filter w/silencer removed, EAP HID headlights, SCT Tuned, CFM Adj STS, Black EAPs

06-25-2008, 03:20 PM	#5
o2_designs Resident Wheel-Whore Join Date: Oct 2004 Location: Rochester MN Posts: 9,038	Re: 194 bulb in MACH assembly, anyone use something else? I use some little blue bulb in my ST170's. Has a silverstar style white/bluish tint to them. __________________ *~~Boost Crew supports single mothers~~* *_/ ResidentWheel-Whore\_* 'Bone Stock'2002 TwilightBlue ZX3-Neglect has led to a nasty whine from under tha rusty hood. (CHROMED) STS Prep'd 2001 Pitch Black 5spd Wagon-(666-STFU) "Your mom has an SVT bumper..."-Pappy, 2008 --No longer allowed access to FJ 'For Sale' Forums. Has a uncontrollable urge to buy stuff I don't need--

06-25-2008, 03:22 PM	#6
FORDSVTPARTS TEAM Sponsor Join Date: Nov 2004 Location: Minnesota Posts: 4,473	Re: 194 bulb in MACH assembly, anyone use something else? I just used amber 194's in mine. __________________ We are Tousley Ford offering all OEM Ford and Ford Racing parts at 10% over cost. PM me here or call Steve or Kevin at 1-800-328-9552 during regular business hours. Now accepting online orders here http://www.trademotion.com/PARTLOCAT...?SITEID=214771 You can also find us here http://forums.focaljet.com/tousley-ford/ 2002 Silver SVT focus , custom CAI , Stage 2 throttle body, VF rear mount, FRPP 9mm wires, EAP/MACH HID's, Borla exhaust, K-W springs, FRPP UDP, Brisk LGS plugs, Screamin Demon coil, Diablo predator tune via Mike at Unique tuning. 153.27whp-140.56 lb.ft.

06-26-2008, 11:55 AM	#7
SVTEuro TEAM Member Join Date: Jul 2007 Location: Pittsburgh, PA Posts: 155	Re: 194 bulb in MACH assembly, anyone use something else? I use amber LEDs

06-26-2008, 12:16 PM	#8
focusownerskid Administrator Join Date: Aug 2000 Location: Monroe, MI Posts: 15,303	Re: 194 bulb in MACH assembly, anyone use something else? I'm swapping to Amber next time they're off the car. - Drew __________________ '02.5 SVTF/'01 ZX3 "28R edition"; type dRew & friends Motorsports.

06-26-2008, 01:02 PM	#10
focusownerskid Administrator Join Date: Aug 2000 Location: Monroe, MI Posts: 15,303	Re: 194 bulb in MACH assembly, anyone use something else? Oh, I know. I just have to remove them to swap to cleaner lenses anyway - Drew __________________ '02.5 SVTF/'01 ZX3 "28R edition"; type dRew & friends Motorsports.

06-26-2008, 01:22 PM	#11
Pappy TEAM Member Join Date: Aug 2005 Location: MN Posts: 808	Re: 194 bulb in MACH assembly, anyone use something else? I also just run amber 194's. __________________ 2001 ZX3 JRSC 'Vader' - 199whp/166wtq. - MNFOCUS Boost Crew Stylez.... o2designs, is my little brother.

06-26-2008, 03:01 PM	#12
slipster17 TEAM Member Join Date: Jul 2006 Location: Palmyra, PA Posts: 661	Re: 194 bulb in MACH assembly, anyone use something else? I have a set of the little white LED match bulbs Hoen in my ST170's city light and I love the look. Matches the fogs nice __________________ *It's not just a Ford Focus... It's a TRANSFORMER!* and his name is... _R E C A L L_ *2001 Egg Yolk Yellow ZX3* -Before- & -After-

06-27-2008, 09:33 AM	#15
Dads03SVT TEAM Member Join Date: Apr 2008 Location: Roxboro North Carolina Posts: 244	Re: 194 bulb in MACH assembly, anyone use something else? I changed all mine over to hyper white LED's....even my stock taillights i found 3157's with 57 led's in them. I think it looks way better at night...I also put Hyper-yellow bulbs in driving lights.

06-30-2008, 01:20 AM	#16
HeavyFluid TEAM Member Join Date: Oct 2005 Posts: 159	Re: 194 bulb in MACH assembly, anyone use something else? I am running amber 194 LED's, along with hyperwhite clear turn signal bulbs in my MACH's. I have the grille lights completely blacked out, no nightshade. I think that it looks really good. __________________ 2003 Infra-Red SVTF - low miles Appearance mods Want it? PM me.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode