front fog lights - Focaljet

**TheShocker** · 07-12-2008, 07:22 PM

was wondering on the 05+ focus what trim packages had the factory foglights, i wanna put some of these on my 07 sedan s how hard is it to do this

**SidewayzS15** · 07-13-2008, 03:28 AM

not very, just need the fog lights and housings to go in the bumper, the bulbs, and the harness for the bulb. Also I would suggest getting the headlight switch that allows for fog lights to keep the install fully OEM. If not then you just need a switch. Everything should bolt in and all you need to do is run a power and a ground.

**TheShocker** · 07-14-2008, 09:09 AM

what guage of wire should i run for the power and ground wires

**SidewayzS15** · 07-14-2008, 11:54 AM

personally I would run 16

**TheShocker** · 07-14-2008, 07:42 PM

got a pic o what 16 g looks like

**SidewayzS15** · 07-15-2008, 02:39 AM

Not off hand, you can go to any hardware store and pick it up. Dont be afraid to ask for assistance as they are there to assist you. lol

**Lumadar** · 07-15-2008, 03:20 AM

I was under the impression that all you needed were the housings, lights, and the OEM switch and it would all be plug and play. I know under my car it had pre-run factory plugs for the lights even though I did not have stock fog lights.

I already bought the fog light switch and switched the dash switch out and it operates fine, but I will be hopefully installing the lights in the next week or so.

**SidewayzS15** · 07-15-2008, 03:37 AM

I was not positive about the wiring harnesses being there or not as for one I have an 04 and had factory fogs lol

07-12-2008, 07:22 PM	#1
TheShocker Rookie Join Date: Jul 2008 Location: Fargo, North Dakota Posts: 48	front fog lights was wondering on the 05+ focus what trim packages had the factory foglights, i wanna put some of these on my 07 sedan s how hard is it to do this

07-13-2008, 03:28 AM	#2
SidewayzS15 Senior TEAM Member Join Date: Nov 2005 Location: Long Island, NY Posts: 1,077	Re: front fog lights not very, just need the fog lights and housings to go in the bumper, the bulbs, and the harness for the bulb. Also I would suggest getting the headlight switch that allows for fog lights to keep the install fully OEM. If not then you just need a switch. Everything should bolt in and all you need to do is run a power and a ground. __________________ *~~~ Built 2 Envy ~~~*

07-14-2008, 09:09 AM	#3
TheShocker Rookie Join Date: Jul 2008 Location: Fargo, North Dakota Posts: 48	Re: front fog lights what guage of wire should i run for the power and ground wires

07-14-2008, 11:54 AM	#4
SidewayzS15 Senior TEAM Member Join Date: Nov 2005 Location: Long Island, NY Posts: 1,077	Re: front fog lights personally I would run 16 __________________ *~~~ Built 2 Envy ~~~*

07-14-2008, 07:42 PM	#5
TheShocker Rookie Join Date: Jul 2008 Location: Fargo, North Dakota Posts: 48	Re: front fog lights got a pic o what 16 g looks like

07-15-2008, 02:39 AM	#6
SidewayzS15 Senior TEAM Member Join Date: Nov 2005 Location: Long Island, NY Posts: 1,077	Re: front fog lights Not off hand, you can go to any hardware store and pick it up. Dont be afraid to ask for assistance as they are there to assist you. lol __________________ *~~~ Built 2 Envy ~~~*

07-15-2008, 03:20 AM	#7
Lumadar TEAM Member Join Date: May 2007 Posts: 415	Re: front fog lights I was under the impression that all you needed were the housings, lights, and the OEM switch and it would all be plug and play. I know under my car it had pre-run factory plugs for the lights even though I did not have stock fog lights. I already bought the fog light switch and switched the dash switch out and it operates fine, but I will be hopefully installing the lights in the next week or so.

07-15-2008, 03:37 AM	#8
SidewayzS15 Senior TEAM Member Join Date: Nov 2005 Location: Long Island, NY Posts: 1,077	Re: front fog lights I was not positive about the wiring harnesses being there or not as for one I have an 04 and had factory fogs lol __________________ *~~~ Built 2 Envy ~~~*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode