Forced Induction Dyno charts & specs - Page 3 - Focaljet

**jr_psychologist** · 05-28-2007, 11:43 AM

Xios kit, stock internals, ORP, stock flex/exhaust

**Ray** · 06-02-2007, 05:34 AM

From a few months ago, sorry, i thought i posted this.

we figured we could get over 300 if we wanted, but... car is fast enough as is.

**Focuskid00** · 06-02-2007, 07:51 AM

285hp 245tq
Powerworks SC 2.4 pully
FR head
Eagle rods
JE 9.1 Pistons
Arp everything
93 Octaine

**Hitokiri** · 08-25-2007, 10:27 AM

Here's my Procharged Zetec numbers...this was on a second gear pull because 3rd gear was slipping on high RPMs and my tuner said I was losing out on 5-15 HP because of this but but I don't know.

Mods: Focussport stealth exhaust, 65 mm Focus Central throttle body, stage 1 Spec clutch, reworked SCT chip, 10 lbs Procharger kit

**-Rudel-** · 09-01-2007, 02:23 PM

Performance:
Focus-Power 2.3 Zetec Stroker Kit on CGI WRC Short Block
Focus-Power 3" Header Back Exhaust
Focus-Power Billet Main Caps, Crank, Rods, & Pistons @ 9.2-1
Ford Racing Torsen T2 Differential
Ford Racing Jet-Hot Coated SVT Header
SVT Ported & Polished Head
SVT Cam Shafts
ProCharger C-2 Supercharger using 2.55" Blower Pulley
Central Florida Motorsports 5.7" Over Drive Crank Pulley
Central Florida Motorsports 65mm Throttle Body
Clutchmaster Stage IV Clutch
Fidanza 12Lbs Flywheel
1 x Kent Cams Adjustable Cam Gear
1 x Esslinger Adjustable Cam Gear
ARP Cam Gear Bolts
ARP Studs
Siemen's Deka 60Lbs Fuel Injectors
MSD Coil Pack & 8.5mm Spark Plug Wires
180 Degree Thermostat
Godspeed Front Mount Intercooler & Custom Piping
Forged's By-pass Valve

Engine Management
J&S Vampire Ultra Safegaurd
SCT X-Caliber 2
Kenne Bell Boost-A-Pump
Diablo MAFia

Mods:
Central Florida Motorsports Intake Manifold Couplers
All 3 VF Engineering Engine Mounts

And a crap more on the exterior and interior that does not help with this chart.

**02ztsian** · 11-23-2007, 02:16 PM

My ZTS dyno sheet... mods in my signature.

It looks kinda goofy because the hp and torque were no plotted on the same grid-the left side is the torque x-axis and the right side is the hp x-axis.

**jrpasmo** · 01-07-2008, 09:59 PM

Same day, same dyno as 02ztsian.
Stock SVT with :
Procharger 8PSI
60lb injectors
MAFia
Tuned remotelly via email by Focus-power

**bruno** · 01-14-2008, 06:17 PM

Precision turbo kit.

Mods in my signature

**sonicblue02** · 01-24-2008, 09:28 PM

DIY Turbo kit
Stock SVT engine
10 psi

**FocusSportVP** · 02-10-2008, 01:02 PM

The FocusSport "Street Tuner Challenge" Focus that we built to compete on the TV show on SPEED:

**GOTBOOSTzx2** · 02-11-2008, 11:29 AM

**FocusSportVP** · 02-24-2008, 04:12 PM

ARNIE's dyno:

**FocusSportVP** · 03-14-2008, 11:07 PM

Here is MARKSZX3's dyno chart:

I think Mark only has one post on Focaljet so don't expect him to say much.

Mark if you read this, pop in and say hello!

**FocusSportVP** · 03-14-2008, 11:09 PM

Here is nitetimebolher's dyno chart:

**iceguyb14** · 05-13-2008, 10:05 PM

heres my latest dyno!

**SALEEN_N2O** · 05-18-2008, 07:37 PM

put down: 133whp and 134wtq, N/A
put down: 203whp and 226wtq, nitrous

CAI,
Magnafow cat back,
75 shot nitrous!!!

http://i292.photobucket.com/albums/m...ICSVOL2003.jpg
http://i292.photobucket.com/albums/m...ICSVOL2002.jpg

Per FJ rules, your images were too large so they have been turned into links.

**99dot** · 06-21-2008, 11:02 PM

[IMG]

[/IMG]

Just did these today at 19psi car made 353.4hp and 322.6 tq on the second run the car wouldn't build boost and the A/F was not right so I didn't go again. Looking the car over and hour later found that it blew a vaccum line off the intake manifold and was loosing boost.

So, I'll have to get another run to 24psi to know the limits. Car is crazy fast

Thanks Orange and Supersnail again for a job well done.

Oh, yeah this is with VCT

**geostef** · 07-23-2008, 03:02 PM

4th gear pull -high temps - 1st attempt with stock rev limiter and conservative spark /fuel settings

specs as per signature

05-28-2007, 11:43 AM	#51
jr_psychologist Senior TEAM Member Join Date: Mar 2005 Location: Congregating with particular people Posts: 2,359	Re: Forced Induction Dyno's, times and Specs Xios kit, stock internals, ORP, stock flex/exhaust __________________ 2002 Pitch Black SVT: Math according to Xios and FocusSport: (1 snailpower*6.8psi)/1 wheel = 235whp/209wtq

06-02-2007, 05:34 AM	#52
Ray aka demonfire Join Date: Jul 2002 Location: CT Posts: 26,356	Re: Forced Induction Dyno's, times and Specs From a few months ago, sorry, i thought i posted this. we figured we could get over 300 if we wanted, but... car is fast enough as is. __________________ Cable Ties. Is there anything they can't fix? Driver > Car - in memory of GaryK *Roadtrippin.org* \| CART

06-02-2007, 07:51 AM	#53
Focuskid00 TEAM Member Join Date: Apr 2003 Location: Phoenix, AZ Posts: 646	Re: Forced Induction Dyno's, times and Specs 285hp 245tq Powerworks SC 2.4 pully FR head Eagle rods JE 9.1 Pistons Arp everything 93 Octaine __________________ 2000 Powerworkd Black ZTS..Forged internals, FRPP head with the Massive 2.4 BBK.. 285hp 245tq!! 2005 Focus ST W/ FS StgII Turbo JCM #608

08-25-2007, 10:27 AM	#54
Hitokiri Senior TEAM Member Join Date: Oct 2002 Location: Back In Central Wisconsin (I Miss Milwaukee) Posts: 3,358	Re: Forced Induction Dyno's, times and Specs Here's my Procharged Zetec numbers...this was on a second gear pull because 3rd gear was slipping on high RPMs and my tuner said I was losing out on 5-15 HP because of this but but I don't know. Mods: Focussport stealth exhaust, 65 mm Focus Central throttle body, stage 1 Spec clutch, reworked SCT chip, 10 lbs Procharger kit __________________ "Sauske is my friend. Someone who I was finally able to form a bond with. I don't care who I have to fight. If he rips my arms off I'll kick him to death. If he rips my legs off I'll bite him to death. If he rips my head off I'll stare him to death and if he gouges out my eyes I'll curse him from beyond the grave!" - Uzumaki Naruto '01 Rainforest Green ZX3 - Procharged w/ Focussport Stealth Exhaust, FC 65mm TB, 42 lbs injectors, and retuned SCT chip - 200 HP/170 TQ to the ground Last edited by Hitokiri : 08-25-2007 at 10:38 AM.

09-01-2007, 02:23 PM	#55
-Rudel- TEAM Member Join Date: May 2006 Posts: 110	Re: Forced Induction Dyno's, times and Specs Performance: Focus-Power 2.3 Zetec Stroker Kit on CGI WRC Short Block Focus-Power 3" Header Back Exhaust Focus-Power Billet Main Caps, Crank, Rods, & Pistons @ 9.2-1 Ford Racing Torsen T2 Differential Ford Racing Jet-Hot Coated SVT Header SVT Ported & Polished Head SVT Cam Shafts ProCharger C-2 Supercharger using 2.55" Blower Pulley Central Florida Motorsports 5.7" Over Drive Crank Pulley Central Florida Motorsports 65mm Throttle Body Clutchmaster Stage IV Clutch Fidanza 12Lbs Flywheel 1 x Kent Cams Adjustable Cam Gear 1 x Esslinger Adjustable Cam Gear ARP Cam Gear Bolts ARP Studs Siemen's Deka 60Lbs Fuel Injectors MSD Coil Pack & 8.5mm Spark Plug Wires 180 Degree Thermostat Godspeed Front Mount Intercooler & Custom Piping Forged's By-pass Valve Engine Management J&S Vampire Ultra Safegaurd SCT X-Caliber 2 Kenne Bell Boost-A-Pump Diablo MAFia Mods: Central Florida Motorsports Intake Manifold Couplers All 3 VF Engineering Engine Mounts And a crap more on the exterior and interior that does not help with this chart. __________________ *Born: June 12, 2003 #2907 of 3985* SVT Silver Bullet Procharged @ 335Hp/251Tq by Focus-Power!

11-23-2007, 02:16 PM	#56
02ztsian TEAM Member Join Date: Oct 2005 Posts: 141	Re: Forced Induction Dyno's, times and Specs My ZTS dyno sheet... mods in my signature. It looks kinda goofy because the hp and torque were no plotted on the same grid-the left side is the torque x-axis and the right side is the hp x-axis. __________________ OBX 4-2-1 header, FC short shifter, MBRP exhaust, Crane St. 2 cams, Powerworks supercharger.

01-07-2008, 09:59 PM	#57
jrpasmo Junior Member Join Date: Feb 2007 Location: Calgary, AB Posts: 90	Re: Forced Induction Dyno's, times and Specs Same day, same dyno as 02ztsian. Stock SVT with : Procharger 8PSI 60lb injectors MAFia Tuned remotelly via email by Focus-power __________________ Procharged SVT 8PSI : 236whp/190wtq (on Mustang Dyno) by Focus-Power N/A ZTW : 117whp/116wtq (on Mustang Dyno) by Tecmotion

01-14-2008, 06:17 PM	#58
bruno Rookie Join Date: Dec 2004 Posts: 30	Re: Forced Induction Dyno's, times and Specs Precision turbo kit. Mods in my signature __________________ Precision turbo kit 216whp - 230wtq

01-24-2008, 09:28 PM	#59
sonicblue02 TEAM Member Join Date: Jan 2006 Posts: 179	Re: Forced Induction Dyno's, times and Specs DIY Turbo kit Stock SVT engine 10 psi __________________ Stupidity is forever, Ignorance can be fixed. There is no I in TEAM, However there is a M & E

02-10-2008, 01:02 PM	#60
FocusSportVP Premiere Sponsor Join Date: Aug 2000 Location: The Lair of The West Coast Cult Posts: 20,103	Re: Forced Induction Dyno charts & specs The FocusSport "Street Tuner Challenge" Focus that we built to compete on the TV show on SPEED: __________________ Best Regards, Randy Robles Vice President www.focussport.com / www.fswerks.com 714.630.6353 A work in progress - The 384 WHP / 341 WTQ FocusSport Turbo ZX3 - Click me! The FocusSport Street Tuner Challenge Focus 396 WHP / 347 WTQ - Click me!

02-11-2008, 11:29 AM	#61
GOTBOOSTzx2 TEAM Member Join Date: Mar 2005 Location: Florida Posts: 219	Re: Forced Induction Dyno charts & specs __________________ 352 WHP 307 WTQ Escort ZX2 Turbo Boost

02-24-2008, 04:12 PM	#62
FocusSportVP Premiere Sponsor Join Date: Aug 2000 Location: The Lair of The West Coast Cult Posts: 20,103	Re: Forced Induction Dyno charts & specs ARNIE's dyno: __________________ Best Regards, Randy Robles Vice President www.focussport.com / www.fswerks.com 714.630.6353 A work in progress - The 384 WHP / 341 WTQ FocusSport Turbo ZX3 - Click me! The FocusSport Street Tuner Challenge Focus 396 WHP / 347 WTQ - Click me!

03-14-2008, 11:07 PM	#63
FocusSportVP Premiere Sponsor Join Date: Aug 2000 Location: The Lair of The West Coast Cult Posts: 20,103	Re: Forced Induction Dyno charts & specs Here is MARKSZX3's dyno chart: I think Mark only has one post on Focaljet so don't expect him to say much. Mark if you read this, pop in and say hello! __________________ Best Regards, Randy Robles Vice President www.focussport.com / www.fswerks.com 714.630.6353 A work in progress - The 384 WHP / 341 WTQ FocusSport Turbo ZX3 - Click me! The FocusSport Street Tuner Challenge Focus 396 WHP / 347 WTQ - Click me!

03-14-2008, 11:09 PM	#64
FocusSportVP Premiere Sponsor Join Date: Aug 2000 Location: The Lair of The West Coast Cult Posts: 20,103	Re: Forced Induction Dyno charts & specs Here is nitetimebolher's dyno chart: __________________ Best Regards, Randy Robles Vice President www.focussport.com / www.fswerks.com 714.630.6353 A work in progress - The 384 WHP / 341 WTQ FocusSport Turbo ZX3 - Click me! The FocusSport Street Tuner Challenge Focus 396 WHP / 347 WTQ - Click me!

05-13-2008, 10:05 PM	#65
iceguyb14 TEAM Member Join Date: Jul 2007 Location: Fredericksburg, Virginia Posts: 619	Re: Forced Induction Dyno charts & specs heres my latest dyno! __________________ -Jeff 2005 Infra-Red Focus ST- FocusSport Turbos... For when you can never have too much power... :) http://www.cardomain.com/ride/2992424

05-18-2008, 07:37 PM	#66
SALEEN_N2O Rookie Join Date: Feb 2008 Posts: 21	Re: Forced Induction Dyno charts & specs put down: 133whp and 134wtq, N/A put down: 203whp and 226wtq, nitrous CAI, Magnafow cat back, 75 shot nitrous!!! http://i292.photobucket.com/albums/m...ICSVOL2003.jpg http://i292.photobucket.com/albums/m...ICSVOL2002.jpg Per FJ rules, your images were too large so they have been turned into links. Last edited by FocusSportVP : 05-18-2008 at 08:21 PM.

06-21-2008, 11:02 PM	#67
99dot TEAM Member Join Date: Feb 2005 Location: Kent Valley Posts: 894	Re: Forced Induction Dyno charts & specs [IMG][/IMG] Just did these today at 19psi car made 353.4hp and 322.6 tq on the second run the car wouldn't build boost and the A/F was not right so I didn't go again. Looking the car over and hour later found that it blew a vaccum line off the intake manifold and was loosing boost. So, I'll have to get another run to 24psi to know the limits. Car is crazy fast Thanks Orange and Supersnail again for a job well done. Oh, yeah this is with VCT __________________ Mods: Custom turbo kit thanks to Supersnail Fab and OrangeSvt03. and other things! Clutch is here,Thank you Southbend for a great product and service and the clutch will hold 350ftlb of Torque. SVTF 353.4hp and 322.6Tq at 19psi with VCT Last edited by 99dot : 06-22-2008 at 01:01 AM.

07-23-2008, 03:02 PM	#68
geostef TEAM Member Join Date: May 2006 Location: Athens Posts: 478	Re: Forced Induction Dyno charts & specs 4th gear pull -high temps - 1st attempt with stock rev limiter and conservative spark /fuel settings specs as per signature __________________ PowerWorks 2044cc Zetec -CR 9.7:1, Diamond pistons with Eagle rods ,lightened - weightbalanced crankshaft, 2.4'' pulley, 5.36''crank pulley, FR head with 1mm Supertech inconel valves,ported and polished supercharger manifold, Mcnews custom SC cams, SVT manifold decat with 2.75'' custom pipes with custom middle box,MTX trans 4.06 final with HyperSingle Exedy and Torsen T2 *-- from JJ POWER* --**

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode