More pictures of the NEW SET-UP - The Ford Focus Forum

**Fernan@cfm** · 07-28-2008, 02:29 PM

Here are some pictures of my new set-up

I am expecting to be back in the road in the next few days after that a few dyno pulls maybe go to the track and then swap to the new engine.

This intake manifold was completly hand made is basically a stock repalcement.

All this custom work was done by Vig Tec Fabrications@ Real Street Performance.

Vig is open to make more of this manifolds is someone is interest.

All this is made thanks to
My Dad
Hector@C-F-M
Jay Meagher@Real Street Performance
Vig Tec Fabrications@Real Street Performance
Dave@Speedmaxperformance thanks for the help in the turbo selection.

**Fernan@cfm** · 07-28-2008, 02:36 PM

More pics

I will post some more as soon i get them out of the cel phone.

**Tobyboom** · 07-28-2008, 02:48 PM

Nice custom work. Do keep us updated on dyno numbers.

**Fernan@cfm** · 07-28-2008, 02:58 PM

Quote:

Originally Posted by Tobyboom

Nice custom work. Do keep us updated on dyno numbers.

Sure i will.

A lot of more custom work was done i will post more pictures soon.

**FEELTHEPRESSURE** · 07-28-2008, 03:03 PM

How is the fuel rail secure?

**Fernan@cfm** · 07-28-2008, 03:13 PM

Quote:

Originally Posted by FEELTHEPRESSURE

How is the fuel rail secure?

I got the Steeda fuel rail and is secure with the factory bolts.

**Fernan@cfm** · 07-28-2008, 04:42 PM

More Pics

**IslandFocus** · 07-28-2008, 07:54 PM

Nice manifold but those runners look extremely short!

**Fernan@cfm** · 07-29-2008, 09:19 AM

Quote:

Originally Posted by IslandFocus

Nice manifold but those runners look extremely short!

This is the right size for our application.

**Fernan@cfm** · 07-29-2008, 09:19 AM

A few more pics

**Fernan@cfm** · 07-29-2008, 09:22 AM

**slverfocus13** · 07-29-2008, 09:55 AM

wow that is a crazy build

**midnighthaze18** · 07-29-2008, 11:05 AM

is that a catch can connected to your valve cover with the 2 hoses? also, on the left, that a custom antifreeze overflow tank or somethign different?

**Fernan@cfm** · 07-29-2008, 11:12 AM

Quote:

Originally Posted by midnighthaze18

is that a catch can connected to your valve cover with the 2 hoses? also, on the left, that a custom antifreeze overflow tank or somethign different?

Yes that is the catch can that have two -10 lines coming from the valve cover, and on the left coolant overflow but is not finish yet.

**IslandFocus** · 07-29-2008, 11:57 AM

Quote:

Originally Posted by Fernan@cfm

This is the right size for our application.

How high do you plan to rev the motor?

**midnighthaze18** · 07-29-2008, 12:10 PM

Quote:

Originally Posted by Fernan@cfm

Yes that is the catch can that have two -10 lines coming from the valve cover, and on the left coolant overflow but is not finish yet.

it all looks very nice.

Is there an advantafge to having two ports out of the valve cover? does it really "breathe" better t make a difference? Ive only seen one other person do this , thats why i ask.

**Fernan@cfm** · 07-29-2008, 02:03 PM

Quote:

Originally Posted by IslandFocus

How high do you plan to rev the motor?

Seriously I don't know yet. I use to rev 7,200 RPM's

Till makes power

jejejejeje

**PampasFoci** · 07-30-2008, 04:52 PM

WTF!!!!!!

Eres un chico malo Fernando!!!!!

**midnighthaze18** · 07-30-2008, 05:16 PM

Why is he a bad boy? cuz of the sharp 90* bends?

**turbozeteczx3** · 07-30-2008, 05:58 PM

Its 3inch thats pretty standard on a turbo build

**Bigfonsz** · 07-30-2008, 08:21 PM

Quote:

Originally Posted by turbozeteczx3

Its 3inch thats pretty standard on a turbo build

Yes it's standard but not on a zetec engine.

Quote:

Originally Posted by midnighthaze18

Why is he a bad boy? cuz of the sharp 90* bends?

90* bends are very clean. Water pump need to be rework.

This set-up is very nice . Keep up the good work.

**topspeed** · 07-30-2008, 08:58 PM

Nice intake manifold

I might be interested in one, who do I need to talk to?

**Fernan@cfm** · 08-04-2008, 03:40 PM

Almost done.

**j20000** · 08-04-2008, 03:59 PM

Holy S@!* That is Sexy.

**kennan J** · 08-04-2008, 04:01 PM

looks Official nice nice

07-28-2008, 02:29 PM	#1 (permalink)
Fernan@cfm Junior Member Join Date: Dec 2007 Posts: 50	Pictures of my new Intake Manifold & Turbo Set-up Here are some pictures of my new set-up I am expecting to be back in the road in the next few days after that a few dyno pulls maybe go to the track and then swap to the new engine. This intake manifold was completly hand made is basically a stock repalcement. All this custom work was done by Vig Tec Fabrications@ Real Street Performance. Vig is open to make more of this manifolds is someone is interest. All this is made thanks to My Dad Hector@C-F-M Jay Meagher@Real Street Performance Vig Tec Fabrications@Real Street Performance Dave@Speedmaxperformance thanks for the help in the turbo selection. Last edited by Fernan@cfm; 07-28-2008 at 03:15 PM.

07-28-2008, 02:36 PM	#2 (permalink)
Fernan@cfm Junior Member Join Date: Dec 2007 Posts: 50	Re: Pictures of my new Intake Manifold & Turbo Set-up More pics I will post some more as soon i get them out of the cel phone.

07-28-2008, 02:48 PM	#3 (permalink)
Tobyboom Senior TEAM Member Join Date: Oct 2000 Location: Fort Worth, TX Posts: 4,065	Re: Pictures of my new Intake Manifold & Turbo Set-up Nice custom work. Do keep us updated on dyno numbers. __________________ 2009 True Red MazdaSPEED3 2000 Black ZX3 with a custom hair dryer setup 1/4 Mile: 12.557 @ 112mph POWER: 302.25 HP 278.66 TQ

07-28-2008, 03:03 PM	#5 (permalink)
FEELTHEPRESSURE TEAM Member Join Date: Mar 2005 Location: OKC Posts: 153	Re: Pictures of my new Intake Manifold & Turbo Set-up How is the fuel rail secure?

07-28-2008, 04:42 PM	#7 (permalink)
Fernan@cfm Junior Member Join Date: Dec 2007 Posts: 50	Re: Pictures of my new Intake Manifold & Turbo Set-up More Pics

07-28-2008, 07:54 PM	#8 (permalink)
IslandFocus Senior TEAM Member Join Date: Oct 2004 Location: Nassau, Bahamas Posts: 2,702	Re: Pictures of my new Intake Manifold & Turbo Set-up Nice manifold but those runners look extremely short! __________________ 2000 Focus ZX3: Xios Turbo Kit on Built Motor in Progress!!

07-29-2008, 09:19 AM	#10 (permalink)
Fernan@cfm Junior Member Join Date: Dec 2007 Posts: 50	Re: Pictures of my new Intake Manifold & Turbo Set-up A few more pics

07-29-2008, 09:22 AM	#11 (permalink)
Fernan@cfm Junior Member Join Date: Dec 2007 Posts: 50	Re: Pictures of my new Intake Manifold & Turbo Set-up

07-29-2008, 09:55 AM	#12 (permalink)
slverfocus13 Senior TEAM Member Join Date: Oct 2006 Location: Palm Coast, FL Posts: 2,162	Re: Pictures of my new Intake Manifold & Turbo Set-up wow that is a crazy build __________________ 2002 CD Silver ZX3(soon to be its a secret but its got BOOST) Emissions...whats that?

07-29-2008, 11:05 AM	#13 (permalink)
midnighthaze18 Senior TEAM Member Join Date: Apr 2005 Location: Gloucester City, New Jersey Posts: 1,602	Re: Pictures of my new Intake Manifold & Turbo Set-up is that a catch can connected to your valve cover with the 2 hoses? also, on the left, that a custom antifreeze overflow tank or somethign different? __________________ New year, New evolution Stand by for tranformation.

07-30-2008, 04:52 PM	#18 (permalink)
PampasFoci TEAM Member Join Date: Sep 2001 Location: Buenos Aires, Argentina Posts: 340	Re: Pictures of my new Intake Manifold & Turbo Set-up WTF!!!!!! Eres un chico malo Fernando!!!!!

07-30-2008, 05:16 PM	#19 (permalink)
midnighthaze18 Senior TEAM Member Join Date: Apr 2005 Location: Gloucester City, New Jersey Posts: 1,602	Re: Pictures of my new Intake Manifold & Turbo Set-up Why is he a bad boy? cuz of the sharp 90* bends? __________________ New year, New evolution Stand by for tranformation.

07-30-2008, 05:58 PM	#20 (permalink)
turbozeteczx3 TEAM Member Join Date: May 2006 Posts: 669	Re: Pictures of my new Intake Manifold & Turbo Set-up Its 3inch thats pretty standard on a turbo build __________________ TURBO LAG IS GODS WAY OF GIVING V-8 A CHANCE

07-30-2008, 08:58 PM	#22 (permalink)
topspeed Premier Sponsor Join Date: Jul 2008 Location: Greenville, NC Posts: 71	Re: Pictures of my new Intake Manifold & Turbo Set-up Nice intake manifold I might be interested in one, who do I need to talk to? __________________ Chris Emanuel @ Top Speed (252) 321-6356 Top Speed, INC \| Our eBay Store \| Top Speed Online Store \| Blog \| Contact Us Be sure to check out our daily blog updates! \| The Best Way to Contact Me is by Email or Phone!

08-04-2008, 03:40 PM	#23 (permalink)
Fernan@cfm Junior Member Join Date: Dec 2007 Posts: 50	More pictures of the NEW SET-UP Almost done.

08-04-2008, 04:01 PM	#25 (permalink)
kennan J Senior TEAM Member Join Date: Mar 2002 Location: Beaverton Oregon via Alexandria VA Posts: 2,730	Re: More pictures of the NEW SET-UP looks Official nice nice __________________ IF YOU AIN'T BOUT IT, DON'T SHOUT IT! 07 RS4 Graduation present to myself , 02 SVT JRSC New numbers 246hp 190tq WMI, 2006 SRT8 Jeep Loaded www.acuzio.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode