Not sure if anyone cares, but I just bought an '07 Focus the other day. I finally got rid of my '02 ZX3 with 121500 miles, and replaced it with an '07 ZX4. Anyway, with my '02, the locks would autolock when you started to drive down the road a bit. I noticed that my new '07 did not do this. That kind of annoyed me, because I sort of liked that feature. Anyway, I called the dealer, and they forwarded me a procedure to enable/disable that feature. If anyone is interested, here is the procedure... BTW, I didn't wait the 5 minutes, and it worked fine.
1. close all doors and windows
2. confirm that the ignition key is OFF.
3. NOTE: steps 5-9 must be carried out within 30 seconds.
Turn ignition key from OFF to RUN
4. press the door lock control switch UNLOCK button 3 times.
5. turn the ignition key from RUN to OFF.
6. press the door lock control switch UNLOCK button 3 times.
7. turn the ignition key from OFF to RUN.
8. Verify that the horn chirps. this indicates the enable/disable mode is ready to accept program changes.
9. press the door lock control switch UNLOCK button then LOCK button one time to command the command the module to toggle the autolock feature.
10. Verify that the horn chirps. There should be one chirp indicating that the autolock feature is disabled.
If one chirp is heard followed by a longer sound of the horn, the autolock feature is enabled.
11. Turn the key to the OFF posiiton or wait 5 minutes to exit the enable/disable mode.
12. Verify that the horn chirps once to indicate that programming mode has been exited.
Hello and welcome to our community! Is this your first visit?
The Complete Ford Focus Enthusiast Site
Results 1 to 5 of 5
-
LinkBack
LinkBack URL
About LinkBacks- Bookmark & Share
- Tweet this thread
- Share on Facebook
-
08-10-07, 08:44 PM #1Junior Member
- Join Date
- Mar 2002
- Location
- SE PA
- Posts
- 51
2007 Focus Autolock Enable/Disable
2007 ZX4, 2.0 liter Duratech, Cossie CAI, Tri-Ax, wheels, and blacked out projectors. Not much else...
-
08-11-07, 07:52 AM #2Senior TEAM Member
- Join Date
- Feb 2005
- Location
- Kunia, HI
- Posts
- 1,347
Re: 2007 Focus Autolock Enable/Disable
I think the procedure is in the manual...I remember toying with this a while ago
-
08-11-07, 09:35 AM #3[dd] - Dentless Dave
- Join Date
- Jul 2004
- Location
- r a l e i g h , n c
- Posts
- 8,706
Re: 2007 Focus Autolock Enable/Disable
send this to Axon to put on www.focushacks.com
I don't know if it's already on there....
dave.Lacks Drop.
-
08-11-07, 10:10 AM #4Junior Member
- Join Date
- Mar 2002
- Location
- SE PA
- Posts
- 51
Re: 2007 Focus Autolock Enable/Disable
Originally Posted by zetecgt
Done. Thank you. He already had a version on the site. The version there just required you to cut a wire and install a switch.
Cliff2007 ZX4, 2.0 liter Duratech, Cossie CAI, Tri-Ax, wheels, and blacked out projectors. Not much else...
-
08-11-07, 04:13 PM #5Senior TEAM Member
- Join Date
- May 2002
- Location
- Dallas, Tx
- Posts
- 2,607
Re: 2007 Focus Autolock Enable/Disable
wooohooo worked great
Reply With Quote