how to install short shifter - Focaljet

**llamonica87** · 06-26-2008, 02:46 PM

anyone out there can help me i just bought a short shifter for my 05 zx3 and could any one give my a right up on installing it. it looks stright foward but i just want some advice

**Foci_Fosho** · 06-26-2008, 03:04 PM

I believe 05 is the same as previous years up until 2002.5

The whole process should be 15 minutes.

(going by memory)

1. untwist stock shift knob.
2. pop off shift boot.
3. (4) 8mm bolts secure the mounting plate. Loosen and remove.
4. (1) Phillips screw holding shift linkage on to the shaft. Loose and remove.
5. Pop off the linkage cable and remove reverse lock-out from shaft.
6. Remove Shaft
7. Apply the grease that came with your new shorty and insert into the ball-joint mount plate. Screw the plate down.
8. Reinstall in the reverse order.

06-26-2008, 02:46 PM	#1
llamonica87 Junior Member Join Date: Feb 2008 Location: brockron ma Posts: 59	how to install short shifter anyone out there can help me i just bought a short shifter for my 05 zx3 and could any one give my a right up on installing it. it looks stright foward but i just want some advice __________________ red 05 zx3 5speed short shift , custom CAI

06-26-2008, 03:04 PM	#2
Foci_Fosho Senior TEAM Member Join Date: May 2004 Location: Fremont/Newark, Ca Posts: 3,024	Re: how to install short shifter I believe 05 is the same as previous years up until 2002.5 The whole process should be 15 minutes. (going by memory) 1. untwist stock shift knob. 2. pop off shift boot. 3. (4) 8mm bolts secure the mounting plate. Loosen and remove. 4. (1) Phillips screw holding shift linkage on to the shaft. Loose and remove. 5. Pop off the linkage cable and remove reverse lock-out from shaft. 6. Remove Shaft 7. Apply the grease that came with your new shorty and insert into the ball-joint mount plate. Screw the plate down. 8. Reinstall in the reverse order.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode