|
|||||||
| Shift It MTX-75, Automagic and SVTF Getrag transmission junkies get your fix here. |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Senior TEAM Member
Join Date: Jun 2003
Posts: 1,141
|
I just bought an SVT and it's leaking pretty good out of the transmission. It looks like it's the axle seal, but I sprayed it down with brake cleaner and it's a little wet under the side panel. (Not sure what it's called, that plate on the side) Is there a replacement gasket for that? It seems easy to do. It was VERY low on fluid. All I had was some Mobil 1 gear oil and it sucked down that qt. and could stand some more. I'll be getting some Red Line oil shortly and changing it. I have it in my Miata and it shifts like butter.
I also was extremely relieved to find the rattle upon take off to just be a loose (not even attached!) heat shield and not the clutch! |
|
|
|
|
|
#2 (permalink) |
|
Senior TEAM Member
Join Date: Sep 2004
Location: Round Lake, IL
Posts: 3,191
|
There is no gasket. That plate uses permatex anarobic sealer. I doubt that plate is leaking though. I don't think you could re-seal it in the car anyway. It's most likely an axle seal.
__________________
03 Zetec ATX E&S TURBO SYSTEMS powered sedan 00 Mustang Gt - Built motor - Soon to be Single turbo 07 Ninja 500R Building 640cc race motor. |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|