Ford Focus Forum banner

ABS problem after replacing front bearing

2K views 1 reply 2 participants last post by  Jeepsbeme 
#1 ·
I just replaced rt side front bearing and hub on my 01 ZX3. I used Ford parts and had a shop press the new components into the spindle. According to another thread I had them press the bearing in with the black ring facing in towards the ABS sensor. Now the ABS activates every time I hit the brakes. The brakes work fine with the sensor removed from the spindle but of course the idiot light is now on. Could they have damaged the bearing when they installed it or do you usually have to replace the sensor that bolts into the spindle too?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top