So I was bashing around a bit and found this, It's a stat housing from an old Contour 2.0.
It's a one piece solid moulded housing with threaded inserts in the top, bottom and front cover.
Looks to be a much more solid piece than the SVT housing and it appears to me that it'll work with a very small amount of effort.
On to the pics, it's the Contour housing on the left and the SVT on the right.
Now the sensor in the pic I'm not sure about as I have no way to tell if it's properly calibrated but it's got the same wiring connector and it's threaded although it will require a threaded bushing adapter to use it in this housing as the hole in the top is much larger than the sensor and I don't have a threaded plug for the bottom hole.
The stat o-ring is the same as on the Focus, I do not have the bolts for the stat cover either but they should be easy enough to find.
For the housing, sensor and the front cover it's $61.00.
So, anyone up for an adventure in test fitting?
EDIT- Here's what currently comes with the updated housing.