Time is counting down. Is your car ready? - Focaljet

**JimmySolo2** · 07-04-2008, 12:41 PM

I know mine isn't. I have to put the passenger seat back in it, so I can give ride alongs.

**BadIdea** · 07-04-2008, 01:07 PM

I probably have another 4 hours of work:
radiator,
fix heater hoses do they're not sitting on the exhaust,
adjust shift linkgage,
hook up lines to the steering rack
wire kill switch to coil pack hot wire
alignment.

Hopefully it will all be done on Saturday. Passenger seat is ready to bolt in.

Recently I've done:
paint the cage
install new driver seat bracket from wedge
modify passengar seat bracket from cdoc
hubs and bearings all 4 corners with arp studs
rotors all around with daytona track pads up front
steering rack
thermostat housing and thermostat
a/c delete belt
springs, struts, shocks and lcracing plates

Oh and I reinstalled my imrc control unit with zip ties - thanks LC racing!

**sleeperlove** · 07-04-2008, 09:03 PM

I just got my car from the cage builder today. got most of the harness in.

Tomorrow I have to:
Put passenger seat in
Change oil
get new front rotors
mount sub and lap belts for both driver and passenger

Then before I leave thursday morning
I need to put rotors and Hawk blues on front
Bleed brakes
PACK

then getting seat mounts fabbed thursday afternoon before I head get to the track to set up camp.
Thank goodness I only work 8-noon monday tuesday and wednesday.

**JimmySolo2** · 07-04-2008, 11:07 PM

Oh yeah, I need a rear view mirror too.

**68 Touring Car** · 07-05-2008, 06:35 AM

Well Craig has # 69 car about ready, the# 67 car for Lowell is ready to kick some A**, the # 68 car started yesterday and is close but we still have a couple things left on the #08 car that and new guest driver will drive. I hope to get the transmission back in my Mustang to run AIX with.

**JimmySolo2** · 07-05-2008, 11:49 AM

Quote:

Originally Posted by 68 Touring Car

Well Craig has # 69 car about ready, the# 67 car for Lowell is ready to kick some A**, the # 68 car started yesterday and is close but we still have a couple things left on the #08 car that and new guest driver will drive. I hope to get the transmission back in my Mustang to run AIX with.

Is #68 the WC Touring car?

**BadIdea** · 07-05-2008, 06:17 PM

There are (2) 68 cars.

**SVTBuckeye** · 07-06-2008, 08:30 PM

Quote:

Originally Posted by 68 Touring Car

Well Craig has # 69 car about ready, the# 67 car for Lowell is ready to kick some A**, the # 68 car started yesterday and is close but we still have a couple things left on the #08 car that and new guest driver will drive. I hope to get the transmission back in my Mustang to run AIX with.

Leo
Who is the "guest" driver. Would that be an x world challenge Focus driver?
AIX and Mustange CHallenge participant? Spec Focus record holder at Grattan?

??

**sleeperlove** · 07-07-2008, 08:15 AM

Looks like rain may kill my plans for this afternoon. Hopefully tomorrow I can get the brakes done.

**68 Touring Car** · 07-07-2008, 08:20 AM

I still need to put a trans and clutch in

**sleeperlove** · 07-07-2008, 09:46 AM

I have considerably LESS work than that.

**sleeperlove** · 07-08-2008, 07:32 AM

I am leaving tomorrow now so I gotta mount harness, bed brakes , and pack this afternoon.

**68 Touring Car** · 07-08-2008, 09:30 AM

Quote:

Originally Posted by sleeperlove

I am leaving tomorrow now so I gotta mount harness, bed brakes , and pack this afternoon.

Since you have so much time you can stop by our shop and help us finish up??

**sleeperlove** · 07-08-2008, 09:38 AM

if michigan was on the way I would.
I am heading to Columbus to help jack out. They are just today dropping the engine in their Neon I think

**BadIdea** · 07-09-2008, 06:14 PM

I think I have a bad TPS. Car's running like dung.

**68 Touring Car** · 07-09-2008, 08:34 PM

Quote:

Originally Posted by BadIdea

I think I have a bad TPS. Car's running like dung.

Let Craig know at the shop (586-336-RACE) if you have anything you might need and we will bring it along. But call early the trailers will leave by noon.

**K STYLEZ** · 07-12-2008, 01:18 PM

I had an odd sound I "thought" was something loose in the suspension...

It was a FREAKIN BOLT in the damn bell housing getting beat around like a damn pin ball!!! It only happened on certain turns though...

Punished the pressure plate pretty damn good, but I think its still usable, just not quite as pretty...

I couldnt make it out folks...

**guitarseth** · 07-12-2008, 08:10 PM

We missed you Karl.

I was wondering if you were going to show up. I have pictures from today, but I'll probably upload them tomorrow morning. I'm beat and have to be at work by 6 again.

**K STYLEZ** · 07-14-2008, 01:28 PM

Yeah... I feel like such a hoser not being there... Made alot of plans I had to break. And spent alot of time running around like a mad man trying to make it...

DAMN!

**focusownerskid** · 07-16-2008, 09:18 AM

Quote:

Originally Posted by K STYLEZ

Yeah... I feel like such a hoser not being there... Made alot of plans I had to break. And spent alot of time running around like a mad man trying to make it...

DAMN!

EPIC fail.

- Drew

07-04-2008, 12:41 PM	#1
JimmySolo2 Senior TEAM Member Join Date: Aug 2001 Location: Ross Twp[ N. Pittsburgh] Posts: 2,296	Time is counting down. Is your car ready? I know mine isn't. I have to put the passenger seat back in it, so I can give ride alongs. __________________ There's Army Strong. And then there's Cubicle Strong.... I'm the second one.

07-04-2008, 01:07 PM	#2
BadIdea Senior TEAM Member Join Date: Nov 2003 Location: Cleveland Posts: 2,237	Re: Time is counting down. Is your car ready? I probably have another 4 hours of work: radiator, fix heater hoses do they're not sitting on the exhaust, adjust shift linkgage, hook up lines to the steering rack wire kill switch to coil pack hot wire alignment. Hopefully it will all be done on Saturday. Passenger seat is ready to bolt in. Recently I've done: paint the cage install new driver seat bracket from wedge modify passengar seat bracket from cdoc hubs and bearings all 4 corners with arp studs rotors all around with daytona track pads up front steering rack thermostat housing and thermostat a/c delete belt springs, struts, shocks and lcracing plates Oh and I reinstalled my imrc control unit with zip ties - thanks LC racing! __________________ '02 silver svt, sunroof (for sale), stereo (gone)

07-04-2008, 09:03 PM	#3
sleeperlove Sleeper Cars Suck Join Date: Aug 2004 Location: in the dirt Posts: 8,071	Re: Time is counting down. Is your car ready? I just got my car from the cage builder today. got most of the harness in. Tomorrow I have to: Put passenger seat in Change oil get new front rotors mount sub and lap belts for both driver and passenger Then before I leave thursday morning I need to put rotors and Hawk blues on front Bleed brakes PACK then getting seat mounts fabbed thursday afternoon before I head get to the track to set up camp. Thank goodness I only work 8-noon monday tuesday and wednesday. __________________ A nursery teacher was observing her classroom of children while they were drawing. She would occasionally walk around to see each child's work. As she got to one little girl who was working diligently, she asked what the drawing was. The girl replied, "I'm drawing God." The teacher paused and said, "But no one knows what God looks like." Without looking up from her drawing, the girl replied, "They will in a minute."

07-04-2008, 11:07 PM	#4
JimmySolo2 Senior TEAM Member Join Date: Aug 2001 Location: Ross Twp[ N. Pittsburgh] Posts: 2,296	Re: Time is counting down. Is your car ready? Oh yeah, I need a rear view mirror too. __________________ There's Army Strong. And then there's Cubicle Strong.... I'm the second one.

07-05-2008, 06:35 AM	#5
68 Touring Car Premier Sponsor Join Date: Jul 2002 Location: Motor City Posts: 1,124	Re: Time is counting down. Is your car ready? Well Craig has # 69 car about ready, the# 67 car for Lowell is ready to kick some A**, the # 68 car started yesterday and is close but we still have a couple things left on the #08 car that and new guest driver will drive. I hope to get the transmission back in my Mustang to run AIX with. __________________ Leo NASA Spec Focus Series Director www.capaldiracing.com "Quitters Never Win"

07-05-2008, 06:17 PM	#7
BadIdea Senior TEAM Member Join Date: Nov 2003 Location: Cleveland Posts: 2,237	Re: Time is counting down. Is your car ready? There are (2) 68 cars. __________________ '02 silver svt, sunroof (for sale), stereo (gone)

07-07-2008, 08:15 AM	#9
sleeperlove Sleeper Cars Suck Join Date: Aug 2004 Location: in the dirt Posts: 8,071	Re: Time is counting down. Is your car ready? Looks like rain may kill my plans for this afternoon. Hopefully tomorrow I can get the brakes done. __________________ A nursery teacher was observing her classroom of children while they were drawing. She would occasionally walk around to see each child's work. As she got to one little girl who was working diligently, she asked what the drawing was. The girl replied, "I'm drawing God." The teacher paused and said, "But no one knows what God looks like." Without looking up from her drawing, the girl replied, "They will in a minute."

07-07-2008, 08:20 AM	#10
68 Touring Car Premier Sponsor Join Date: Jul 2002 Location: Motor City Posts: 1,124	Re: Time is counting down. Is your car ready? I still need to put a trans and clutch in __________________ Leo NASA Spec Focus Series Director www.capaldiracing.com "Quitters Never Win"

07-07-2008, 09:46 AM	#11
sleeperlove Sleeper Cars Suck Join Date: Aug 2004 Location: in the dirt Posts: 8,071	Re: Time is counting down. Is your car ready? I have considerably LESS work than that. __________________ A nursery teacher was observing her classroom of children while they were drawing. She would occasionally walk around to see each child's work. As she got to one little girl who was working diligently, she asked what the drawing was. The girl replied, "I'm drawing God." The teacher paused and said, "But no one knows what God looks like." Without looking up from her drawing, the girl replied, "They will in a minute."

07-08-2008, 07:32 AM	#12
sleeperlove Sleeper Cars Suck Join Date: Aug 2004 Location: in the dirt Posts: 8,071	Re: Time is counting down. Is your car ready? I am leaving tomorrow now so I gotta mount harness, bed brakes , and pack this afternoon. __________________ A nursery teacher was observing her classroom of children while they were drawing. She would occasionally walk around to see each child's work. As she got to one little girl who was working diligently, she asked what the drawing was. The girl replied, "I'm drawing God." The teacher paused and said, "But no one knows what God looks like." Without looking up from her drawing, the girl replied, "They will in a minute."

07-08-2008, 09:38 AM	#14
sleeperlove Sleeper Cars Suck Join Date: Aug 2004 Location: in the dirt Posts: 8,071	Re: Time is counting down. Is your car ready? if michigan was on the way I would. I am heading to Columbus to help jack out. They are just today dropping the engine in their Neon I think __________________ A nursery teacher was observing her classroom of children while they were drawing. She would occasionally walk around to see each child's work. As she got to one little girl who was working diligently, she asked what the drawing was. The girl replied, "I'm drawing God." The teacher paused and said, "But no one knows what God looks like." Without looking up from her drawing, the girl replied, "They will in a minute."

07-09-2008, 06:14 PM	#15
BadIdea Senior TEAM Member Join Date: Nov 2003 Location: Cleveland Posts: 2,237	Re: Time is counting down. Is your car ready? I think I have a bad TPS. Car's running like dung. __________________ '02 silver svt, sunroof (for sale), stereo (gone)

07-12-2008, 01:18 PM	#17
K STYLEZ Premier Sponsor Join Date: Apr 2003 Location: Chi-town, IL Posts: 2,290	Re: Time is counting down. Is your car ready? I had an odd sound I "thought" was something loose in the suspension... It was a FREAKIN BOLT in the damn bell housing getting beat around like a damn pin ball!!! It only happened on certain turns though... Punished the pressure plate pretty damn good, but I think its still usable, just not quite as pretty... I couldnt make it out folks... __________________ Never interrupt your opponent while he's making a mistake. JOIN US AT CRUISE JAM 3 - SATURDAY AUGUST 30TH - SPRING GROVE, IL www.massivespeedsystem.com -The Midwest's Focus Power Source-

07-12-2008, 08:10 PM	#18
guitarseth Senior TEAM Member Join Date: Mar 2002 Location: Wooster, OH Posts: 2,927	Re: Time is counting down. Is your car ready? We missed you Karl. I was wondering if you were going to show up. I have pictures from today, but I'll probably upload them tomorrow morning. I'm beat and have to be at work by 6 again. __________________ French Blue 2003 ZX3 Power Premium MTX Mild Naturally Aspirated build - Modded for driving enjoyment My Car Please help me with my engine build, buy my engine parts.

07-14-2008, 01:28 PM	#19
K STYLEZ Premier Sponsor Join Date: Apr 2003 Location: Chi-town, IL Posts: 2,290	Re: Time is counting down. Is your car ready? Yeah... I feel like such a hoser not being there... Made alot of plans I had to break. And spent alot of time running around like a mad man trying to make it... DAMN! __________________ Never interrupt your opponent while he's making a mistake. JOIN US AT CRUISE JAM 3 - SATURDAY AUGUST 30TH - SPRING GROVE, IL www.massivespeedsystem.com -The Midwest's Focus Power Source-

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode