Nitrous Solenoid Bracket.

[67GoatPimp]

Could somebody please make a nitrous solenoid bracket for our cars? Something that holds them on the motor and looks halfway decent. A spot that would work for SVTs and non-SVTs alike would obviously be ideal. There just isn't a good place to mount them and I am sick of mine looking like crap, though I don't have the means to make my own.

[shiftycapone]

its bad enough you cross posted this in like 4 different places but you could have at least changed the post a little bit to spice it up.

this is not the way to get something like this done

[67GoatPimp]

It'll never get done regardless. Most of the focus guys are too much of a pussy to run nitrous anyway so there is no demand.

[shiftycapone]

Because it takes a real man to run nitrous??

[Tobyboom]

Originally Posted by shiftycapone

Because it takes a real man to run nitrous??

Meaning what? You aren't man enough or smart enough to run/tune it properly? You build a Focus however you want, and I'll bet you I could build one to run nitrous and outrun you all day long.

[orangeZXT]

teh n20 is the bomb when tuned right it will jump a turbo car all day

[shiftycapone]

Originally Posted by Tobyboom

Meaning what? You aren't man enough or smart enough to run/tune it properly? You build a Focus however you want, and I'll bet you I could build one to run nitrous and outrun you all day long.

Are you saying that to me?
I was refering to him making a blanket reference that all the focus guys are to pussy to run nitrous, not saying anything negative about nitrous.
and please leave me out of the e-racing nowhere did i say anything about my car being fast i was responding to an ignorant remark made by someone other than yourself.

[orangeZXT]

could use the bracket from the saleen n2o focus its a very nice lookn part maybe steve could get it for u

this ones not in good shape it was at a junk yard but u get the idea

[67GoatPimp]

Great idea, does anyone else have a pic of this?

[Honda Hunter]

I have yet to see a nitrous kit that doesn't include solonoid mounting brackets.

It's really quite pointless to make such a simple bracket "vehicle specific". Just use the suplied hardware, and attatch the bracket to any bolt/screw you like.

[67GoatPimp]

There is a point actually. It's called a clean installation. Nitrous **** haphazardly installed does not look clean.

Something like this makes for a much nicer looking installation. I'll hopefully attempt to make one myself soon, but it'd be nice to have someone step up and make one.

[Honda Hunter]

I guess you don't understand what I typed. I'd recomend re-reading my post.

The above pictured solonoid set up comes with those two solonoids, and a universal mounting bracket. It's not "vehicle specific" like your asking for in any way.

What nitrous kit are you using?

[67GoatPimp]

First off, I understood perfectly. Second, That is vehicle specific, it goes on an LS1 throttle body (see link), and does not come with the solenoids, though the bracket can be substituted in for the junk ones that normaly come with the kit for a price. And third, the brackets that come with any kit suck.
Thanks for knowing everything.

http://www.harrisspeedworks.com/shop...cat=372&page=1

And I'm running zex direct port setup.

[67GoatPimp]

I just went the easy route and bought the LS1 to go with the brackets i wanted.