TB question - Focaljet

**pocus** · 08-22-2006, 05:31 AM

Alright I was lookingon your web site and saw under your FR intake manifold you should use part number161-M-9926-D462 for the TB. Were is this part. Is it just a ford mustang TB or what? I'm looking at buying a BBK 70mm TB for a ford mustang to bolt up to my FR intake mani if it will fit but I need to know if thats the case.

So is part # 161-M-9926-D462 a ford mustang TB and will a BBK 4.6L TB bolt up to a FR intake mani.

**Honda Hunter** · 08-22-2006, 05:56 PM

The BBK unit's bolt pattern will match, as the FR intake uses the 4.6 bolt pattern, but you will most likely have to modify the throttle linkage hammer to clear the manifold.

I'll check the part number on the Ford TB for you and let you know.

Any other questions about this set up?

**pocus** · 08-23-2006, 01:24 AM

has the FR 70mm TB come out yet? Or how much is that TB that you have the part number listed go for?

I'm just trying to get a 70mm TB that will bolt up to my Intake and work properly.

**pocus** · 08-25-2006, 12:33 AM

just woundering if you found out anything

**larryinfl** · 08-29-2006, 07:47 AM

Hi Pocus,

I would recommend contacting our sales team directly. They would be be able to handle this question.

Thanks,
Larry

08-22-2006, 05:31 AM	#1
pocus Senior TEAM Member Join Date: Sep 2002 Location: Janesville WI Posts: 1,303	TB question Alright I was lookingon your web site and saw under your FR intake manifold you should use part number161-M-9926-D462 for the TB. Were is this part. Is it just a ford mustang TB or what? I'm looking at buying a BBK 70mm TB for a ford mustang to bolt up to my FR intake mani if it will fit but I need to know if thats the case. So is part # 161-M-9926-D462 a ford mustang TB and will a BBK 4.6L TB bolt up to a FR intake mani. __________________ 358whp and 335TQ-23psi-93oct and I can still turn the boost up.

08-22-2006, 05:56 PM	#2
Honda Hunter Senior TEAM Member Join Date: Nov 2001 Location: Fabulous South Florida Posts: 4,847	Re: TB question The BBK unit's bolt pattern will match, as the FR intake uses the 4.6 bolt pattern, but you will most likely have to modify the throttle linkage hammer to clear the manifold. I'll check the part number on the Ford TB for you and let you know. Any other questions about this set up? __________________ -Nick NaRdone

08-23-2006, 01:24 AM	#3
pocus Senior TEAM Member Join Date: Sep 2002 Location: Janesville WI Posts: 1,303	Re: TB question has the FR 70mm TB come out yet? Or how much is that TB that you have the part number listed go for? I'm just trying to get a 70mm TB that will bolt up to my Intake and work properly. __________________ 358whp and 335TQ-23psi-93oct and I can still turn the boost up.

08-25-2006, 12:33 AM	#4
pocus Senior TEAM Member Join Date: Sep 2002 Location: Janesville WI Posts: 1,303	Re: TB question just woundering if you found out anything __________________ 358whp and 335TQ-23psi-93oct and I can still turn the boost up.

08-29-2006, 07:47 AM	#5
larryinfl Premier Sponsor Join Date: Aug 2005 Location: Boca Raton, Florida Posts: 382	Re: TB question Hi Pocus, I would recommend contacting our sales team directly. They would be be able to handle this question. Thanks, Larry __________________ Steeda Autosports Webmaster :-) Steeda Focus Goodness: http://www.steedafocus.com Steeda Phone Number: 954-960-0774

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode