Stewart Warner Ultra-shift lights - Focaljet

**Mjasinski** · 07-21-2007, 07:02 AM

anyone know what is the process for installing this? http://www.steedafocus.com/store/Accessories-Stewart-Warner-Shift-Lights/c22_226/p558/Stewart-Warner-Ultra-Shift-Lights-(Blue)---'79-'04/product_info.html

what i like is the digi tach more then anything.

**larryinfl** · 07-30-2007, 01:14 PM

I had to ask someone this question. This is the answer I was told:

"He would basically need a tach signal adapter to wire into the car, then the shift light would wire to the tach adapter."

I hope this helps.

**Terrible1** · 10-26-2007, 05:16 PM

I use to have one of these. Just tap in to a hot and ground wire ( I tapped mine into wires in the headlight switch ) and then run the signal wire to pin# 48 on the ECU main harness

Easy as pie

**SVTF** · 12-26-2007, 05:58 PM

I've got one mounted in a pillar gauge pod and love it, I bought a tach driver when I installed mine last year sometime and it wasn't hard. At the time I didn't know about getting the signal from the ecu, but my ford racing tach driver does the trick.

**Mjasinski** · 12-27-2007, 01:42 AM

cool...and its digital gives an accurate read out? of rpm?

**SVTF** · 12-27-2007, 08:13 AM

There are a few different settings within the gauge that interprets the crank position sensor signal differently if it was on a different motor (v6, v10, etc). If you just flip through them (theres maybe 4 or 5) its obvious which is correct because the rpm's are way off for the other choices.

They also have like 3 brightness levels and you can turn off the numerical display and just use it as a shift light if you like, and btw the shift light is bright.

**tallguy2.3** · 12-28-2007, 12:37 AM

Yes I have one too and its probably something like 5 different brightness adjustments from noticeable to blinding. Mine is on blinding. I LOVE it.

07-21-2007, 07:02 AM	#1
Mjasinski Senior TEAM Member Join Date: Jan 2005 Location: Saint Paul, MN Posts: 1,470	Stewart Warner Ultra-shift lights anyone know what is the process for installing this? http://www.steedafocus.com/store/Accessories-Stewart-Warner-Shift-Lights/c22_226/p558/Stewart-Warner-Ultra-Shift-Lights-(Blue)---'79-'04/product_info.html what i like is the digi tach more then anything. __________________ 2000 Autumn Orange ZX3 "Op Orange" 2000 CD Silver ZX3 "Bullet" the beater My Space

07-30-2007, 01:14 PM	#2
larryinfl Premier Sponsor Join Date: Aug 2005 Location: Boca Raton, Florida Posts: 382	Re: Stewart Warner Ultra-shift lights I had to ask someone this question. This is the answer I was told: "He would basically need a tach signal adapter to wire into the car, then the shift light would wire to the tach adapter." I hope this helps. __________________ Steeda Autosports Webmaster :-) Steeda Focus Goodness: http://www.steedafocus.com Steeda Phone Number: 954-960-0774

10-26-2007, 05:16 PM	#3
Terrible1 Senior TEAM Member Join Date: Oct 2004 Location: Idaho Falls, Idaho Posts: 1,962	Re: Stewart Warner Ultra-shift lights I use to have one of these. Just tap in to a hot and ground wire ( I tapped mine into wires in the headlight switch ) and then run the signal wire to pin# 48 on the ECU main harness Easy as pie __________________ ENGINE- Powerworks, Kamikaze header, 2.25 SS exhaust, Odyssey 680 in cab, Mocal oil cooler, Torsen, 4.06 FD, ClutchNet race clutch, Fidanza SUSPENSION/WHEELS- Custom H&R Coilovers, FS camber plates, Eibach sway bars, Rota Slips w/Toyo R888 225-50-16, SVT brakes w/Hawk race pads, ARP studs, Custom wheel spacers EXTERIOR- Euro grills, Deft' CF hood, Sparco hood pins, CF F1 mirrors, CF sunroof delete, Custom front airdam/splitter INTERIOR- Custom spec cage, RS shift knob, FC SS, Corbeau Fx1, Momo Mod78, NRG quick release, Defi gauges, Crow 5point SPONSORS- Troys Engine Mfg., Casper Customs, Striknine Motorsports, Bleeding Cowboy Tattoo

12-26-2007, 05:58 PM	#4
SVTF Junior Member Join Date: Jul 2005 Location: York, PA Posts: 86	Re: Stewart Warner Ultra-shift lights I've got one mounted in a pillar gauge pod and love it, I bought a tach driver when I installed mine last year sometime and it wasn't hard. At the time I didn't know about getting the signal from the ecu, but my ford racing tach driver does the trick. __________________ 03' ZX5 SVTF #2020 <---click

12-27-2007, 01:42 AM	#5
Mjasinski Senior TEAM Member Join Date: Jan 2005 Location: Saint Paul, MN Posts: 1,470	Re: Stewart Warner Ultra-shift lights cool...and its digital gives an accurate read out? of rpm? __________________ 2000 Autumn Orange ZX3 "Op Orange" 2000 CD Silver ZX3 "Bullet" the beater My Space

12-27-2007, 08:13 AM	#6
SVTF Junior Member Join Date: Jul 2005 Location: York, PA Posts: 86	Re: Stewart Warner Ultra-shift lights There are a few different settings within the gauge that interprets the crank position sensor signal differently if it was on a different motor (v6, v10, etc). If you just flip through them (theres maybe 4 or 5) its obvious which is correct because the rpm's are way off for the other choices. They also have like 3 brightness levels and you can turn off the numerical display and just use it as a shift light if you like, and btw the shift light is bright. __________________ 03' ZX5 SVTF #2020 <---click

12-28-2007, 12:37 AM	#7
tallguy2.3 [FJ] Specialist Join Date: Apr 2006 Location: AZ Posts: 5,887	Re: Stewart Warner Ultra-shift lights Yes I have one too and its probably something like 5 different brightness adjustments from noticeable to blinding. Mine is on blinding. I LOVE it. __________________ Selling spare parts to pay for college....and installing the ones I really like. 05 ST- Blown motor. Mike and Ben saved my car's life....and my financial future for the next 5-10years.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode