New springs - Focaljet

**decepticon** · 07-06-2008, 04:34 AM

When installing new springs, how can I tell which end of the new spring is the top and which end is the bottom? I dont want to install them upside down. Also installing new shocks and dampers. But those are easier to figure out. Thanks!

**zetecer** · 07-06-2008, 07:49 AM

not sure but the fronts tapper at the top of the spring and both front and back have a notch on the perch so that it sits right

hope this helps!! good luck and lets see pics after!!!

**decepticon** · 07-06-2008, 06:18 PM

That actually does help...and once it gets installed and settles and my new tires are mounted, I will definitely post pics!

**sayin0487** · 07-10-2008, 07:16 AM

I'm not sure what brand suspension you have, but I installed mine yesterday, and I just made sure the lettering on them was up.

**decepticon** · 07-10-2008, 07:15 PM

It's the full ST SportTech kit...shocks, dampers and the whole nine. My springs don't have much in the way of letters, though. I just checked them. I can't put them on until later in the month anyway. Gotta drive to CO on Saturday.

07-06-2008, 04:34 AM	#1
decepticon TEAM Member Join Date: May 2007 Posts: 160	New springs When installing new springs, how can I tell which end of the new spring is the top and which end is the bottom? I dont want to install them upside down. Also installing new shocks and dampers. But those are easier to figure out. Thanks! __________________ 2005 ZX3, svt 5-spokes, Steeda SRI, F2 short shifter, MBRP 2.25 exhaust, ST SportTech suspension, all Kenwood system, if I had a woman I would have a car that was COMPLETELY STOCK. Continuous Hits!! Mid-days from 10-3 on 94.3 F.M. KYEE!!

07-06-2008, 07:49 AM	#2
zetecer TEAM Member Join Date: Nov 2007 Location: fall river, ma Posts: 195	Re: New springs not sure but the fronts tapper at the top of the spring and both front and back have a notch on the perch so that it sits right hope this helps!! good luck and lets see pics after!!!

07-06-2008, 06:18 PM	#3
decepticon TEAM Member Join Date: May 2007 Posts: 160	Re: New springs That actually does help...and once it gets installed and settles and my new tires are mounted, I will definitely post pics! __________________ 2005 ZX3, svt 5-spokes, Steeda SRI, F2 short shifter, MBRP 2.25 exhaust, ST SportTech suspension, all Kenwood system, if I had a woman I would have a car that was COMPLETELY STOCK. Continuous Hits!! Mid-days from 10-3 on 94.3 F.M. KYEE!!

07-10-2008, 07:16 AM	#4
sayin0487 TEAM Member Join Date: Aug 2007 Location: Titusville, Fl Posts: 790	Re: New springs I'm not sure what brand suspension you have, but I installed mine yesterday, and I just made sure the lettering on them was up. __________________ 07 CD Silver ST with SAP, 2.5" Trubendz exhaust, FS Cool-flo intake, COSWORTH BSD, OBX header, CFM Dogbone mount, CFM 67mm throttle body, CFM STS, Eibach Pro-Kit, 93 octane tune thanks to focussport and the XCAL2 159whp/151wtq 15.431 @ 89.28 mph 1/4 mile -George-

07-10-2008, 07:15 PM	#5
decepticon TEAM Member Join Date: May 2007 Posts: 160	Re: New springs It's the full ST SportTech kit...shocks, dampers and the whole nine. My springs don't have much in the way of letters, though. I just checked them. I can't put them on until later in the month anyway. Gotta drive to CO on Saturday. __________________ 2005 ZX3, svt 5-spokes, Steeda SRI, F2 short shifter, MBRP 2.25 exhaust, ST SportTech suspension, all Kenwood system, if I had a woman I would have a car that was COMPLETELY STOCK. Continuous Hits!! Mid-days from 10-3 on 94.3 F.M. KYEE!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode