costum intake ideas - Focaljet

**the devil himself** · 08-19-2006, 08:27 PM

i want to make my my own custom intake set up.i had the aem cai,but after the roads flodded ,i replaced it with the std ram air for the svt.i want the filter to sit far enough away from the engine as possible without the risk of of hydrolocking.i could possibly come up with something on my own, but if you guys have any ideas please let me know

**LamarWH** · 08-20-2006, 02:21 PM

better off getting the focus sport cool-flo intake. oh and you should get the ORP, its not like you get smog tested everyday. just put the catalytic converter on when you actually do need to get tested.

**HTPerformance** · 08-20-2006, 05:32 PM

Cosmo racing std ZX3 intake chopped 3" in the midsection and an inch at the end.

**LamarWH** · 08-20-2006, 07:22 PM

pulling hot air from the top of the engine compartment right next to the header? dunno about that setup man.
For the valve cover breather, put a mini air cleaner on that hose, you can do the same for the bung on the intake pipe or just cap it with a 3/8" bolt.

**HTPerformance** · 08-20-2006, 07:40 PM

Works better than the stock setup. I am making a heat shield for it anyways.

08-19-2006, 08:27 PM	#1
the devil himself Rookie Join Date: Aug 2006 Location: jacksonville nc(for now) Posts: 28	costum intake ideas i want to make my my own custom intake set up.i had the aem cai,but after the roads flodded ,i replaced it with the std ram air for the svt.i want the filter to sit far enough away from the engine as possible without the risk of of hydrolocking.i could possibly come up with something on my own, but if you guys have any ideas please let me know __________________ steeda 65mm TB,steeda intake,msd coil pack,msd 8.5mm wires,iridium plugs,fs udp,predator tune,borla catback,eibach pro kit (springs,dampers)steeda short shifter,i would get the off road pipe,but emission laws in nc are a b@#$t

08-20-2006, 02:21 PM	#2
LamarWH Senior TEAM Member Join Date: Dec 2002 Location: Bay Area, CA Posts: 1,580	Re: costum intake ideas better off getting the focus sport cool-flo intake. oh and you should get the ORP, its not like you get smog tested everyday. just put the catalytic converter on when you actually do need to get tested.

08-20-2006, 05:32 PM	#3
HTPerformance TEAM Sponsor Join Date: Apr 2005 Location: Boston, MA Posts: 1,467	Re: costum intake ideas Cosmo racing std ZX3 intake chopped 3" in the midsection and an inch at the end. __________________ *"Enabling you the opportunity to build your DREAM. We take ideas and turn them into reality."* BUY IT NOW! HTP Adjustable Rear Toe Arms - ORDER YOUR SET NOW! Zetec MAF Sensor Tubes now in stock! Duratec on the way!

08-20-2006, 07:22 PM	#4
LamarWH Senior TEAM Member Join Date: Dec 2002 Location: Bay Area, CA Posts: 1,580	Re: costum intake ideas pulling hot air from the top of the engine compartment right next to the header? dunno about that setup man. For the valve cover breather, put a mini air cleaner on that hose, you can do the same for the bung on the intake pipe or just cap it with a 3/8" bolt.

08-20-2006, 07:40 PM	#5
HTPerformance TEAM Sponsor Join Date: Apr 2005 Location: Boston, MA Posts: 1,467	Re: costum intake ideas Works better than the stock setup. I am making a heat shield for it anyways. __________________ *"Enabling you the opportunity to build your DREAM. We take ideas and turn them into reality."* BUY IT NOW! HTP Adjustable Rear Toe Arms - ORDER YOUR SET NOW! Zetec MAF Sensor Tubes now in stock! Duratec on the way!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode