my new pile of sheet metal. (project RoRo Revive) - Page 5 - Focaljet

**boostedzx3** · 03-16-2008, 04:13 PM

^ahh good call!

**1svt4u2c** · 03-16-2008, 09:48 PM

Hmm, For some reason, that front bumper looks like it needs to be smooth, like this....

http://gallery.fosho.org/albums/focu...l_PDR_1589.JPG

But I'd make it completely smooth, go over the plate area as well. I think that would look hot!

-Matt

**TXFO** · 03-16-2008, 10:04 PM

the body will all be taken care of after it drives. I only put the initial attention on the body so it dosent look like a big pile of junk behind my buddy's shop. I plan on cleaning up the bumper even more, prepping the car inside and out, and having it painted flat black on the outside and something TBA on the inside.

Truthfully I'd like to have the euro front bumper and possibly an SVT rear bumper but right now its more important to me to get this heap back on the road and do it as economically as possible. (seriously, everyone that has or is donating parts, you guys are the best.

)

all in good time.

**zetecgt** · 03-17-2008, 08:18 AM

Quote:

Originally Posted by 1svt4u2c

Hmm, For some reason, that front bumper looks like it needs to be smooth, like this....

http://gallery.fosho.org/albums/focu...l_PDR_1589.JPG

But I'd make it completely smooth, go over the plate area as well. I think that would look hot!

-Matt

I would agree with this. I've always wanted to do that to my bumper, but now that it's on this car...I'd love even more to see Patrick do this to my bumper...

dave.

**boosted2nr** · 03-17-2008, 10:23 AM

Quote:

Originally Posted by TXFO

I figure beer power ought to be good for another 75hp in small bursts. I'll use the 12 oz sneaky petes for the daily but Ive made provisions for the larger 32oz bottles for extended track use.

Forget that, you need some 40oz (pronounced fo-ty) power!

**1svt4u2c** · 03-17-2008, 11:41 AM

Quote:

Originally Posted by zetecgt

I would agree with this. I've always wanted to do that to my bumper, but now that it's on this car...I'd love even more to see Patrick do this to my bumper...

dave.

Thats the spirit! Come on Patrick, You know you wanna do it!!!! (peer pressure sucks sometimes, doesnt it?) I'm tellin you, it would look good!

-Matt

**Johnny_P** · 03-17-2008, 11:08 PM

sorry TXFO, I looked for the mount when I went home, and turns out it got tossed a little while back....

looks like my parents were cleaning out the garage

**TXFO** · 03-18-2008, 12:43 PM

thats ok man, much appreciated anyway.

**orangeZXT** · 03-18-2008, 04:54 PM

looking good man Joe if u think its looks good now u should have seen it when i had all the guts in it

the seats that where in that car where in GREAT shape Nick has the fronts now im glad its coming along good Patrick

**Ledoux289** · 03-18-2008, 04:58 PM

Patrick I've still got that non armrest center console for you if you want it. I've also got what I think is a great idea on some motor mounts if you still need some. You could buy me the VF motor mounts and I'll give you my stock ones. What do you think brother?

-Dillon

**focusownerskid** · 03-18-2008, 05:00 PM

Quote:

Originally Posted by Ledoux289

Patrick I've still got that non armrest center console for you if you want it. I've also got what I think is a great idea on some motor mounts if you still need some. You could buy me the VF motor mounts and I'll give you my stock ones. What do you think brother?

-Dillon

This car requires solid mounts.

- Drew

**TXFO** · 03-18-2008, 06:35 PM

Quote:

Originally Posted by orangeZXT

looking good man Joe if u think its looks good now u should have seen it when i had all the guts in it

the seats that where in that car where in GREAT shape Nick has the fronts now im glad its coming along good Patrick

coming along awesome! I just bought 5 more parts for it last night.

center tit with all switches
black long tube CAI
SVT coolant bottle with black cover
SVT to Zetec ORP
clear corners

Im on a buying spree, yipee!!!!!

my new shop is awesome, I got a raise and my hours went up from about 40 to about 60 per week. plus its right around the corner from my house.

more money for parts!

**1svt4u2c** · 03-18-2008, 11:24 PM

Quote:

Originally Posted by TXFO

coming along awesome! I just bought 5 more parts for it last night.

center tit with all switches
black long tube CAI
SVT coolant bottle with black cover
SVT to Zetec ORP
clear corners

Im on a buying spree, yipee!!!!!

my new shop is awesome, I got a raise and my hours went up from about 40 to about 60 per week. plus its right around the corner from my house.

more money for parts!

Do what?

-Matt

**cjmartinyzx3** · 03-19-2008, 09:43 AM

Patrick, do you need the fogs? i think i have a set of stock fogs laying around here somewhere.

**TXFO** · 03-19-2008, 12:25 PM

yes! need fogs, PM sent!

The center tit! you know, the black lopsided boob that holds the radio and HVAC controls.

**zetecgt** · 03-19-2008, 12:26 PM

*cough*youmeanthestereobezel*cough*

does it have the emergency flash button on it? I need one!

dave.

**TXFO** · 03-19-2008, 12:27 PM

yes it does. The hatch already has one so Ill sell you this one for ONE MILLION DOLLARS!!!!

nah, you can have it.

**1svt4u2c** · 03-19-2008, 02:48 PM

^

Never looked at it that way. The middle boob!

-Matt

**zetecgt** · 03-19-2008, 03:10 PM

Quote:

Originally Posted by TXFO

yes it does. The hatch already has one so Ill sell you this one for ONE MILLION DOLLARS!!!!

nah, you can have it.

Thanks a bunch Patrick!

dave.

**TXFO** · 03-19-2008, 06:25 PM

you think you are getting free stuff but Im about to cash it in on you.

**boostedzx3** · 03-19-2008, 06:33 PM

Dont forget donated parts are a tax write off! Whats a motor mount from Ford cost? 9000 dollars now.

**zetecgt** · 03-19-2008, 09:28 PM

Quote:

Originally Posted by TXFO

you think you are getting free stuff but Im about to cash it in on you.

I told you that I don't swing that way.....and I don't drink so no, you can't get me drunk and take advantage of me....

dave.

**COSitsWORTHit** · 03-20-2008, 09:12 AM

Quote:

Originally Posted by focusownerskid

No way.

That is uber cool.

License plate =

REVIVAL

- Drew

x2

03-16-2008, 04:13 PM	#101
boostedzx3 Senior TEAM Member Join Date: Aug 2004 Location: Enola, PA Posts: 4,282	Re: my new pile of sheet metal. (project RoRo Revive) ^ahh good call! __________________ Project s10 daily driver---is done thanks for the feedback! http://forums.focaljet.com/team-rigz...storation.html Project 351 swap in teh mustang--updated 6/15- 351 is in and done http://forums.focaljet.com/team-rigz...ml#post6540928

03-16-2008, 09:48 PM	#102
1svt4u2c Senior TEAM Member Join Date: Jun 2004 Location: York, PA Posts: 1,335	Re: my new pile of sheet metal. (project RoRo Revive) Hmm, For some reason, that front bumper looks like it needs to be smooth, like this.... http://gallery.fosho.org/albums/focu...l_PDR_1589.JPG But I'd make it completely smooth, go over the plate area as well. I think that would look hot! -Matt __________________ 2003 Infra Red SVT #2940 of 3985 AEM SRI, CFM 67mm TB, FC Pulley's, ORP - MIL, Magnaflow Exhaust, VF Rear Engine Mount, FC STS, SCT II [Ray@McNews Tune], Weighted Shift Knob, Slotted and Drilled R1 Rotors, Removed Rear Seats, Competition Stage II Clutch, Spec Flywheel, Torsen LSD and Black TYC Tails

03-16-2008, 10:04 PM	#103
TXFO Moderator Join Date: Jul 2002 Location: My sweet insanity Posts: 12,839	Re: my new pile of sheet metal. (project RoRo Revive) the body will all be taken care of after it drives. I only put the initial attention on the body so it dosent look like a big pile of junk behind my buddy's shop. I plan on cleaning up the bumper even more, prepping the car inside and out, and having it painted flat black on the outside and something TBA on the inside. Truthfully I'd like to have the euro front bumper and possibly an SVT rear bumper but right now its more important to me to get this heap back on the road and do it as economically as possible. (seriously, everyone that has or is donating parts, you guys are the best. ) all in good time. __________________ German and Italian car tech. "Don't tell me, tell my Ghost. Because I blame him for all I don't want to know."

03-17-2008, 11:08 PM	#107
Johnny_P Senior TEAM Member Join Date: Nov 2004 Location: Philly, PA Posts: 4,367	Re: my new pile of sheet metal. (project RoRo Revive) sorry TXFO, I looked for the mount when I went home, and turns out it got tossed a little while back.... looks like my parents were cleaning out the garage __________________ Do you..... Focus? Douche pickle.... ROFL

03-18-2008, 12:43 PM	#108
TXFO Moderator Join Date: Jul 2002 Location: My sweet insanity Posts: 12,839	Re: my new pile of sheet metal. (project RoRo Revive) thats ok man, much appreciated anyway. __________________ German and Italian car tech. "Don't tell me, tell my Ghost. Because I blame him for all I don't want to know."

03-18-2008, 04:54 PM	#109
orangeZXT Moderator Join Date: Feb 2003 Location: for sale forum Posts: 8,118	Re: my new pile of sheet metal. (project RoRo Revive) looking good man Joe if u think its looks good now u should have seen it when i had all the guts in it the seats that where in that car where in GREAT shape Nick has the fronts now im glad its coming along good Patrick __________________ [FJ] check out im new project hit ALT + F4 to view the pics -There is a fine line between "HOBBY" and MENTAL ILLNESS"- [FJ] "more psi than your tires"[FJ]

03-18-2008, 04:58 PM	#110
Ledoux289 TEAM Member Join Date: Apr 2005 Location: San Antonio, TX Posts: 109	Re: my new pile of sheet metal. (project RoRo Revive) Patrick I've still got that non armrest center console for you if you want it. I've also got what I think is a great idea on some motor mounts if you still need some. You could buy me the VF motor mounts and I'll give you my stock ones. What do you think brother? -Dillon __________________ http://www.focsa.org Ford Owners Club of San Antonio

03-19-2008, 09:43 AM	#114
cjmartinyzx3 Senior TEAM Member Join Date: May 2005 Location: Marysville, MI Posts: 2,997	Re: my new pile of sheet metal. (project RoRo Revive) Patrick, do you need the fogs? i think i have a set of stock fogs laying around here somewhere. __________________ Proud member of the 140k+ mile club Soon to come.... SMS Performance and Fabrication. 50 trim T3/T4 = FUN

03-19-2008, 12:25 PM	#115
TXFO Moderator Join Date: Jul 2002 Location: My sweet insanity Posts: 12,839	Re: my new pile of sheet metal. (project RoRo Revive) yes! need fogs, PM sent! The center tit! you know, the black lopsided boob that holds the radio and HVAC controls. __________________ German and Italian car tech. "Don't tell me, tell my Ghost. Because I blame him for all I don't want to know."

03-19-2008, 12:26 PM	#116
zetecgt EXTREME douche pickle! Join Date: Jul 2004 Location: $@N @NT0N10, T3X@$ Posts: 6,991	Re: my new pile of sheet metal. (project RoRo Revive) coughyoumeanthestereobezelcough does it have the emergency flash button on it? I need one! dave. __________________ Ford Owners Club of San Antonio Oh! Don't mind me. I'm just upping my post count..... x p Making people reply with "WTF" since 2004

03-19-2008, 12:27 PM	#117
TXFO Moderator Join Date: Jul 2002 Location: My sweet insanity Posts: 12,839	Re: my new pile of sheet metal. (project RoRo Revive) yes it does. The hatch already has one so Ill sell you this one for ONE MILLION DOLLARS!!!! nah, you can have it. __________________ German and Italian car tech. "Don't tell me, tell my Ghost. Because I blame him for all I don't want to know."

03-19-2008, 02:48 PM	#118
1svt4u2c Senior TEAM Member Join Date: Jun 2004 Location: York, PA Posts: 1,335	Re: my new pile of sheet metal. (project RoRo Revive) ^ Never looked at it that way. The middle boob! -Matt __________________ 2003 Infra Red SVT #2940 of 3985 AEM SRI, CFM 67mm TB, FC Pulley's, ORP - MIL, Magnaflow Exhaust, VF Rear Engine Mount, FC STS, SCT II [Ray@McNews Tune], Weighted Shift Knob, Slotted and Drilled R1 Rotors, Removed Rear Seats, Competition Stage II Clutch, Spec Flywheel, Torsen LSD and Black TYC Tails

03-19-2008, 06:25 PM	#120
TXFO Moderator Join Date: Jul 2002 Location: My sweet insanity Posts: 12,839	Re: my new pile of sheet metal. (project RoRo Revive) you think you are getting free stuff but Im about to cash it in on you. __________________ German and Italian car tech. "Don't tell me, tell my Ghost. Because I blame him for all I don't want to know."

03-19-2008, 06:33 PM	#121
boostedzx3 Senior TEAM Member Join Date: Aug 2004 Location: Enola, PA Posts: 4,282	Re: my new pile of sheet metal. (project RoRo Revive) Dont forget donated parts are a tax write off! Whats a motor mount from Ford cost? 9000 dollars now. __________________ Project s10 daily driver---is done thanks for the feedback! http://forums.focaljet.com/team-rigz...storation.html Project 351 swap in teh mustang--updated 6/15- 351 is in and done http://forums.focaljet.com/team-rigz...ml#post6540928