my new pile of sheet metal. (project RoRo Revive) - Page 3 - Focaljet

**TXFO** · 03-12-2008, 10:07 PM

Quote:

Originally Posted by focusownerskid

It's from an Clifford alarm install and uninstall.

- Drew <- nightmare

so do those wires need to go anywhere?

they look like factory wires that have a home.

**orangeZXT** · 03-12-2008, 10:13 PM

the wires that are cut go to clutch sensor RORO removed them for a remote start.
and i added more parts to the car then when i picked it up from Joe when i got it id didn't have fuel lines,gas tank, some missing harness,not seats at all (not that u got allot

) a head liner (nice hole

) and the dash is new and the gauges i have a steering column if u need it

**orangeZXT** · 03-12-2008, 10:14 PM

i would have got it running but i got a killer deal on a old shool jetters car that had a few parts i needed with it

ohh and hondahunter has the tail lights Joe

**TXFO** · 03-12-2008, 10:22 PM

sweet. But it looks like the clutch switch is there and plugged in.

Im interested in the steering column, the one in the car is sloppy as **** in the intermediate section.

: hit me up with a price.

Ive been lucky. so far a few jetters have come forward and donated parts to the cause.

I am very gratefull to those that have been generous enough to contribute to the cause. I assure you I will find some way to recognize all you have done.

**polarisman14** · 03-12-2008, 10:23 PM

btw I have a handful of stock parts I would donate or sell for cheap so PM me if you need drivetrain parts, rear bumper, etc.

**orangeZXT** · 03-12-2008, 10:25 PM

i looked into the wiring some and im almost 100% sure that the to wires where to the clutch sensor and ill hook u up on the parts u need bro no worries on that

**boostedzx3** · 03-12-2008, 10:30 PM

It will be cool to see if this car gets finished. I've been following it for sometime through a few people now. I'm looking forward to updates, I love these kind of threads.

**zetecgt** · 03-12-2008, 10:34 PM

My god! I hope to see this car up and running soon!

dave.

**TXFO** · 03-12-2008, 10:36 PM

as soon as I get some mounts, the engine and trans will be installed.

**Thameth** · 03-12-2008, 10:38 PM

TXFO, what are you planning for the car? Track beast or full rebuild? Please say truck slut........ otherwise your nuts.

**zetecgt** · 03-12-2008, 10:41 PM

Patrick, I have my stock bumpers that I'd be willing to donate if you need!

dave.

**TXFO** · 03-12-2008, 10:46 PM

you are my HERO!!!!!!!!!!!!!

front bumper is much needed and appreciated!!!!

I was going to offer for sale but I will now trade you, a complete back seat for a black trimmed ZX3. It think yours matches, I dont remember. In any case, the back seat is perfect and it's all yours in exchange for the front bumper.

Yes Thameth. This car will be flogged, beaten, abused, and run to maximum at every opportunity. No restoration in its future. The 4 armloads of stuff I threw in the dumpster is proof of that.

**zetecgt** · 03-12-2008, 11:03 PM

The bumpers are yours then sir! Are you working tomorrow?? I can swing them by around lunch.

.....btw..what all did you throw away? I might need something..

dave.

**focusownerskid** · 03-12-2008, 11:20 PM

This thread = win.

- Drew

**frdfocszx3** · 03-12-2008, 11:39 PM

Good luck with the car Patrick. There's a lot of history behind that car.

**focusdchaos** · 03-13-2008, 12:36 AM

G'luck Patrick...

but my Volvo will still be faster!

**Johnny_P** · 03-13-2008, 12:57 AM

want a stock dogbone mount? i'll donate mine to the cause. let me know.

**LostMyFocus** · 03-13-2008, 10:19 AM

Nice project man! Lookin forward to watching this thread.

**alucardsvt** · 03-13-2008, 10:42 AM

hey if your looking for a SVT front bumper you should ckeck out focusillusions there is a guy there parting out his zx3 and he has a SVT bumper which i think might still be up for sale.

**zetecgt** · 03-13-2008, 12:01 PM

Quote:

Originally Posted by LostMyFocus

Nice project man! Lookin forward to watching this thread.

If he decides to scrap the project, I'll personally kick his ass! This car needs to breathe again!

dave.

**SaxManZX3** · 03-13-2008, 03:28 PM

Quote:

Originally Posted by Majikal

That car and its parts have seen more jetters than mostly any other I can think of. I was SUPPOSED to buy the kami bumper/hood, but that fell through due to a quick sale (to HondaHunter IIRC), .

Actually, it was Rick i think (or maybe rick bought the stuff from Nick) cuz i bought the bumper from Rick. Either way, ya it's gettin around. lol

**orangeZXT** · 03-13-2008, 05:17 PM

the ecu from the car is in the UK

**zetecgt** · 03-13-2008, 06:50 PM

ALRIGHT! I'm now in posession of the "RORO Hatch" back seat and Patrick is in posession of the "zetecgt front bumper"

dave.

**orangeZXT** · 03-13-2008, 08:44 PM

that seats is from a 2002 zx3

not teh RORO ride

its in like new shape isnt it

**TXFO** · 03-13-2008, 09:29 PM

shhh Larry, you are taking away the specialness of it.

delete your damn post before he sees it!

Its ok, dave. It was in RoRo's car therefor it is the RoRo seat.

OK!!!! Time for more updates!!!

Thanks to Zetecgt, the man of the hour, my scrap pile has a bumper!!!!!!!!!

Sorry Larry, I

03-12-2008, 10:13 PM	#52
orangeZXT Moderator Join Date: Feb 2003 Location: for sale forum Posts: 8,194	Re: my new pile of sheet metal. (project RoRo Revive) the wires that are cut go to clutch sensor RORO removed them for a remote start. and i added more parts to the car then when i picked it up from Joe when i got it id didn't have fuel lines,gas tank, some missing harness,not seats at all (not that u got allot ) a head liner (nice hole) and the dash is new and the gauges i have a steering column if u need it __________________ [FJ] check out my new project hit ALT + F4 to view the pics -There is a fine line between "HOBBY" and MENTAL ILLNESS"- [FJ] "more psi than your tires"[FJ]

03-12-2008, 10:14 PM	#53
orangeZXT Moderator Join Date: Feb 2003 Location: for sale forum Posts: 8,194	Re: my new pile of sheet metal. (project RoRo Revive) i would have got it running but i got a killer deal on a old shool jetters car that had a few parts i needed with it ohh and hondahunter has the tail lights Joe __________________ [FJ] check out my new project hit ALT + F4 to view the pics -There is a fine line between "HOBBY" and MENTAL ILLNESS"- [FJ] "more psi than your tires"[FJ]

03-12-2008, 10:22 PM	#54
TXFO Not Special Enough Join Date: Jul 2002 Location: My sweet insanity Posts: 12,963	Re: my new pile of sheet metal. (project RoRo Revive) sweet. But it looks like the clutch switch is there and plugged in. Im interested in the steering column, the one in the car is sloppy as ** in the intermediate section. : hit me up with a price. Ive been lucky. so far a few jetters have come forward and donated parts to the cause. I am very** gratefull to those that have been generous enough to contribute to the cause. I assure you I will find some way to recognize all you have done. __________________ German and Italian car tech. Chloroform Girl - http://www.youtube.com/watch?v=A2r4HE29qSs

03-12-2008, 10:23 PM	#55
polarisman14 Senior TEAM Member Join Date: Aug 2006 Location: Henniker, NH Posts: 3,186	Re: my new pile of sheet metal. (project RoRo Revive) btw I have a handful of stock parts I would donate or sell for cheap so PM me if you need drivetrain parts, rear bumper, etc. __________________ --UnFocused1-- --01 Focus "FCS-PWR" 350+whp Work-In-Progress-- <95 Ranger "SLOWNLO" Project #2: Dropped 4/7, side exit exhaust, audio, etc...> >86 Ninja 250R "GOPED" 50+mpg bullet: Slip-ons, Pod filters, Jet kit, LED signals, custom plate bracket<

03-12-2008, 10:25 PM	#56
orangeZXT Moderator Join Date: Feb 2003 Location: for sale forum Posts: 8,194	Re: my new pile of sheet metal. (project RoRo Revive) i looked into the wiring some and im almost 100% sure that the to wires where to the clutch sensor and ill hook u up on the parts u need bro no worries on that __________________ [FJ] check out my new project hit ALT + F4 to view the pics -There is a fine line between "HOBBY" and MENTAL ILLNESS"- [FJ] "more psi than your tires"[FJ]

03-12-2008, 10:30 PM	#57
boostedzx3 Senior TEAM Member Join Date: Aug 2004 Location: Enola, PA Posts: 4,585	Re: my new pile of sheet metal. (project RoRo Revive) It will be cool to see if this car gets finished. I've been following it for sometime through a few people now. I'm looking forward to updates, I love these kind of threads. __________________ Project s10 daily driver---is done thanks for the feedback! http://forums.focaljet.com/team-rigz...storation.html Project 351 swap in teh mustang--updated 6/15- 351 is in and done http://forums.focaljet.com/team-rigz...ml#post6540928

03-12-2008, 10:34 PM	#58
zetecgt EXTREME douche pickle! Join Date: Jul 2004 Location: $@N @NT0N10, T3X@$ Posts: 7,341	Re: my new pile of sheet metal. (project RoRo Revive) My god! I hope to see this car up and running soon! dave. __________________ Ford Owners Club of San Antonio Oh! Don't mind me. I'm just upping my post count..... x p Making people reply with "WTF" since 2004

03-12-2008, 10:36 PM	#59
TXFO Not Special Enough Join Date: Jul 2002 Location: My sweet insanity Posts: 12,963	Re: my new pile of sheet metal. (project RoRo Revive) as soon as I get some mounts, the engine and trans will be installed. __________________ German and Italian car tech. Chloroform Girl - http://www.youtube.com/watch?v=A2r4HE29qSs

03-12-2008, 10:38 PM	#60
Thameth Administrator Join Date: Aug 2000 Location: North Miami Beach, FL USA Posts: 37,660	Re: my new pile of sheet metal. (project RoRo Revive) TXFO, what are you planning for the car? Track beast or full rebuild? Please say truck slut........ otherwise your nuts. __________________ www.JosephRegner.com http://twitter.com/JRegner Average gasoline prices around the world The world does not revolve around you, so act like it

03-12-2008, 10:41 PM	#61
zetecgt EXTREME douche pickle! Join Date: Jul 2004 Location: $@N @NT0N10, T3X@$ Posts: 7,341	Re: my new pile of sheet metal. (project RoRo Revive) Patrick, I have my stock bumpers that I'd be willing to donate if you need! dave. __________________ Ford Owners Club of San Antonio Oh! Don't mind me. I'm just upping my post count..... x p Making people reply with "WTF" since 2004

03-12-2008, 10:46 PM	#62
TXFO Not Special Enough Join Date: Jul 2002 Location: My sweet insanity Posts: 12,963	Re: my new pile of sheet metal. (project RoRo Revive) you are my HERO!!!!!!!!!!!!! front bumper is much needed and appreciated!!!! I was going to offer for sale but I will now trade you, a complete back seat for a black trimmed ZX3. It think yours matches, I dont remember. In any case, the back seat is perfect and it's all yours in exchange for the front bumper. Yes Thameth. This car will be flogged, beaten, abused, and run to maximum at every opportunity. No restoration in its future. The 4 armloads of stuff I threw in the dumpster is proof of that. __________________ German and Italian car tech. Chloroform Girl - http://www.youtube.com/watch?v=A2r4HE29qSs

03-12-2008, 11:03 PM	#63
zetecgt EXTREME douche pickle! Join Date: Jul 2004 Location: $@N @NT0N10, T3X@$ Posts: 7,341	Re: my new pile of sheet metal. (project RoRo Revive) The bumpers are yours then sir! Are you working tomorrow?? I can swing them by around lunch. .....btw..what all did you throw away? I might need something.. dave. __________________ Ford Owners Club of San Antonio Oh! Don't mind me. I'm just upping my post count..... x p Making people reply with "WTF" since 2004

03-12-2008, 11:20 PM	#64
focusownerskid Administrator Join Date: Aug 2000 Location: Monroe, MI Posts: 15,477	Re: my new pile of sheet metal. (project RoRo Revive) This thread = win. - Drew __________________ '02.5 SVTF - For Sale; http://forums.focaljet.com/vehicles-...svt-focus.html '01 Turbo ZX3 - For Sale; http://forums.focaljet.com/vehicles-...ml#post6770262 type dRew & friends Motorsports.

03-12-2008, 11:39 PM	#65
frdfocszx3 Senior TEAM Member Join Date: Aug 2000 Location: Hurlburt Field, FL. Posts: 3,597	Re: my new pile of sheet metal. (project RoRo Revive) Good luck with the car Patrick. There's a lot of history behind that car. __________________ RIP Colin

03-13-2008, 12:36 AM	#66
focusdchaos [FJ] Specialist Join Date: Aug 2000 Location: San Antonio, TX Posts: 8,356	Re: my new pile of sheet metal. (project RoRo Revive) G'luck Patrick... but my Volvo will still be faster! __________________ 1.5l of megaquirted Italian goodness. Live Free Or Die; Death Is Not The Worst Of Evils. "Government is not reason; it is not eloquent; it is force. Like fire, it is a dangerous servant and a fearful master. Never for a moment should it be left to irresponsible action." --George Washington

03-13-2008, 10:19 AM	#68
LostMyFocus Junior Member Join Date: May 2007 Location: Upstate NY Posts: 83	Re: my new pile of sheet metal. (project RoRo Revive) Nice project man! Lookin forward to watching this thread. __________________ -Sean-

03-13-2008, 10:42 AM	#69
alucardsvt TEAM Member Join Date: May 2004 Posts: 461	Re: my new pile of sheet metal. (project RoRo Revive) hey if your looking for a SVT front bumper you should ckeck out focusillusions there is a guy there parting out his zx3 and he has a SVT bumper which i think might still be up for sale.

03-13-2008, 05:17 PM	#72
orangeZXT Moderator Join Date: Feb 2003 Location: for sale forum Posts: 8,194	Re: my new pile of sheet metal. (project RoRo Revive) the ecu from the car is in the UK __________________ [FJ] check out my new project hit ALT + F4 to view the pics -There is a fine line between "HOBBY" and MENTAL ILLNESS"- [FJ] "more psi than your tires"[FJ]

03-13-2008, 06:50 PM	#73
zetecgt EXTREME douche pickle! Join Date: Jul 2004 Location: $@N @NT0N10, T3X@$ Posts: 7,341	Re: my new pile of sheet metal. (project RoRo Revive) ALRIGHT! I'm now in posession of the "RORO Hatch" back seat and Patrick is in posession of the "zetecgt front bumper" dave. __________________ Ford Owners Club of San Antonio Oh! Don't mind me. I'm just upping my post count..... x p Making people reply with "WTF" since 2004

03-13-2008, 08:44 PM	#74
orangeZXT Moderator Join Date: Feb 2003 Location: for sale forum Posts: 8,194	Re: my new pile of sheet metal. (project RoRo Revive) that seats is from a 2002 zx3 not teh RORO ride its in like new shape isnt it __________________ [FJ] check out my new project hit ALT + F4 to view the pics -There is a fine line between "HOBBY" and MENTAL ILLNESS"- [FJ] "more psi than your tires"[FJ]

03-13-2008, 09:29 PM	#75
TXFO Not Special Enough Join Date: Jul 2002 Location: My sweet insanity Posts: 12,963	Re: my new pile of sheet metal. (project RoRo Revive) another update!!! shhh Larry, you are taking away the specialness of it. delete your damn post before he sees it! Its ok, dave. It was in RoRo's car therefor it is the RoRo seat. OK!!!! Time for more updates!!! Thanks to Zetecgt, the man of the hour, my scrap pile has a bumper!!!!!!!!! Sorry Larry, I