Plated, started, fabricated, tinted and buffed - Page 2 - Focaljet

**CTZX3** · 09-27-2008, 07:51 PM

Good Work

But the reason its flapping around is that thing is like a parachute
thats why the SVT rear difuser has holes in it. Id ditch it

**05TronZX3** · 09-27-2008, 08:25 PM

Quote:

Originally Posted by method213

Very very nice! How hard is it to install the window tint on the rear window? I been also thinking of doing it myself.

the back windows are a lot easier than the front because they dont move anywhere. what youve gotta do is cut out the window shape on the outside. which helps a lot without the extra film in the way its a lot easier. then just follow the regular tinting techniques and your golden.

its really the front windows that chap peoples ass's

**zetecgt** · 09-27-2008, 09:04 PM

You don't hang out with Steve?

When I get back to NC, I'll be calling you buddy.

dave.

**Spatakula** · 09-27-2008, 10:29 PM

Good. When you comin back?

-spatakula

**Davor** · 09-28-2008, 03:45 AM

Spak, I'd trade my car for yours. Love that stance. Is it a Cup Kit or coilovers?

**1svt4u2c** · 09-28-2008, 05:13 AM

Since no one else said it......

Your knob! It's shiny! I like it.

Lookin good as always.

-Matt

**Spatakula** · 09-28-2008, 03:26 PM

Quote:

Originally Posted by Davor

Spak, I'd trade my car for yours. Love that stance. Is it a Cup Kit or coilovers?

Sure. It is the K&W Variant 1 coilovers.

Quote:

Originally Posted by 1svt4u2c

Since no one else said it......

Your knob! It's shiny! I like it.

Lookin good as always.

-Matt

Yaah that sum bitch gets hot in the summer. You face getting burnt every time you shift into a different gear.

**RhodySVT** · 09-28-2008, 06:23 PM

Awesome looking car man, it's what my Sonic Blue '02 should have been. But you've seen my new toy, should have some fun with that one!

**Spatakula** · 09-28-2008, 08:57 PM

Definatly. So clean. And PWSC to boot!

-spatakula

**zetecgt** · 09-28-2008, 09:02 PM

Quote:

Originally Posted by Spatakula

Good. When you comin back?

-spatakula

I wish I knew an exact date....

dave.

**Spatakula** · 09-28-2008, 10:19 PM

ok. welp shoot me me a PM when you know for sure.

-spatakula

**2focusd** · 09-28-2008, 10:32 PM

Dude, that new plate is teh sexeh

And I may have to steal your engine start button idea this winter once I get my interior project done and get bored

-Brian

**1svt4u2c** · 09-29-2008, 02:28 AM

Quote:

Originally Posted by Spatakula

Yaah that sum bitch gets hot in the summer. You face getting burnt every time you shift into a different gear.

Nice! I have weighted anodized red shift knob, and she gets pretty hot too!

Anyway....she looked sexy when she was up here in PA, and she's still lookin sexy down there in NC. Sux about the plates not being raised up like our good ole PA tags.

: But, with the background, lol, it looks pretty sweet!

-Matt

**Spatakula** · 09-29-2008, 10:16 AM

Quote:

Originally Posted by 1svt4u2c

Nice! I have weighted anodized red shift knob, and she gets pretty hot too!

Anyway....she looked sexy when she was up here in PA, and she's still lookin sexy down there in NC. Sux about the plates not being raised up like our good ole PA tags.

: But, with the background, lol, it looks pretty sweet!

-Matt

Well I think every state is going to have these crappy new plates. Keep your old ones for as long as possible!

-spatakula

**v8FociDreams** · 09-29-2008, 09:00 PM

They must have just started the painted on letters for the license plates. I got my plates in March and they were the raised kind.
What neighborhood is that? That looks really familiar.

**Lifeguardjoe** · 09-29-2008, 09:16 PM

20% is over the top? Needs moar 5%

Overall, A+

**Spatakula** · 09-29-2008, 11:03 PM

Considering there is like tons of cops around you at all times, yeah I would say so.

One thing I noticed about living in NC is that there are soooooo many cops driving around. Freakin rediculious. When my dad looked at the tint he stopped and said " You know you are asking for it with that tint" lol. Thanks mang.

Quote:

Originally Posted by v8FociDreams

They must have just started the painted on letters for the license plates. I got my plates in March and they were the raised kind.
What neighborhood is that? That looks really familiar.

Its right beside the Garner Fire Department on Sauls road. Its called Tavranier.

-spatakula

**Lifeguardjoe** · 09-29-2008, 11:21 PM

Quote:

Originally Posted by Spatakula

Considering there is like tons of cops around you at all times, yeah I would say so.

One thing I noticed about living in NC is that there are soooooo many cops driving around. Freakin rediculious. When my dad looked at the tint he stopped and said " You know you are asking for it with that tint" lol. Thanks mang.

What's funny is the focus has the leagal 30% tint and I've been tested for tint 3 times. The Cobra on the other hand has 15% all around and a THICK strip on the windshield and I've NEVER been pulled over in the two years with it.

**BlackEuroust** · 09-30-2008, 01:00 AM

very very nice

**Spatakula** · 09-30-2008, 02:00 PM

Quote:

Originally Posted by Lifeguardjoe

What's funny is the focus has the leagal 30% tint and I've been tested for tint 3 times. The Cobra on the other hand has 15% all around and a THICK strip on the windshield and I've NEVER been pulled over in the two years with it.

Heh thats funny. I was kind of worried about it when I first did it but at least 75% of the cars here have it.

I guess I should just be on my best behavior and not get a speeding ticket or something so he doesn't test the windows and adds more fines.

-spatakula

**Lifeguardjoe** · 09-30-2008, 04:33 PM

Quote:

Originally Posted by Spatakula

Heh thats funny. I was kind of worried about it when I first did it but at least 75% of the cars here have it.

I guess I should just be on my best behavior and not get a speeding ticket or something so he doesn't test the windows and adds more fines.

-spatakula

If you do get pulled over, just put the front windows all they way down. You don't have to roll them up. Well, that's how FL law is. Although the fofos tint is legal and I've never had a problem with it, but sooner or later I'm going 15% on front windows and 5% for the rest

**slidemaster** · 09-30-2008, 05:26 PM

Quote:

Originally Posted by stilix

great looking car

X2 I have always thought the SVT was very nice and your is a bit edgy which is pretty cool

09-27-2008, 07:51 PM	#26
CTZX3 [FJ] Specialist Join Date: Aug 2000 Location: FJ Member #93 PerryHall, Maryland Posts: 7,146	Re: Plated, started, fabricated, tinted and buffed Good Work But the reason its flapping around is that thing is like a parachute thats why the SVT rear difuser has holes in it. Id ditch it __________________ WWW.CHRIS13.COM FLICKR 2004 White ZX3 2.3L Powered by Duratec

09-27-2008, 09:04 PM	#28
zetecgt EXTREME douche pickle! Join Date: Jul 2004 Location: $@N @NT0N10, T3X@$ Posts: 7,332	Re: Plated, started, fabricated, tinted and buffed You don't hang out with Steve? When I get back to NC, I'll be calling you buddy. dave. __________________ Ford Owners Club of San Antonio Oh! Don't mind me. I'm just upping my post count..... x p Making people reply with "WTF" since 2004

09-27-2008, 10:29 PM	#29
Spatakula cUsToM tItLe - You're Welcome. - Drew Join Date: Jul 2005 Location: Raleigh, NC Posts: 7,981	Re: Plated, started, fabricated, tinted and buffed Good. When you comin back? -spatakula __________________ 2002 SVTF #602

09-28-2008, 03:45 AM	#30
Davor TEAM Member Join Date: Oct 2002 Location: Washington State Posts: 953	Re: Plated, started, fabricated, tinted and buffed Spak, I'd trade my car for yours. Love that stance. Is it a Cup Kit or coilovers? __________________ PRJcT 3uro( Y )heel( Y )hore

09-28-2008, 05:13 AM	#31
1svt4u2c Senior TEAM Member Join Date: Jun 2004 Location: York, PA Posts: 1,594	Re: Plated, started, fabricated, tinted and buffed Since no one else said it...... Your knob! It's shiny! I like it. Lookin good as always. -Matt __________________ 2003 Infra Red SVT #2940 of 3985 AEM SRI, CFM 67mm TB, FC Pulley's, ORP - MIL, Magnaflow Exhaust, VF Rear Engine Mount, FC STS, SCT II [Ray@McNews Tune], Weighted Shift Knob, Slotted and Drilled R1 Rotors, Removed Rear Seats, Competition Stage II Clutch, Spec Flywheel, Torsen LSD and Black TYC Tails

09-28-2008, 06:23 PM	#33
RhodySVT TEAM Member Join Date: Jun 2007 Location: Groton, CT Posts: 189	Re: Plated, started, fabricated, tinted and buffed Awesome looking car man, it's what my Sonic Blue '02 should have been. But you've seen my new toy, should have some fun with that one! __________________ 2004 CD Silver SVT ZX5 Euro #1062 of 1079 PowerWorks @ 10psi::234whp 190wtq VF lower mount::Ford Racing STS/Wires .......................much much more to come

09-28-2008, 08:57 PM	#34
Spatakula cUsToM tItLe - You're Welcome. - Drew Join Date: Jul 2005 Location: Raleigh, NC Posts: 7,981	Re: Plated, started, fabricated, tinted and buffed Definatly. So clean. And PWSC to boot! -spatakula __________________ 2002 SVTF #602

09-28-2008, 10:19 PM	#36
Spatakula cUsToM tItLe - You're Welcome. - Drew Join Date: Jul 2005 Location: Raleigh, NC Posts: 7,981	Re: Plated, started, fabricated, tinted and buffed ok. welp shoot me me a PM when you know for sure. -spatakula __________________ 2002 SVTF #602

09-28-2008, 10:32 PM	#37
2focusd [FJ] Addict Join Date: Jul 2005 Location: Uniontown, PA Posts: 13,423	Re: Plated, started, fabricated, tinted and buffed Dude, that new plate is teh sexeh And I may have to steal your engine start button idea this winter once I get my interior project done and get bored -Brian __________________ Godspeed, Colin McRae, may you live on forever as the reason countless people fell in love with the Ford Focus (myself included). 1968-2007 http://www.f2focus.com

09-30-2008, 01:00 AM	#44
BlackEuroust TEAM Member Join Date: Sep 2008 Location: Palm Coast, FL Posts: 161	Re: Plated, started, fabricated, tinted and buffed very very nice __________________ 00 Ebony Black Zx3 Got sick of my old screen name so I got a new one I Laugh in the face of emissions, HA HA HA

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode