will euro svt's fit around brembo bbk? - Focaljet

**redzx300** · 10-13-2008, 09:26 AM

Has anyone tried this, and do they fit without a spacer?

thanks

**sleeperlove** · 10-13-2008, 10:18 AM

They absolutely will NOT fit without a significant spacer.

Member Clintb1321 has used the EAP wheels with the brembo BBK and had to use a pretty big spacer for them to just barely clear.

**redzx300** · 10-13-2008, 10:26 AM

much appreciated for the quick response.

Has anyone tried team dynamics pro race 1s?

**brads03zx3** · 10-13-2008, 10:41 AM

Quote:

Originally Posted by sleeperlove

They absolutely will NOT fit without a significant spacer.

Member Clintb1321 has used the EAP wheels with the brembo BBK and had to use a pretty big spacer for them to just barely clear.

Clint has the larger of the Brembo BBK. CrocTease! and a couple others have the smaller kit. I would imagine the smaller kit would probably need a spacer as well. Those calipers are massive.

**redzx300** · 10-13-2008, 11:44 AM

I believe i have the larger of the kits. they are the two piece rotors.
thanks again for reponses.

Has anyone tried team dynamics pro race 1s?

**Z63R** · 10-13-2008, 02:07 PM

Quote:

Has anyone tried team dynamics pro race 1s?

Yes, but only over the large but stock SVT brakes...

**Z63R** · 10-13-2008, 08:54 PM

^ Talking about their 15-inch wheels, too!

**Croc_Tease!** · 10-13-2008, 09:32 PM

Rota SDR 17x7.5 fit with no spacer over your kit. The EAP's require a 15mm spacer.

TD pro race 1 might fit. You might be able to get measurements from hub center to inner spoke to find out if it will clear. Call a distributor.

**thenorm** · 10-16-2008, 07:48 PM

I bet 17" TD PR1 will fit. they have a better shape than rota's to clear calipers (case in point, 15" PR1's will clear SVT brake,s but rotas will not)

**sleeperlove** · 10-17-2008, 12:38 PM

Quote:

Originally Posted by thenorm

I bet 17" TD PR1 will fit. they have a better shape than rota's to clear calipers (case in point, 15" PR1's will clear SVT brake,s but rotas will not)

There is no 15 inch SDR and I doubt the the PR1 spoke is "better than the SDR's as far as brake clearance goes. The SDR is fantastic as far as break clearence it has a TON of room. Also its PROVEN that the SDR clears just fine, not so with the PR1s as far as I know.

Also 15 inch slipstreams will clear the SVT brakes, so I am not sure where you are getting your info.

**cnegron** · 10-21-2008, 11:12 AM

Which rims are you guys typically using with BBK, I've had a horrible time trying to find something that fits and looks OEM. Do the OZ superturismos fit? I have the saleen brembo kit.

**93SHO03SVT** · 10-21-2008, 11:41 PM

Quote:

Originally Posted by Croc_Tease!

Rota SDR 17x7.5 fit with no spacer over your kit. The EAP's require a 15mm spacer.

TD pro race 1 might fit. You might be able to get measurements from hub center to inner spoke to find out if it will clear. Call a distributor.

I also have the 328mm brembo gt kit i currently have 18x7 oz supertorismos that fit with a 5mm spacer.......i am haveing a hell of a time finding some 17's (for auto-x) that will fit over the brakes what is the offset on the rota sdr 17x7.5? and where can i get them?

**Croc_Tease!** · 10-21-2008, 11:47 PM

Quote:

Originally Posted by 93SHO03SVT

I also have the 328mm brembo gt kit i currently have 18x7 oz supertorismos that fit with a 5mm spacer.......i am haveing a hell of a time finding some 17's (for auto-x) that will fit over the brakes what is the offset on the rota sdr 17x7.5? and where can i get them?

45mm, and good luck finding them. They aren't being made anymore (iirc) so best try and get a used set on here.

**sleeperlove** · 10-22-2008, 12:08 AM

Quote:

Originally Posted by 93SHO03SVT

I also have the 328mm brembo gt kit i currently have 18x7 oz supertorismos that fit with a 5mm spacer.......i am haveing a hell of a time finding some 17's (for auto-x) that will fit over the brakes what is the offset on the rota sdr 17x7.5? and where can i get them?

I will have a set of SDRs for sale very shortly. Mine are one of the custom order sets for the focus so no hub bore is correct negating the need for a hub ring like most wheels.

**ClintB1321** · 10-22-2008, 12:24 AM

^ill take them off your hands

jkjk, i dont need a third set

**cnegron** · 10-25-2008, 06:08 AM

Quote:

Originally Posted by 93SHO03SVT

I also have the 328mm brembo gt kit i currently have 18x7 oz supertorismos that fit with a 5mm spacer.......i am haveing a hell of a time finding some 17's (for auto-x) that will fit over the brakes what is the offset on the rota sdr 17x7.5? and where can i get them?

What offset are the Superturismos?

**sydneysky84** · 10-25-2008, 02:36 PM

Quote:

Originally Posted by ClintB1321

^ill take them off your hands

jkjk, i dont need a third set

lol

10-13-2008, 09:26 AM	#1
redzx300 TEAM Member Join Date: May 2006 Location: vermont Posts: 264	will euro svt's fit around brembo bbk? Has anyone tried this, and do they fit without a spacer? thanks __________________ Parts thanks to Steve at MassiveSpeedSystem.com, Tony at Newedgeperformance.com, HondaHunter. Motor Built By Messer Engines in Springfield, Vt

10-13-2008, 10:18 AM	#2
sleeperlove You wouldn't like me when I'm angry. Join Date: Aug 2004 Location: in the dirt Posts: 8,501	Re: will euro svt's fit around brembo bbk? They absolutely will NOT fit without a significant spacer. Member Clintb1321 has used the EAP wheels with the brembo BBK and had to use a pretty big spacer for them to just barely clear. __________________ I'm in ur posts changin ur werdz.

10-13-2008, 10:26 AM	#3
redzx300 TEAM Member Join Date: May 2006 Location: vermont Posts: 264	Re: will euro svt's fit around brembo bbk? much appreciated for the quick response. Has anyone tried team dynamics pro race 1s? __________________ Parts thanks to Steve at MassiveSpeedSystem.com, Tony at Newedgeperformance.com, HondaHunter. Motor Built By Messer Engines in Springfield, Vt

10-13-2008, 11:44 AM	#5
redzx300 TEAM Member Join Date: May 2006 Location: vermont Posts: 264	Re: will euro svt's fit around brembo bbk? I believe i have the larger of the kits. they are the two piece rotors. thanks again for reponses. Has anyone tried team dynamics pro race 1s? __________________ Parts thanks to Steve at MassiveSpeedSystem.com, Tony at Newedgeperformance.com, HondaHunter. Motor Built By Messer Engines in Springfield, Vt

10-13-2008, 08:54 PM	#7
Z63R Official [FJ] Distinguished Advisor Join Date: May 2004 Posts: 20,159	Re: will euro svt's fit around brembo bbk? ^ Talking about their 15-inch wheels, too! __________________ . “Nothing like cad plated steel to impress the ladies." - FocusSportVP 2.3 Duratec ZX3 + some bits + another pic :-)~

10-13-2008, 09:32 PM	#8
Croc_Tease! Senior TEAM Member Join Date: Sep 2003 Location: Culver City, CA Posts: 3,679	Re: will euro svt's fit around brembo bbk? Rota SDR 17x7.5 fit with no spacer over your kit. The EAP's require a 15mm spacer. TD pro race 1 might fit. You might be able to get measurements from hub center to inner spoke to find out if it will clear. Call a distributor. __________________ EVIL ZX3 Buy my Bilstien PSS9. Buy my Receiver.

10-16-2008, 07:48 PM	#9
thenorm TEAM Member Join Date: Mar 2007 Posts: 121	Re: will euro svt's fit around brembo bbk? I bet 17" TD PR1 will fit. they have a better shape than rota's to clear calipers (case in point, 15" PR1's will clear SVT brake,s but rotas will not)

10-21-2008, 11:12 AM	#11
cnegron Rookie Join Date: Jun 2008 Posts: 7	Re: will euro svt's fit around brembo bbk? Which rims are you guys typically using with BBK, I've had a horrible time trying to find something that fits and looks OEM. Do the OZ superturismos fit? I have the saleen brembo kit.

10-22-2008, 12:24 AM	#15
ClintB1321 Senior TEAM Member Join Date: Apr 2006 Location: In the mountain roads of Malibu;) Posts: 3,976	Re: will euro svt's fit around brembo bbk? ^ill take them off your hands jkjk, i dont need a third set __________________ Liquid gray 05 ZX3-2.3 build in the works:) Sonic blue 02 SVT-RIP Classic Red 97 Miata- saving for LS1 awesome:) Boost Camel Racing...cause the bches love BOV's;) JCM Racing #310**

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode