|
|||||||
| The Tire Rack Tires/Wheels/Brakes Forum Performance rubber, wheels and brake upgrades.
Sponsored by: The Tire Rack |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Newbie
Join Date: Oct 2009
Posts: 2
|
hey there. im looking for the focus 17 euro rims new or used. it seems that the price new is so cheap i should go with those. in any event i have a contourt svt. and the offset is the same i'm wondering if the spacing is the same, will they fit well.
|
|
|
|
|
|
#2 (permalink) |
|
Moderator
Join Date: Oct 2001
Location: Waterloo/Toronto/GTA, Ontario, Canada
Posts: 10,227
|
Welcome to FocalJet.
Yes, the SVT Focus rims fit. A friend of mine did the first-gen 5-spoke rims with his Contour. I know some other guys use SVT Focus rims for their track wheels as well.
__________________
Richard - 2002 ZTS | Sangria Red | 434,000+ km...Be Bold, Stay Focused 24-7 Redline Rendezvous | OFOC - Ontario Focus Owners Club | SVTOA-Toronto [FJ] focaljet - Forum Guidelines - Welcome to the Jet - Team Canada - FJ Store - Sponsors - SEARCH |
|
|
|
|
|
#3 (permalink) |
|
I pay 5 dollar!
Join Date: Jul 2006
Location: OR
Posts: 3,294
|
The EAPs are a bit heavy for tracking I think, but they can take a hell of a beating
__________________
2008 Focus coupe - current 2005 Focus ZX5 - gone, but not forgotten "you could walk around with an overpriced slow Mac in a manila folder and be like "Yo, check this out, aww yeah, you didn't think there was a laptop inside but there was!!!""- Ducman |
|
|
|
|
|
#4 (permalink) |
|
Senior TEAM Member
Join Date: Nov 2002
Location: SoCal (High Desert)
Posts: 1,349
|
They're around 20 pounds, which while not lightweight for a 17" wheel, it isn't as bad as some mid-twenty pound wheels designed more for appearance. On the subject of taking a beating, I was also going to mention to the original poster that if you do find a set of used wheels to inspect them carefully. The outer face of the wheel is pretty strong but the unsupported inner lip on the EAP wheels can bend fairly easily. If you found a good deal on used it might be worthwhile if they're in perfect condition, but with the price of new wheels being so reasonable I wouldn't expect much less perfect if it were me.
__________________
Eric H. '04 SVTF (Screaming Yellow/EAP ZX3) - '02 SVTF (CD Silver - Vortech-equipped) '92 Dodge Daytona IROC R/T - '81 & '85 Chevy Citation X-11 - '93 Olds Achieva SCX W41 (x2) plus a Cobalt, a Neon, and a bunch of other stuff... |
|
|
|
|
|
#5 (permalink) |
|
Resident Wheel-Whore
Join Date: Oct 2004
Location: mnfocus.com
Posts: 11,157
|
I had some issues with teh inside lip of the EAP actually breaking. It knocked a 4inch chunk of the inner lip off. It still held air suprisngly...but they were also powdercoated...
__________________
TUNED By FSWerks -- Parts by TOUSLEY Ford ~~BOOST CREW, Bottled Fresh since 2006 ~~ Vacuum Crew, Stirring things up since 2008~~ |
|
|
|
|
|
#6 (permalink) |
|
TEAM Member
Join Date: Jun 2009
Location: wisconsin, germany, iraq
Posts: 147
|
if you order them from CFM they are only like 137 a piece brand new
thats where i got mine!
__________________
rockin an 04 ford focus svt thats sonic blue with AEM cold air intake, CFM 67mm throttle body, BORLA cat back, FocusSport strut tower bar, msd coil pack and wires also rockin a black 2000 zx3 thats stock except for the full obx exhaust catless with a fart can(came with the car bought it for 3k last time home on leave) |
|
|
|
|
|
#7 (permalink) |
|
Newbie
Join Date: Oct 2009
Posts: 2
|
i figured i could just get em new for cheap enough. unless i seen an amazing deal on used. well 20 pounds is prety close to what the stock contours weigh. of course id love some light weight stuff. do you guys have any to reccomend that are light? possibly anything that resembles the euro? thanks for the feedback.
|
|
|
|
|
|
#8 (permalink) |
|
Senior TEAM Member
Join Date: Nov 2002
Location: SoCal (High Desert)
Posts: 1,349
|
OZ has some nice wheels including their Superturismo GT which are on clearance right now at the Tire Rack and are similar in design to the ST170/EAP wheels, but they're still twice as expensive. It's not listed but I also wouldn't be surprised if they weighed a few pounds more. Some of the wheel guys might be able to chime in with some recommendation but there's a lot of knock-off multi-spoke type wheels and you should be able to find something in the 4x108 bolt pattern. Another option you might keep an eye out is if anyone locally is selling some of the stock '09+ wheels that come on the SES sedan and coupes. They're a slightly different finish but still look pretty nice for a factory wheel.
__________________
Eric H. '04 SVTF (Screaming Yellow/EAP ZX3) - '02 SVTF (CD Silver - Vortech-equipped) '92 Dodge Daytona IROC R/T - '81 & '85 Chevy Citation X-11 - '93 Olds Achieva SCX W41 (x2) plus a Cobalt, a Neon, and a bunch of other stuff... |
|
|
|
|
|
#9 (permalink) |
|
TEAM Member
Join Date: Jun 2009
Location: wisconsin, germany, iraq
Posts: 147
|
O.Z. superturismo in any form they look alot like EAP's
i personally like the WRC model white with blue always look good
__________________
rockin an 04 ford focus svt thats sonic blue with AEM cold air intake, CFM 67mm throttle body, BORLA cat back, FocusSport strut tower bar, msd coil pack and wires also rockin a black 2000 zx3 thats stock except for the full obx exhaust catless with a fart can(came with the car bought it for 3k last time home on leave) |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|