SVT shift knobs-Who wants something different? - Page 2 - Focaljet

**Hillyard** · 06-25-2008, 09:37 AM

Hey Steve,

I was on the phone with you when you wanted to start this group buy. So you know I want a red stitched one. You have all my info.

Zach

**FORDSVTPARTS** · 06-25-2008, 09:52 AM

I'm going to give this until the end of the week and then place the order so anyone that wants in should let me know soon.

**davlafont** · 06-25-2008, 10:37 AM

I'm in. PM sent.

**FORDSVTPARTS** · 06-25-2008, 10:54 AM

We're up to 11 shift knobs so far.

**CaysE** · 06-25-2008, 10:36 PM

kinky.

**bustonit** · 06-25-2008, 10:54 PM

Sweet knobs.....Uh...I mean Euro gear selectors FTW! Now if I get one, I'll have to do a tranny swap to use it. Damn atx. Bump for Steve hooking us up...again

**rythmbill** · 06-26-2008, 01:24 AM

I'm in for a red one. PM sent.

**FORDSVTPARTS** · 06-26-2008, 06:50 PM

The order has been placed so barring anything unforseen we should have these within a couple weeks.

I will be open to another order assuming everything goes well with this one.

**Hillyard** · 06-27-2008, 02:55 PM

Quote:

Originally Posted by FORDSVTPARTS

The order has been placed so barring anything unforseen we should have these within a couple weeks.

I will be open to another order assuming everything goes well with this one.

Awesome, I need to place another parts order soon so let me know when you get these in and then you can just ship everything at once.

Thanks,
Zach

**Patalrobn** · 06-28-2008, 09:29 PM

I feel so Honered that you put up Pix of my Knob!

You started a Sweet mod!!

BTW do we want to tell them the Menards way of keeping the boot up??

Just did it today and works Nice

Edit: This is what you will want to use to keep the boot up http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10051&langId=-1&catalogId=10053&productId=100139115&N=10000003+9 0262+501415

I believe that is the same thing it looks just like it. I paid like .47 cents for it at Menards. Steve had come in the store with me and helped find this Talk about service!!

It actually screws down on the threads for the shifter knob then pust it down just past the threads. Put the boot back on with a zip tie in the same place the other one was holding the boot to the old shifter. Then screw the New Knob on and Presto!! You have yourself a hot looking Knob!! That is about an 1" shorter than the old one.

**kimbo305** · 06-29-2008, 02:17 AM

Quote:

Originally Posted by Patalrobn

Edit: This is what you will want to use to keep the boot up http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10051&langId=-1&catalogId=10053&productId=100139115&N=10000003+9 0262+501415

Can you give search terms? The link doesn't seem to work.

**Patalrobn** · 06-29-2008, 10:22 AM

1 1/32 x 3/8
Slip Joint Washer

STK NO 38805B

We actullay got this a Menards now that I think about it .

Here is what it looks like.

**Hillyard** · 07-01-2008, 10:48 AM

Oh I can't wait for this to come in

**Idrivefokused** · 07-01-2008, 01:25 PM

Same here

**FORDSVTPARTS** · 07-03-2008, 06:23 PM

Still waiting for the guy to get them in, apparently Ford U.K. is no faster about stuff like this than Ford N.A.

Should be pretty soon though.

**Hillyard** · 07-15-2008, 11:25 AM

Any updates?

**FORDSVTPARTS** · 07-15-2008, 03:03 PM

Quote:

Originally Posted by Hillyard

Any updates?

I just sent him a PM checking on it.

**svt3d** · 07-16-2008, 11:13 PM

Man I totally missed this thread will you let me know when you are doing another order. I am in for a red stitched one when you do!

**FORDSVTPARTS** · 07-17-2008, 11:51 AM

Quote:

Originally Posted by svt3d

Man I totally missed this thread will you let me know when you are doing another order. I am in for a red stitched one when you do!

Just keep your eyes on our forum, I'm still waiting to see how this first transaction goes. (fingers crossed)

**Hillyard** · 07-18-2008, 04:13 PM

Quote:

Originally Posted by FORDSVTPARTS

Just keep your eyes on our forum, I'm still waiting to see how this first transaction goes. (fingers crossed)

Man the shift knobs must be held up in customs or something.

**Idrivefokused** · 07-19-2008, 01:25 AM

Quote:

Originally Posted by Hillyard

Man the shift knobs must be held up in customs or something.

Well tell them to let them go!

**kimbo305** · 07-19-2008, 01:26 AM

Quote:

Originally Posted by Idrivefokused

Well tell them to let them go!

the darker the berry the sweeter the juice!

**davlafont** · 07-19-2008, 08:45 AM

Quote:

Originally Posted by kimbo305

the darker the berry the sweeter the juice!

What kind of knobs are YOU talking about?!?

**kimbo305** · 07-19-2008, 09:19 AM

Quote:

Originally Posted by davlafont

What kind of knobs are YOU talking about?!?

I guess when I use that expression, I often interchange darker and riper.

**svt3d** · 07-23-2008, 07:00 PM

I am keeping my eyes peeled

06-25-2008, 09:37 AM	#26
Hillyard TEAM Member Join Date: Jul 2005 Location: Southern Indiana Posts: 282	Re: SVT shift knobs-Who wants something different? Hey Steve, I was on the phone with you when you wanted to start this group buy. So you know I want a red stitched one. You have all my info. Zach __________________ - Zach

06-25-2008, 09:52 AM	#27
FORDSVTPARTS TEAM Sponsor Join Date: Nov 2004 Location: Minnesota Posts: 5,436	Re: SVT shift knobs-Who wants something different? I'm going to give this until the end of the week and then place the order so anyone that wants in should let me know soon. __________________ We are Tousley Ford offering all OEM Ford and Ford Racing parts at 10% over cost. PM me here or call Steve at 1-800-328-9552 during regular business hours. Now accepting online orders here http://www.tousleyfordparts.com You can also find us here http://forums.focaljet.com/tousley-ford/ 2002 Silver SVT focus , custom CAI , Stage 2 throttle body, VF rear mount, FRPP 9mm wires, EAP/MACH HID's, Borla exhaust, K-W springs, FRPP UDP, Brisk LGS plugs, Screamin Demon coil, Diablo predator tune via Mike at Unique tuning. 153.27whp-140.56 lb.ft.

06-25-2008, 10:37 AM	#28
davlafont Senior TEAM Member Join Date: Jul 2002 Location: North Jersey Posts: 1,460	Re: SVT shift knobs-Who wants something different? I'm in. PM sent. __________________ Dave 2002SVTFocus #2629 Visit Dave's Daily Driver "When I take'er to the track she really shines; She always turns in the fastest time, My four-speed, dual-quad, positraction 409 (giddyup, giddyup, giddyup 409..." --The Beach Boys

06-25-2008, 10:54 AM	#29
FORDSVTPARTS TEAM Sponsor Join Date: Nov 2004 Location: Minnesota Posts: 5,436	Re: SVT shift knobs-Who wants something different? We're up to 11 shift knobs so far. __________________ We are Tousley Ford offering all OEM Ford and Ford Racing parts at 10% over cost. PM me here or call Steve at 1-800-328-9552 during regular business hours. Now accepting online orders here http://www.tousleyfordparts.com You can also find us here http://forums.focaljet.com/tousley-ford/ 2002 Silver SVT focus , custom CAI , Stage 2 throttle body, VF rear mount, FRPP 9mm wires, EAP/MACH HID's, Borla exhaust, K-W springs, FRPP UDP, Brisk LGS plugs, Screamin Demon coil, Diablo predator tune via Mike at Unique tuning. 153.27whp-140.56 lb.ft.

06-25-2008, 10:36 PM	#30
CaysE [FJ] This is worse than when the raccoon got caught in the copier! Join Date: Dec 2004 Location: Bloomfield, NJ Posts: 7,624	Re: SVT shift knobs-Who wants something different? kinky. __________________ 2008 Cannondale F4 ··· Hi-brite · no mods (yet) 2003 Vermilion Red SVTf ··· hehehehehehe strictly/focused "It would take a miracle to make the entire Focus community get along. FF vs FJ, F-P vs FS, tuner vs tuner, racer vs ricer. What can you do?"

06-25-2008, 10:54 PM	#31
bustonit Senior TEAM Member Join Date: Sep 2003 Location: The valley Posts: 2,820	Re: SVT shift knobs-Who wants something different? Sweet knobs.....Uh...I mean Euro gear selectors FTW! Now if I get one, I'll have to do a tranny swap to use it. Damn atx. Bump for Steve hooking us up...again

06-26-2008, 01:24 AM	#32
rythmbill Newbie Join Date: Nov 2007 Location: Tucson, AZ Posts: 4	Re: SVT shift knobs-Who wants something different? I'm in for a red one. PM sent.

06-26-2008, 06:50 PM	#33
FORDSVTPARTS TEAM Sponsor Join Date: Nov 2004 Location: Minnesota Posts: 5,436	Re: SVT shift knobs-Who wants something different? The order has been placed so barring anything unforseen we should have these within a couple weeks. I will be open to another order assuming everything goes well with this one. __________________ We are Tousley Ford offering all OEM Ford and Ford Racing parts at 10% over cost. PM me here or call Steve at 1-800-328-9552 during regular business hours. Now accepting online orders here http://www.tousleyfordparts.com You can also find us here http://forums.focaljet.com/tousley-ford/ 2002 Silver SVT focus , custom CAI , Stage 2 throttle body, VF rear mount, FRPP 9mm wires, EAP/MACH HID's, Borla exhaust, K-W springs, FRPP UDP, Brisk LGS plugs, Screamin Demon coil, Diablo predator tune via Mike at Unique tuning. 153.27whp-140.56 lb.ft.

06-28-2008, 09:29 PM	#35
Patalrobn Junior Member Join Date: Feb 2008 Posts: 91	Re: SVT shift knobs-Who wants something different? I feel so Honered that you put up Pix of my Knob! You started a Sweet mod!! BTW do we want to tell them the Menards way of keeping the boot up?? Just did it today and works Nice Edit: This is what you will want to use to keep the boot up http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10051&langId=-1&catalogId=10053&productId=100139115&N=10000003+9 0262+501415 I believe that is the same thing it looks just like it. I paid like .47 cents for it at Menards. Steve had come in the store with me and helped find this Talk about service!! It actually screws down on the threads for the shifter knob then pust it down just past the threads. Put the boot back on with a zip tie in the same place the other one was holding the boot to the old shifter. Then screw the New Knob on and Presto!! You have yourself a hot looking Knob!! That is about an 1" shorter than the old one. Last edited by Patalrobn : 06-29-2008 at 10:23 AM.

06-29-2008, 10:22 AM	#37
Patalrobn Junior Member Join Date: Feb 2008 Posts: 91	Re: SVT shift knobs-Who wants something different? 1 1/32 x 3/8 Slip Joint Washer STK NO 38805B We actullay got this a Menards now that I think about it . Here is what it looks like.

07-01-2008, 10:48 AM	#38
Hillyard TEAM Member Join Date: Jul 2005 Location: Southern Indiana Posts: 282	Re: SVT shift knobs-Who wants something different? Oh I can't wait for this to come in __________________ - Zach

07-01-2008, 01:25 PM	#39
Idrivefokused TEAM Member Join Date: Dec 2007 Location: Pomona, CA. Posts: 145	Re: SVT shift knobs-Who wants something different? Same here

07-03-2008, 06:23 PM	#40
FORDSVTPARTS TEAM Sponsor Join Date: Nov 2004 Location: Minnesota Posts: 5,436	Re: SVT shift knobs-Who wants something different? Still waiting for the guy to get them in, apparently Ford U.K. is no faster about stuff like this than Ford N.A. Should be pretty soon though. __________________ We are Tousley Ford offering all OEM Ford and Ford Racing parts at 10% over cost. PM me here or call Steve at 1-800-328-9552 during regular business hours. Now accepting online orders here http://www.tousleyfordparts.com You can also find us here http://forums.focaljet.com/tousley-ford/ 2002 Silver SVT focus , custom CAI , Stage 2 throttle body, VF rear mount, FRPP 9mm wires, EAP/MACH HID's, Borla exhaust, K-W springs, FRPP UDP, Brisk LGS plugs, Screamin Demon coil, Diablo predator tune via Mike at Unique tuning. 153.27whp-140.56 lb.ft.

07-15-2008, 11:25 AM	#41
Hillyard TEAM Member Join Date: Jul 2005 Location: Southern Indiana Posts: 282	Re: SVT shift knobs-Who wants something different? Any updates? __________________ - Zach

07-16-2008, 11:13 PM	#43
svt3d TEAM Member Join Date: Jun 2008 Location: Tacoma Posts: 222	Re: SVT shift knobs-Who wants something different? Man I totally missed this thread will you let me know when you are doing another order. I am in for a red stitched one when you do! __________________ 04 E4 ZX3 SVTF #450 of 1978 RED Army! My name is Steve McSaleen and I approved this message

07-23-2008, 07:00 PM	#50
svt3d TEAM Member Join Date: Jun 2008 Location: Tacoma Posts: 222	Re: SVT shift knobs-Who wants something different? I am keeping my eyes peeled __________________ 04 E4 ZX3 SVTF #450 of 1978 RED Army! My name is Steve McSaleen and I approved this message