[Ray]

In an effort to clean up this forum, and not have an inordinate amount of stickies, i think one, central post that references useful posts that reference useful posts would work.
The old stickies are going to be linked through this post.

Before You Start

• Want to Boost? Read this first!

Nitrous

• Nitrous FAQ

Turbochargers

• Precision Turbo FAQ
• Precision Turbo Part One - Components
• Bell Engineering / XIOS Turbo Kit
• DIY Turbo Kit List
• DIY Turbo Install - Focus Power Equipment
• Importance of Water in Water-Cooled Center Sections by Garrett

Superchargers

• Vortech FAQ
• JRSC FAQ
• JRSC Snout Rebuild (SVT M62)
• JRSC Pulley Install How To
• JRSC Vacuum Line Routing
• PowerWorks Blower Discussion
• Powerworks Blower Installation
• Vortech Inlet Pipe and Splash Shield

Tuning

• Discussion on Tuning
• Dyno Comparison & Discussion
• Engine Management - Stand Alone Versus SCT Pro Racer (Discussion)
• Megasquirt - Discussion

Engine Parts

• Engine Internals FAQ

Miscellaneous

• Snow Performance Water Injection
• THE Water Injection Thread
• Discussion on oil return
• J&S V1 Safeguard Wiring Diagram
• Forced Induction Dynos, Times, Specs
• Wideband O2 Options
• CHIBULLSAN's Custom Intake Manifold Creation - with discussion
• The Turbo Manifold Thread
• Let's Talk about Heatsoak - discussion
• Thermal Expansion of Manifolds, Welding - Discussion
• Unique But Useful FI Products
• EGT Manipulation - Discussion and info
• Potential failure of SVT intake manifold with FI - discussion and information
• Kenne Bell Boost A Pump Install and discussion
• Exhaust sizing discussion (flow, velocity, etc)
• Removing the AC w/o changing the belt
• Horsepower / Torque discussion w/ linked article from TopSpeed

 

[FSWerksVP]

Excellent work!

 

[Welding Rod]

Great call Demon!

 

[CWCZX3]

just need to put my post about engine internals in here.

 

[Ray]

done.

if people with experience on other options could start a FAQ, how to, etc, such as
<ul type="square">[*]Focus-Power
[*]Gude
[*]FMax
[*]Corky's kit
[*]Other options i'm missing
[/list]

 

[focaljet-1]

Thanks demonfire, looks great!

 

[Dudley]

demonfire - feel free to add this to the list of turbo kit write-ups:

XIOS/Bell Engineering Turbo Kit

That thread has stayed pretty clean, but I suppose you could cut and paste portions of it - whatever. I'll be updating the thread periodically as I refine the installation (I still have to do some minor bracket-fabbing, etc.).

 

[Ray]

updated with the bell engineering kit.

 

[Drabert]

can you add some water injection FAQ cuz they are starting to take over the board... i could really use one of those

 

[RoyLRedSVT]

Could there be an SVT sub-category in some of them, where it's appropriate?

 

[Ray]

Yes, i suppose there could, although most of the rules are the same. in each thread there are subsets of SVT tidbits.

 

[Blu_by_U_withmyZX3]

What about the procharger kit?

 

[Ray]

Blu, we add stuff to the list after we have a really good discussion on it. If you want to start a thread about the procharger, feel free.

 

[Blu_by_U_withmyZX3]

Wow that was a fast response. I am a newb when it comes to FI, so I was just checking out the thread to try and learn some things, and had wondered about the procharger kit. Hopefuly there will be some good discusions on it so I can learn more about it! Thanks for the answer.

 

[wife_hates_car]

Will the internals of a 2.3L handle low pressure boost?

I am thinking of installing a squires rear turbo, but I do not know of anyone boosting a PZEV?

 

[alx]

Why is it that none 99% of the turbo and supercharger kits out there only say up to 2003 for the Zetec? I have an '04 ZX3 2.0L Zetec, was there some kind of change I don't know about? I know there was some kind of fuel pump change, but is ECU different or something. I was pretty discouraged to find out that none of these kits say they work on '04.

 

[DisrupTer911]

they will work.

most of the time they don't update the sites.

as long as its a zetec it will work.

 

[hkysk8r07]

they will work.

most of the time they don't update the sites.

as long as its a zetec it will work.

some of the 03 and 04 cars started using the 2.3L Duratec

if you got a 2.0L zetec you should be good. although some have different kits for automatic and manual. thats really the only difference

 

[OneAMRadio]

All links are broke now.

-Ryan

 

[crimsonghost83]

The links are still broken.